The effect of geocenter motion on Jason-2 orbits and the mean sea level

We compute a series of Jason-2 GPS and SLR/DORIS-based orbits using ITRF2005 and the std0905 standards ( Lemoine et al., 2010). Our GPS and SLR/DORIS orbit data sets span a period of 2 years from cycle 3 (July 2008) to cycle 74 (July 2010). We extract the Jason-2 orbit frame translational parameters per cycle by the means of a Helmert transformation between a set of reference orbits and a set of test orbits. We compare the annual terms of these time-series to the annual terms of two different geocenter motion models where biases and trends have been removed. Subsequently, we include the annual terms of the modeled geocenter motion as a degree-1 loading displacement correction to the GPS and SLR/DORIS tracking network of the POD process. Although the annual geocenter motion correction would reflect a stationary signal in time, under ideal conditions, the whole geocenter motion is a non-stationary process that includes secular trends. Our results suggest that our GSFC Jason-2 GPS-based orbits are closely tied to the center of mass (CM) of the Earth consistent with our current force modeling, whereas GSFC’s SLR/DORIS-based orbits are tied to the origin of ITRF2005, which is the center of figure (CF) for sub-secular scales. We quantify the GPS and SLR/DORIS orbit centering and how this impacts the orbit radial error over the globe, which is assimilated into mean sea level (MSL) error, from the omission of the annual term of the geocenter correction. We find that for the SLR/DORIS std0905 orbits, currently used by the oceanographic community, only the negligence of the annual term of the geocenter motion correction results in a – 4.67 ± 3.40 mm error in the Z-component of the orbit frame which creates 1.06 ± 2.66 mm of systematic error in the MSL estimates, mainly due to the uneven distribution of the oceans between the North and South hemisphere.     

Onboard Pilot and Remote Copilot for Aviation Safety, Security & Cost Reduction

The 21^st Century Aviation System can reduce the cost of flying, while substantially increasing the safety and security of cargo and carrier aircraft with an onboard pilot/s and a remote copilot residing in a secure ground-based simulator.     

Vibrations of a shell with the discretely attached dynamic subsystem

A problem on low vibrations of a thin spherical shell is considered. A solid of finite dimensions is discretely attached to the shell by means of an elastic rod system. The calculation examples are presented.     

A technique of analyzing critical forces and moments for isotropic rods of arbitrary cross-section in the general case of their complex resistance

The derivation of parametric equations for a limiting surface in the space of internal forces and moments that act in the rod cross-sections, using the basic concepts of plasticity theory and conventional hypotheses of the rod theory, is presented. The plastic properties of rod material are described by the Mises criterion. A case of small displacements and strains under static simple loading is considered. The results of solving a number of problems of constructing limiting curves in the planes of internal forces and moments are given.     

Confronting Observations and Modeling: The Role of the Interstellar Magnetic Field in Voyager 1 and 2 Asymmetries

Magnetic effects are ubiquitous and known to be crucial in space physics and astrophysical media. We have now the opportunity to probe these effects in the outer heliosphere with the two spacecraft Voyager 1 and 2. Voyager 1 crossed, in December 2004, the termination shock and is now in the heliosheath. On August 30, 2007 Voyager 2 crossed the termination shock, providing us for the first time in-situ measurements of the subsonic solar wind in the heliosheath. With the recent in-situ data from Voyager 1 and 2 the numerical models are forced to confront their models with observational data. Our recent results indicate that magnetic effects, in particular the interstellar magnetic field, are very important in the interaction between the solar system and the interstellar medium. We summarize here our recent work that shows that the interstellar magnetic field affects the symmetry of the heliosphere that can be detected by different measurements. We combined radio emission and energetic particle streaming measurements from Voyager 1 and 2 with extensive state-of-the art 3D MHD modeling, to constrain the direction of the local interstellar magnetic field. The orientation derived is a plane ～60°–90° from the galactic plane. This indicates that the field orientation differs from that of a larger scale interstellar magnetic field, thought to parallel the galactic plane. Although it may take 7–12 years for Voyager 2 to leave the heliosheath and enter the pristine interstellar medium, the subsonic flows are immediately sensitive to the shape of the heliopause. The flows measured by Voyager 2 in the heliosheath indicate that the heliopause is being distorted by local interstellar magnetic field with the same orientation as derived previously. As a result of the interstellar magnetic field the solar system is asymmetric being pushed in the southern direction. The presence of hydrogen atoms tend to symmetrize the solutions. We show that with a strong interstellar magnetic field with our most current model that includes hydrogen atoms, the asymmetries are recovered. It remains a challenge for future works with a more complete model, to explain all the observed asymmetries by V1 and V2. We comment on these results and implications of other factors not included in our present model.     

A capillary-driven root module for plant growth in microgravity.

A new capillary-driven root module design for growing plants in microgravity was developed which requires minimal external control. Unlike existing systems, the water supply to the capillary-driven system is passive and relies on root uptake and media properties to develop driving gradients which operate a suction-induced flow control valve. A collapsible reservoir supplies water to the porous membrane which functions to maintain hydraulic continuity. Sheet and tubular membranes consisting of nylon, polyester and sintered porous stainless steel were tested. While finer pore sized membranes allow greater range of operation, they also reduce liquid flux thereby constraining system efficiency. Membrane selection should consider both the maximum anticipated liquid uptake rate and maximum operating matric head (suction) of the system. Matching growth media water retention characteristics to the porous membrane characteristics is essential for supplying adequate liquid flux and gas exchange. A minimum of 10% air-filled porosity (AFP) was necessary for adequate aeration. The capillary-driven module maintained hydraulic continuity and proper gas exchange rates for more than 80 days in a plant growth experiment.     

Optical communication systems for avionics

Avionic information processing and transmission requirements are increasing geometrically, with no end in sight, The only feasible way to meet them is to incorporate fiber-optic communication systems into avionic platforms, Such systems can be employed to replace standard electronic components, to augment existing systems, or to enable new technologies. In this paper, we survey the field of low-power communication systems from the avionics engineering perspective. We review the fundamental merits of optical fiber for information transmission and discuss various information modulation schemes. These modulation techniques determine the performance requirements for laser transmitters, We describe the horizontal- and vertical-cavity semiconductor lasers currently available for these systems, and measure their performance against the additional environmental constraints of avionics platforms. Finally, we outline expected near- and far-term trends in system and device development     

Biodosimetry of heavyions by interphase chromosome painting

We report measurements of chromosomal aberrations in peripheral blood lymphocytes from cancer patients undergoingradiotherapy treatment. Patients with cervix or esophageal cancer were treated with 10 MV X-rays produced at a LINAC accelerator, or high-energy carbon ions produced at the HIMAC accelerator at the National Institute for Radiological Sciences (NIRS) in Chiba. Blood samples were obtained before, during, and after the radiation treatment. Chromosomes were prematurely condensed by incubation in calyculin A. Aberrations in chromosomes 2 and 4 were scored after fluorescence in situ hybridization with whole-chromosome probes. Pre-treatment samples were exposed in vitro to X-rays, individual dose-response curves for the induction of chromosomal aberrations were determined, and used as calibration curves to calculate the effective whole-body dose absorbed during the treatment. This calculated dose, based on the calibration curve relative to the induction of reciprocal exchanges, has a sharp increase after the first few fractions of the treatment, then saturates at high doses. Although carbon ions are 2–3 times more effective than X-rays in tumor sterilization, the effective dose was similar to that of X-ray treatment. However, the frequency of complex-type chromosomal exchanges was much higher for patients treated with carbon ions than X-ray.     

Evolution of galaxy cluster scaling from XMM-Newton observation of the galaxy clusters at z ⩾ 0.4

We present here new XMM-Newton observations of 3 relatively cool clusters at z ≈ 0.4, complemented by archival observations of 3 other clusters at similar redshift. We derived the M–T and R–T relations from the hydrostatic equation using an isothermal temperature distribution.     

Simultaneous measurement of multiple radiation-induced protein expression profiles using the Luminex(TM) system.

Space flight results in the exposure of astronauts to a mixed field of radiation composed of energetic particles of varying energies, and biological indicators of space radiation exposure provides a better understanding of the associated long-term health risks. Current methods of biodosimetry have employed the use of cytogenetic analysis for biodosimetry, and more recently the advent of technological progression has led to advanced research in the use of genomic and proteomic expression profiling to simultaneously assess biomarkers of radiation exposure. We describe here the technical advantages of the Luminex(TM) 100 system relative to traditional methods and its potential as a tool to simultaneously profile multiple proteins induced by ionizing radiation. The development of such a bioassay would provide more relevant post-translational dynamics of stress response and will impart important implications in the advancement of space and other radiation contact monitoring.