An Upper Bound on Detection Probability for Fluctuating Signals

In the theory of signal detectability, the signal-to-noise ratio (SNR), defined as the quotient of the average received signal energy and the spectral density of the white Gaussian noise, is a fundamental parameter. For a signal which is exactly known, or known except for a random phase, this ratio uniquely defines the detection performance which can be achieved with a matched filter receiver. However, when the signal amplitude is a random parameter, the detection performance is changed and must be determined from the probability density function (pdf) of the amplitude. Relative to the case of a constant signal amplitude, such signal amplitude fluctuation usually degrades performance when a high probability of detection (Pd) is required, but improves performance at low values of Pd; the corresponding change in the required SNR is the so-called signal fluctuation loss Lf. Thus, since Lf in some cases represents an improvement in performance for low values of Pd, a question of at least theoretical interest is: how large might this improvement be, when the class of all signal amplitude pdf's is considered. The solution, presented here, results in a lower bound on the signal fluctuation loss Lf as a function of Pd, or equivalently an upper bound on Pd as a function of SNR. The corresponding most favorable pdf was determined using the Lagrange multiplier technique and results of a numerical maximization are included to provide insight into the general properties of the solution.     

Minimal-Order Models for False-Alarm Calculations on Sliding Windows

A procedure is developed to obtain practical numerical results in connection with the m-out-of-n sliding-window detection problem. This effort was motivated by difficulties with previous approaches involving approximation, Markov models, and Monte Carlo simulation. Generating-function methods were found to be unsatisfactory for window lengths greater than 6 due to their complexity. Instead, a Markov model is described that is then constructively reduced to the minimum number of state variables. The results are derived for binary strings with intersymbol correlation. Computational aids are discussed for obtaining design information, such as quantiles, from the minimal-order Markov models. Numerical results are given comparing the methods of the paper with a "jumping" window approximation for an 8/10 problem.     

Approximate Ellipsoidal-Earth Equations for Mapping and Fix-Taking Calculations

Approximate equations are developed for converting geodetic coordinates to a local north-east-down (NED) Cartesian coordinate system, and it is shown that good accuracy can be obtained if the ellipsoidal shape of the Earth is taken into account.     

On-Line Computer for Transient Turbine Cascade Instrumentation

A 32-channel computer based data acquisition and processing system em has been developed for use with the new type of transient cascade facility at Oxford. This is used for testing turbine blades and nozzle guide vanes at full-scale engine Reynolds and Mach numbers ers with correct wallto-flow temperature ratios. A novel technique for processing transient heat transfer data from thin film surface resistance thermometers has been developed. Measurements of surface ace pressure around blades, and of the upstream turbulence level have been made. The cascade and instrumentation are shown to have advantages both in cost and effectiveness over continuous running cascades.     

Wide-Aperture Digital VOR

The very high frequency (VHF) omnirange has undergone a number of evolutionary changes in the past 30 years. Early measurements of large errors led to the development of the Doppler VHF omnidirectional irectioal range (VOR) and its use. Further developments have been the precision multilobe VOR and the precision Doppler VOR. Interest in area navigation has led to the desire for a VOR greatly superior to any so far developed. Specifically, the objectives of the improved VOR would be a system that would significantly reduce magnitude of siting errors, provide greater accuracy and use digital techniques to simplify processing. ssing. The wide-aperture digital VOR described herein has been developed to meet these objectives. Its design is based on the crossed-pair interferometer principle where eight such pairs are energized successively by a set of pulses and phase shifts. The time multiplexed signal, detected by the aircraft receiver, is processed and simple digital computations are performedto determine the angular coordinates. The performance improvements have been achieved by the combination of using a 275-ft antenna aperture, and the use of digital techniques to generate the ground-radiated navigational signals and to process them in the airborne processor. Field tests of the feasibility model indicate it is a high performance ance system, capable of achieving an order of magnitude improvement in both site error reduction and in accuracy compared to present VOR systems. The measured accuracies were 0.11-degree standard deviation.     

An investigation into the nature of the 4.4 hr periodic source 4U1755-33

We present the results of a continuous 18 hour observation of 4U1755-33 made with the European Space Agency's EXOSAT Observatory. Four 50 min dips in X-ray intensity were observed equally spaced with a period of 4.4 hrs, confirming the periodicity first suggested in White et al. (1984). The dips are spectrally independent. We examine the properties of 4U1755-33 and conclude that the source is most probably point-like and that the metallicity of the absorbing material is at least 600 times less than cosmic values.     

The Calculation of Frequency-Modulation Distortion in Linear Networks

A numerical method is developed for the calculation of steady-state FM distortion in a linear passive network from the character of the FM signal input and the steady-state transfer characteristics of the network. The method of calculating FM distortion requires the solution of a finite set of linear equations which is accomplished readily by a digital computer. To illustrate the use of the method, the FM distortion introduced by a Chebyshev-response bandpass filter is calculated for a range of network and input signal parameters.     

Error Analysis of Space-Stable Inertial Navigation Systems

The error equations for a space-stable inertial navigation system are derived. This is done by directly perturbing the mechanization equations in the inertial frame and then transforming in open-loop fashion to the local-level frame. A rotating inertial platform and velocity and altitude damping are considered. The relations between errors in space-stable and local-level systems are noted. Numerical results are presented for certain random error sources.     

The Detection Performance of the Siebert and Dicke-Fix CFAR Radar Detectors

The Siebert and the Dicke-fix CFAR radar detectors, used to maintain a constant false alarm rate (CFAR) in radar receivers under very similar circumstances, are considered. The Siebert detector represents the maximum-likelihood detection procedure for a signal in Gaussian noise of unknown power level, whereas the Dicke-fix makes use of a bandpass limiter to normalize the input and thus ensure a constant false alarm rate. The detection performance of the two detectors is determined and a comparison shows that over a wide range of parameters, the Dicke-fix introduces a loss which is approximately 1 B larger than for the Siebert detector.     

A Closely Regulated TWT Converter

The design concept for the traveling wave tube amplifier converter for possible use in the Thermoelectric Outer Planet Spacecraft (TOPS) is presented. An unusual combination of semiconductors and magnetics were utilized to achieve very stable voltage regulation on a number of separate outputs to satisfy the requirements of a high-power traveling wave tube (TWT), and at the same time operate at an efficiency of better than 90 percent from a 30-volt source. The circuitry consists of an output filter, an auxiliary Jensen oscillator driving a high-reactance transformer to provide current limiting to the heater, a variable time delay, a main Jensen oscillator driving the power transformer with a maximum step-up ratio of 120 to 1, and series transistorized post regulators to provide precise voltage adjustment and low output impedance. This paper discusses the design of the high-reactance transformer and the high step-up ratio transformer, as well as the high-voltage series regulators that are limited in range and operate at the top of the unregulated output voltage. Test data is presented, and details of current transients caused by charging the filter circuits, input current ripple, and output voltage ripples are considered. The circuit provides better than 0.5 percent regulation against load change, input voltage change, and over-operating temperature range of from -20 to + 80°C, with output ripple voltage of less than 2 volts peak-to-peak on top of the 3600-Vdc output. The measured efficiency was typically 87 percent. and recommendations are included to improve this to in excess of 90 percent.