Sequences and arrays with perfect periodic correlation

Properties and methods for synthesizing sequences with perfect periodic autocorrelation functions and good energy efficiency are discussed. The construction is extended to two-dimensional perfect arrays. The construction methods used are based mainly on a search in the frequency domain and on a multiplication theorem for periodic sequences and arrays     

Temporal decorrelation of X-band backscatter from wind-influencedvegetation

The temporal decorrelation characteristics of X-band radar backscatter from wind-influenced vegetation were investigated using a short-range CW radar. Radar reflectance data were gathered on various types of individual trees from a distance of approximately 30 m. The windspeed was monitored during each measurement, which lasted 5 s. The crown cover and the mean leaf area of the trees were also recorded. Autocovariance plots were generated for each measurement, from which the decorrelation time was estimated. As expected, the return signals decorrelated faster at higher wind speeds. However, the decorrelation time was also found to depend on the tree type, tree structure, and leaf cover characteristics. Measured decorrelation times for moderate winds (7-9 m/s) were often between 40-60 ms, although the lowest decorrelation time measured under these conditions was 14 ms for the Eastern Cottonwood. In lighter winds (1-4 m/s), decorrelation times were much longer, and there was substantial spread in the data     

Prebiotic oligodeoxynucleotide synthesis in a cyclic evaporating system at low temperatures.

Deoxynucleoside 5'-monophosphates were condensed by cyanamide or by l-ethyl-3-(3-dimethylaminopropyl) carbodiimide in the presence of ammonium chloride at 0 degree, 37 degrees or 60 degrees C through several cycles of evaporation to dryness with replenishment of all reactants at each cycle. We found that at 37 degrees or 60 degrees cyanamide gives distinctly more high molecular weight material than does carbodiimide. Indeed, the yield of condensed products for the cyanamide reaction (dimers and higher oligomers) was found to be between 60 percent and 80 percent. The molecular weight distribution of the product shifts to higher molecular weights as cycling continues at 37 degrees or 60 degrees for both condensing agents. The water soluble carbodiimide gives higher yields of low molecular weight product but much lower yields of the higher molecular weight products. At 0 degree yields of high molecular weight product were low for both condensing agents. Results of characterization of the products demonstrate the synthesis of oligodeoxynucleotides including tetramers, with 3'-5' phosphodiester linkages.     

Visual thematic mapping from Landsat and collateral data in support of mineral development

Over the past ten years, the authors and their associates have used Landsat images and collateral data to prepare visual thematic maps. The data are used in a projection-compositor (Procom) system that enlarges Landsat images and other data to scales as great as 1:15 000. Revisions of existing maps for simple themes (e.g. topographic maps) can be completed quickly, accurately and inexpensively. Complex themes, such as geological formations and structures, can be mapped through the optical merging of collateral data sets (e.g. Landsat, geophysics, geology) at a common scale. Such mapping has led to the recognition of a non-parallactic means of obtaining whole image stereo-models with large vertical exaggerations using Landsat images.     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

PMHT: problems and some solutions

The probabilistic multihypothesis tracker (PMHT) is a target tracking algorithm of considerable theoretical elegance. In practice, its performance turns out to be at best similar to that of the probabilistic data association filter (PDAF); and since the implementation of the PDAF is less intense numerically the PMHT has been having a hard time finding acceptance. The PMHT's problems of nonadaptivity, narcissism, and over-hospitality to clutter are elicited in this work. The PMHT's main selling-point is its flexible and easily modifiable model, which we use to develop the "homothetic" PMHT; maneuver-based PMHTs, including those with separate and joint homothetic measurement models; a modified PMHT whose measurement/target association model is more similar to that of the PDAF; and PMHTs with eccentric and/or estimated measurement models. Ideally, "bottom line" would be a version of the PMHT with clear advantages over existing trackers. If the goal is of an accurate (in terms of mean square error (MSE)) track, then there are a number of versions for which this is available.     

Advanced optical processors for multiple degree-of-freedom objectrecognition

Several optical pattern recognition techniques suitable for multiple-degree-of-freedom object recognition are described. These include a correlator, an associate processor, and three feature extractors using moments, chord distributions, and a space-variant feature space. The processing architectures, the algorithm details, and initial results obtained for each approach are presented     

Drop motion in a rotating immiscible liquid body

The interaction of liquids is an important part of many processes and is often used for such purposes as causing a separation of solution components by mass transfer between phases, allowing a chemical reaction between liquids or their components, providing direct contact heating or cooling, or creating emulsions. Containerless space processing may well involve the interaction of liquids in the form of drops. For example it may be desirable to form an alloy in space by merger of two or more drops. Encapsulation of a volatile liquid by a second less volatile and immiscible liquid might be a means for avoiding volatilization. Rotation of such systems would enhance mixing where desirable and/or provide means for drop management. In this study, single drop behavior in rotating liquid bodies is studied experimentally.     

Convective motions in liquid metals for material processings. Numerical simulation of oscillation regimes and effect of rotation

The paper is concerned with the numerical simulation and the analysis of some kinds of flow regimes which can develop in Bridgman and Czochralski systems for material processings. The flows in the liquid phase are investigated considering two-dimensional and axisymmetric models. The time-dependent regimes were studied for a zero-Prandtl-number fluid layer confined inside a two-dimensional cavity of aspect ratio (length-to-height) A=4, involving a stress-free upper surface and submitted to a horizontal temperature gradient. The range of Grashof number was varied up to the conditions at which the flow goes from oscillatory to chaotic type behaviours. The combined influence of the temperature gradients and of the rotations of the crucible and of the seed/crystal was investigated for a Czochralski model. The axisymmetric regimes were studied for a Pr_m=0.015 liquid melt confined inside a cylindrical crucible of aspect ratio (height-to-radius) A_m=2, and coupled to a viscous encapsulant liquid layer (10<Pr_e<1200) of aspect ratio A_e=0.5. A number of steady and (transient) time-dependent flow patterns are identified.