Flight dynamics characteristics of canard rotor/wing aircraft in helicopter flight mode

The aerodynamic layout of the Canard Rotor/Wing(CRW) aircraft in helicopter flight mode differs significantly from that of conventional helicopters. In order to study the flight dynamics characteristics of CRW aircraft in helicopter mode, first, the aerodynamic model of the main rotor system is established based on the blade element theory and wind tunnel test results. The aerodynamic forces and moments of the canard wing, horizontal tail, vertical tail and fuselage are obtained via theoretical analysis and empirical formula. The flight dynamics model of the CRW aircraft in helicopter mode is developed and validated by flight test data. Next, a method of model trimming using an optimization algorithm is proposed. The flight dynamics characteristics of the CRW are investigated by the method of linearized small perturbations via Simulink. The trim results are consistent with the conventional helicopter characteristics, and the results show that with increasing forward flight speed, the canard wing and horizontal tail can provide considerable lift,which reflects the unique characteristics of the CRW aircraft. Finally, mode analysis is implemented for the linearized CRW in helicopter mode. The results demonstrate that the stability of majority modes increases with increasing flight speed. However, one mode that diverges monotonously,and the reason is that the CRW helicopter mode has a large vertical tail compared to the conventional helicopter. The results of the dynamic analysis provide optimization guidance and reference for the overall design of the CRW aircraft in helicopter mode, and the model developed can be used for control system design.     

动能拦截器运动伪装末制导律设计

针对动能拦截器末制导问题，基于运动伪装理论设计了末制导律和相应的脉冲宽度脉冲频率(PWPF)调节器。根据拦截器和目标在视线旋转坐标系下的相对运动关系建立了动力学模型。通过运动伪装特性得出的拦截条件推导出作用在视线法向上的制导指令表达式。在动能拦截器制导推力受限情况下，利用PWPF调节器调节制导指令。考虑系统的可控条件和拦截条件，对调节器参数进行了理论设计。运动伪装末制导律保证动能拦截器在制导过程起到伪装作用，具有较高的制导精度和较小的命中过载，同时经过参数设计后的PWPF调节器可以节省燃料。最后，通过数值仿真校验了所设计末制导律的正确性和有效性。     

微纳卫星混合推进技术研究综述

首先介绍了微纳卫星混合推进系统的特点与优势,总结了星载混合推进技术的发展现状,并结合微纳卫星动力系统要求,指出了星载混合推进技术的发展趋势及存在的问题.然后在此基础上,从卫星工程应用的角度,重点综述了星载混合推进系统需攻克的主要关键技术,包括先进一体化制造、可靠低功耗多次点火启动、比冲提升、高效燃烧等,并分析了相应关键...     

CFD predictions of LBO limits for aero-engine combustors using fuel iterative approximation

Lean blow-out (LBO) is critical to operational performance of combustion systems in propulsion and power generation. Current predictive tools for LBO limits are based on decadesold empirical correlations that have limited applicability for modern combustor designs. According to the Lefebvre’s model for LBO and classical perfect stirred reactor (PSR) concept, a load parameter (LP) is proposed for LBO analysis of aero-engine combustors in this paper. The parameters contained in load parameter are all estimated from the non-reacting flow field of a combustor that is obtained by numerical simulation. Additionally, based on the load parameter, a method of fuel iterative approximation (FIA) is proposed to predict the LBO limit of the combustor. Compared with experimental data for 19 combustors, it is found that load parameter can represent the actual combustion load of the combustor near LBO and have good relativity with LBO fuel/air ratio (FAR). The LBO FAR obtained by FIA shows good agreement with experimental data, the maximum prediction uncertainty of FIA is about ±17.5%. Because only the non-reacting flow is simulated, the time cost of the LBO limit prediction using FIA is relatively low (about 6 h for one combustor with computer equipment of CPU 2.66 GHz · 4 and 4 GB memory), showing that FIA is reliable and efficient to be used for practical applications.     

空间大型结构体组装接口设计及装配性能分析

为满足超大型(公里级)空间结构在轨组装的需求,设计了一种全新的空间大型结构体组装接口并对其装配性能进行了详细的分析。首先,详细设计了一种纯机械式双锁定组装接口。其次,通过建立接口运动学模型,对组装接口的容差性能进行了分析,得出 X 方向容差为14.25 mm, Z 方向容差为15.84 mm,绕 X,Y,Z 三个轴的角度容差分别为5.65°、5.51°和5.34°。最后,对对接接口进行了ADAMS仿真分析,验证了容差分析的正确性,得到了对接机构接触力与静摩擦系数、机械臂推力、碰撞锥角之间的非线性影响关系,为空间对接机构的设计奠定了基础。     

Experimental research of air-throttling ignition for a scramjet at Ma 6.5

An experimental investigation on ignition characteristics with air-throttling in an ethylene-fueled scramjet under flight Ma 6.5 conditions was conducted.The dynamic process of air-throttling ignition was explored systematically.The influences of throttling parameters,i.e.,throttling mass rate and duration,were investigated.When the throttling mass rate was 45% of the inflow mass rate,ambient ethylene could be ignited reliably.The delay time from ignition to throttling was about 45–55 ms.There was a threshold of throttling duration under a certain throttling mass rate.It was shorter than 100 ms when the throttling mass rate was 45%.While a 45%throttling mass rate would make the shock train propagate upstream to the isolator entry in about10–15 ms,four lower throttling mass rates were tested,including 30%,25%,20%,and 10%.All of these throttling mass rates could ignite ethylene.However,combustion performances varied with them.A higher throttling mass rate made more ethylene combust and produced higher wall pressure.Through these experiments,some aspects of the relationships between ignition,flame stabilization,combustion efficiency,and air-throttling parameters were brought to light.These results could also be a benchmark for CFD validation.     

A New Probabilistic Transformation in Generalized Power Space

The mapping from the belief to the probability domain is a controversial issue, whose original purpose is to make (hard) decision, but for contrariwise to erroneous widespread idea/claim, this is not the only interest for using such mappings nowadays. Actually the probabilistic transformations of belief mass assignments are very useful in modern multitarget multisensor tracking systems where one deals with soft decisions, especially when precise belief structures are not always available due to the existence of uncertainty in human being's subjective judgments. Therefore, a new probabilistic transformation of interval-valued belief structure is put forward in the generalized power space, in order to build a subjective probability measure from any basic belief assignment defined on any model of the frame of discernment. Several examples are given to show how the new transformation works and we compare it to the main existing transformations proposed in the literature so far. Results are provided to illustrate the rationality and efficiency of this new proposed method making the decision problem simpler.     

空中乘务专业学生职业素质能力的构成与培养途径

结合空中乘务专业学生职业素质能力构成的思想、专业以及行为素质能力三方面的要求,阐述了职业素质的内涵.通过分析该专业职业素质能力构成,探索提高高职院校空中乘务专业学生的职业素质能力的新途径.     

离心叶轮二元叶片型线的优化设计及分析

为改善优化离心叶轮的气动性能,提出离心叶轮二元叶片型线的一种优化设计方法,即通过给定流道平均相对速度沿半径的分布规律,在叶轮轮盘轮盖线不变的前提下,设计出一类叶片型线,并利用全三维数值模拟计算得到最佳性能的叶轮。孤立叶轮的计算表明,大部分工况的性能均明显优于原始叶轮,在设计点处效率提高12%,压升提高8.9%,流道中低速区的面积大大减小,静压场分布更加均匀。最佳叶轮配上原始蜗壳进行整机计算,结果表明,设计点效率提高10%以上,且消除了蜗壳出口段的倒流现象,但在大流量工况下压升量有所下降。