燃气轮机滚动轴承故障模式及延寿方法

分析了燃气轮机滚动轴承常见的10种故障模式及其产生原因,研究了相应的延寿方法及其延寿机理。     

基于平方和方法的H∞最优励磁控制

为了改善电力系统在干扰信号下的稳定性,在单机无穷大电力系统的基础上,提出了一种基于平方和方法的H_∞最优励磁控制设计方法。本文电力系统属于非多项式系统,而所提方法利用泰勒公式将非多项式系统等效转化为多项式系统,并保留高阶无穷小项。在给定扰动抑制率,以及利用平方和方法构造Lyapunov函数、控制器参数优化方面的优势前提下,可以将哈密顿-雅克比-伊萨克等式问题松弛为不等式约束表示的最优问题,最终结合策略迭代方法,实现了H_∞最优励磁控制器设计,提高了仿真的真实度。仿真结果表明所设计最优控制器可以有效改善系统性能,增强系统抗干扰能力。     

Aircraft Engine Gas Path Fault Diagnosis Based on Hybrid PSO-TWSVM

Twin support vector machine(TWSVM)is a new development of support vector machine(SVM)algorithm.It has the smaller computation scale and the stronger ability to cope with unbalanced problems.In this paper,TWSVM is introduced into aircraft engine gas path fault diagnosis.The generalization capacity of Gauss kernel function usually used in TWSVM is relatively weak.So a mixed kernel function is used to improve performance to ensure that the TWSVM algorithm can better balance a strong generalization ability and a good learning ability.Experimental results prove that the cross validation training accuracy of TWSVM using the mixed kernel function averagely increases 2%.Grid search is usually applied in parameter optimization of TWSVM,but it heavily depends on experience.Therefore,the hybrid particle swarm algorithm is introduced.It can intelligently and rapidly find the global optimum.Experiments prove that its training accuracy is better than that of the classical particle swarm algorithm by 5%.     

陶瓷吸波超材料结构光固化增材制造工艺研究

陶瓷超材料吸波器具有耐高温、高强度、可完美吸波的特点,其结构复杂且具有周期性,是一种新兴的吸波器件.但传统成形方式在复杂结构制造上存在一定的局限性.本文提出一种基于光固化增材制造氧化铝陶瓷表面镀铁氧体的方法实现周期性复杂结构的陶瓷超材料吸波器.使用氧化铝粉末和光敏树脂,配制出可供3D打印的氧化铝陶瓷浆料,利用3D打印机...     

航空发动机和燃气轮机热端部件热腐蚀-疲劳研究进展

航空发动机和燃气轮机在海洋环境下服役时,热端部件承受高温、高压、高转速机械载荷和高盐雾、高湿度等腐蚀环境耦合作用,常发生热腐蚀-疲劳失效,影响结构完整性、安全性和可靠性。本文针对航空发动机和燃气轮机热端部件热腐蚀-疲劳失效问题,总结和分析了涡轮盘、涡轮叶片高温合金及涂层热腐蚀机理,涡轮盘、涡轮叶片高温合金热腐蚀-疲劳失效机理以及热腐蚀-疲劳寿命预测模型和寿命评估方法,并对航空发动机和燃气轮机热端部件热腐蚀-疲劳试验研究和寿命评估方法的发展趋势进行了展望,以期促进燃气-海洋环境耦合作用下热端部件结构完整性评定方法的发展。     

MES将航空制造引向新水平

MES必须借助于信息技术才能够实现。可以按照MES理念建立独立的生产管理信息系统,也可以将MES理念融入到现有的ERP软件系统中,构成统一的更大范围集成的企业信息系统。但是,MES绝不仅仅是一种管理生产的"信息系统",MES是计划管理与控制系统在近十几年来的新突破,是企业更深刻地实现制造过程集成与信息集成的理想和远景的新阶段。     

PARAMETER ANALYSIS ON CIRCULATION CONTROLLED CIRCULAR CYLINDER FOR NOTARTM TAIL BOOM

Lift on circulation control （CC） circular cylinder is calculated via numerical simulations based on 2D real- izable k-e epsilon viscous model and compared with experimental data. The simulation result shows an acceptable agreement with tested data. With the proved grid and simulation method, series of simulations are conducted to study the effect of parameters on lift. Single slotted tail booms under different clown wash velocities are optimized with the principle of generating maximum total moment around the main rotor shaft with same total power con- sumption. The results show that larger jet flow velocity, or smaller blow angle, or larger diameter of the cross section can help generating larger lift while enhancing the attachment of both the jet flow and down wash flow. Multiple slotted tail boom is better because it increases lift with same total slot width, and can increase lift by in- creasing total slot width without causing separation, also it helps generating high steady lift at a big rank of slot at- tack angles. To mount a guide vane （GV） at the exit of the slot, or shape the upper slot wall like a smooth-GV, or design the slot with an edge fillet is not recommended because it reduces the velocity of both the jet flow and the upstream of the attached downwash flow. Compared with other shapes of the slots, arcs-profiled slot performs better because of larger jet flow velocity and smaller blow angle. In order to generate the largest moment with same total power consumed by the entire NOTARTM system, total width of the slots and slot attack angle should be optimized according to velocity of down wash flow.     

ACTIVE VIBRATION CONTROL OF TWO-BEAM STRUCTURES

The wave propagation approach is presented to research the active vibration control of two-beam structures.Considering the continuity of the generalized displacement and the equilibrium of the generalized force at the discontinuity,the wave reflection and transmission coefficients are calculated.Wave control is applied somewhere upstream or downstream to two-beam structures.Vibrations of two coupled beams per unit disturbance are investigated.The results show that wave control is efficient,and the influence of the thickness ratio of two-beam structures on control location is discussed.     

航空高强度碳纤维单向层合结构复合材料在切削过程中的各向异性行为研究

单向层合结构的高强度碳纤维增强树脂基复合材料已逐渐发展成为航空承力结构件的主要材料,相关的切削加工需求也越来越多。由于显著的各向异性,单向层合结构的碳纤维复合材料易在切削加工中形成缺陷,难切削加工性明显。采用直角自由切削试验的方法,得到了T700航空高强度碳纤维单向层合结构复合材料在不同纤维方向角下的切削力、切削比能、切削温度、切削加工表面。基于试验结果讨论了碳纤维单向层合材料在切削过程中力热行为的各向异性,得到了不同切削参数条件下的切削比能图谱以及碳纤维复合材料的切削热源和传导模型。通过扫描电子显微镜(Scanning electron microscope,SEM)分析了典型切削加工表面的特征,得到了不同纤维方向下的表面形成规律。     

镍基高温合金珩磨材料去除率研究

针对典型的镍基高温合金材料GH4169开展珩磨试验,研究了主轴转速、往复速度、每往复进给量、油石粒径对材料去除率的影响规律。结果表明:主轴转速对材料去除率影响较小,其余三因素均对材料去除率有显著影响,其中每往复进给量和油石粒径的影响最为显著,且材料去除率与三者均呈现正相关关系。进行多元线性回归拟合出经验公式。同时还发现,适当提高网纹交叉角可以提高珩磨材料去除率。对加工余量一定且粗糙度要较高的内孔珩磨进行了工艺优化,实现了更高的加工效率。