Design study for a three-meter balloon-borne telescope for far infrared and submillimeter astronomy

A NASA supported design study is being carried out for a three-meter balloon-borne far infrared and submillimeter telescope. The goal of this project is to provide a facility for frequent flights for photometry, spectroscopy, and imaging in the spectral region 30 micrometers to 1 millimeter. It is intended to provide a scientific and technical step on the way to a large submillimeter telescope in space in the future. The study is concentrating on areas where technical advances are required: materials and fabrication techniques for lightweight primary mirrors, telescope and gondola structure, and pointing and stabilization. We are carrying out a design optimization and environmental test program of state-of-the-art carbon fiber reinforced plastic sandwich panels in collaboration with Dornier Systems. Similar efforts are being pursued for very lightweight molded glass mirrors. Innovative approaches to the telescope support and stabilization are being explored for achieving the required 1 arcsecond pointing stability.     

Preliminary results of Cytos 2 experiment.

Cytos 2 experiment, carried out during the French-Soviet manned flight (July 1982), has studied the antibiotics sensitivity of bacteria cultivated in vitro during the orbital flight. The results show an increase of the antibiotics resistance and a larger thickness of the cellular envelope for the inflight cells. The increase of antibiotics resistance can be related to a stimulating effect of space on the cell growth rate or to changes of the cellular envelope structure.     

Investigation of natural and artificial stimulation of the ionospheric Alfvén resonator at high latitude

A brief review is provided of recent progress in understanding the ionospheric Alfvén resonator (IAR) at high latitude. Firstly, naturally occurring resonances of the IAR as detected by pulsation magnetometers in the auroral zone at Sodankylä and in the polar cap at Barentsburg are considered. The characteristics of the IAR in the two regions are broadly similar, although the effects of solar illumination are less clear at the higher latitudes. Secondly we review recent attempts to stimulate the IAR through high-power radio frequency experiments both in the auroral zone at Tromsø with the European Incoherent SCATter (EISCAT) heater, and within the polar cap at Longyearbyen with the Space Plasma Exploration by Active Radar (SPEAR) facility. In the auroral zone at, Tromsø the stimulated IAR has been observed by ground-based magnetometers, and through electron acceleration observed on the FAST spacecraft. At SPEAR in the polar cap, the stimulated IAR has been investigated, with ground magnetometers, with the first results indicative of a positive detection.     

A sample collector for robotic sample return missions III: Impact survivability studies

Laboratory impact tests have been performed on experimental versions of a proposed robotic sample collector for extraterrestrial samples. The collector consists of a retractable aluminum ring containing an impregnable silicone compound that is pressed into the surface of the body to be sampled. As part of a comprehensive program to evaluate this idea, we have performed tests to determine if the samples embedded in the collector medium can survive the impact forces experienced during direct reentry, such as that of the recent Genesis sample return mission. For the present study, samples of sand, rock, glass, and chalk were subjected to decelerations of 1440–2880 g using drop tests. We found that even the most fragile samples, chosen to be representative of a wide range of the types of materials found on the surface of asteroids that have currently been studied, can withstand impacts of the intensity experienced by a sample return capsule during direct reentry.     

Distribution and variability of accelerated electrons at Mars

We investigate accelerated electrons observed by Mars Global Surveyor (MGS), using data from the Electron Reflectometer (ER) instrument. We find three different types of accelerated electron events. Current sheet events occur over regions with weak or no crustal fields, have the highest electron energy fluxes, and are likely located on draped magnetotail fields. Extended events occur over regions with moderate crustal magnetic fields, and are most often observed on closed magnetic field lines. Localized events have the lowest energy fluxes, occur in strong magnetic cusp regions, and are the most likely kind of event to be found on open magnetic field lines. Some localized events have clear signatures of field-aligned currents; these events have much higher electron fluxes, and are preferentially observed on radially oriented open magnetic field lines. Electron acceleration events, especially localized events, are similar in many ways to events observed in the terrestrial auroral zone. However, physical processes related to those found in the terrestrial cusp and/or plasmasheet could also be responsible for accelerating electrons at Mars.     

Active aeroelastic control over a four control surface wing model

This paper describes the procedure implemented to design, develop and test an aeroelastic control system installed on a forward swept wing of the aeroelastic demonstrator X-DIA. A control method directly based on Nissim aerodynamic energy concept has been chosen. Two different modeling techniques have been adopted for the calculation of generalized aerodynamic forces, such as doublet lattice method and computational fluid dynamics and the obtained results are finally compared. The latter approach, applied to better estimate the control surfaces effectiveness, requires the capability to correctly model the control surface rotation and the grid deformation, usually addressed as non-trivial problems in CFD based aeroelastic analysis. A genetic algorithm optimization technique has been adopted to state and refine all the control gains.     

Cometary Refractory Grains: Interstellar and Nebular Sources

Comets are heterogeneous mixtures of interstellar and nebular materials. The degree of mixing of interstellar sources and nebular sources at different nuclear size scales holds the promise of revealing how cometary particles, cometesimals, and cometary nuclei accreted. We can ascribe cometary materials to interstellar and nebular sources and see how comets probe planet-forming process in our protoplanetary disk. Comets and cometary IDPs contain carbonaceous matter that appears to be either similar to poorly-graphitized (amorphous) carbon, a likely ISM source, or highly labile complex organics, with possible ISM or outer disk heritage. The oxygen fugacity of the solar nebula depends on the dynamical interplay between the inward migration of carbon-rich grains and of icy (water-rich) grains. Inside the water dissociation line, OH^? reacts with carbon to form CO or CO₂, consuming available oxygen and contributing to the canonical low oxygen fugacity. Alternatively, the influx of water vapor and/or oxygen rich dust grains from outer (cooler) disk regions can raise the oxygen fugacity. Low oxygen fugacity of the canonical solar nebula favors the condensation of Mg-rich crystalline silicates and Fe-metal, or the annealing of Fe-Mg amorphous silicates into Mg-rich crystals and Fe-metal via Fe-reduction. High oxygen fugacity nebular conditions favors the condensation of Fe-bearing to Fe-rich crystalline silicates. In the ISM, Fe-Mg amorphous silicates are prevalent, in stark contrast to Mg-rich crystalline silicates that are rare. Hence, cometary Mg-rich crystalline silicates formed in the hot, inner regions of the canonical solar nebula and they are the touchstone for models of the outward radial transport of nebular grains to the comet-forming zone. Stardust samples are dominated by Mg-rich crystalline silicates but also contain abundant Fe-bearing and Fe-rich crystalline silicates that are too large (?0.1 μm) to be annealed Fe-Mg amorphous silicates. By comparison with asteroids, the Stardust Fe-bearing and Fe-rich crystalline silicates suggests partial aqueous alteration in comet nuclei. However, aqueous alteration transforms Fe-rich olivine to phyllosilicates before Mg-rich olivine, and Stardust has Mg-rich and Fe-rich olivine and no phyllosilicates. Hence, we look to a nebular source for the moderately Fe-rich to nearly pure-Fe crystalline silicates. Primitive matrices have Mg-Fe silicates but no phyllosilicates, supporting the idea that Mg-Fe silicates but not phyllosilicates are products of water-rich shocks. Chondrule-formation is a late stage process in our protoplanetary disk. Stardust samples show comet 81P/Wild 2 formed at least as late to incorporate a few chondrules, requiring radial transport of chondrules out to perhaps >20 AU. By similar radial transport mechanisms, collisional fragments of aqueously altered asteroids, in particular achondrites that formed earlier than chondrules, might reach the comet-forming zones. However, Stardust samples do not have phyllosilicates and chondrules are rare. Hence, the nebular refractory grains in comet 81P/Wild 2, as well as other comets, appear to be pre-accretionary with respect to asteroid parent bodies. By discussing nebular pathways for the formation of Fe-rich crystalline silicates, and also phyllosilicates and carbonates, we put forth the view that comets contain both the interstellar ingredients for and the products of nebular transmutation.     

Experimental studies of the impulsive ultrasonic machining by a tool with an intermediate striker

Some experimental data on the process of impulsive ultrasonic machining are presented. Also given are the data on variations in the impulsive vibration frequency of a workpiece and a tool.     

Exoplanet Transit Spectroscopy and Photometry

Photometry and spectroscopy of extrasolar planets provides information about their atmospheres and surfaces. From extrasolar planet spectra and photometry we can infer the composition and temperature of the atmospheres as well as the presence of molecular species, including biosignature gases or surface features. So far photometry has been published for three different transiting hot Jupiters (gas giant planets in short-period orbits), opening the era of comparative exoplanetology.     

Systems integration, user interface design, and tower air trafficcontrol

Tower air traffic control is currently performed using several unintegrated systems. While each of these systems supports performing an isolated task, the compilation of tools presents a number of challenges. This paper reports ways in which the Tower Control Computer Complex (TCCC) will support and enhance user management of numerous systems. Areas that will be notably improved include the consistency in the user interface of the air traffic control toolset, the task of manually integrating tools and information, toolset alert management, and toolset organization and administration