柔性扑翼气动结构耦合特性数值研究

微型扑翼体积小、重量轻,其柔性变形对气动特性有显著的影响。通过求解雷诺平均N-S方程(ReynoldsAveraged Navier-Stokes,RANS)和结构动力学方程,对微型柔性扑翼飞行器的气动结构耦合特性进行了数值模拟研究。针对微型扑翼的大幅运动,发展了适用于扑翼的气动结构耦合数值计算方法,研究了微型扑翼的气动结构耦合特性。通过求解雷诺平均Navier-Stokes(RANS)方程得到微型扑翼的非定常气动特性;利用哈密顿原理(Hamilton Principle)推导了扑翼的结构动力学方程,采用结构有限元方法对该动力学方程进行离散并求解,得到扑翼的动态结构特性;采用松耦合方法进行迭代。计算结果与风洞实验结果相比吻合良好,验证了所发展方法的有效性。在此基础上研究了惯性力和关键运动参数对柔性扑翼气动及结构特性的影响规律,有助于比较详细、全面地了解微型扑翼的气动机理,为柔性扑翼的设计提供了参考依据。     

Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.     

Dynamic analysis of C/C composite finger seal

A seal device as an important component of aeroengines has decisive influence on per- formance, reliability, and working life of aeroengines. With the development of aeroengines, demands on the performance characteristics of seal devices are made strictly. Finger seal as a novel kind of sealing device, recently attracts more and more attentions in academic circles and engineer- ing fields at home and abroad. Research on finger seals has been extensively developed, especially on leakage and wear performances under dynamic conditions. However, it is a pity that the work on finger seals has been limited with a single approach that is improving the performance by structural optimization; in addition, the technology of dynamic analysis on finger seals is weak. Aiming at the problems mentioned above, a distributed mass equivalent dynamic model of finger seals considering the coupling effect of overlaid laminates is established in the present paper, the dynamic perfor- mance of 2.5 dimension C/C composite finger seal is analyzed with the model, and then the effects of fiber bundle density and fiber bundle preparation direction on finger seal＇s dynamic performance are discussed, as well as compared with those of Co-based alloy finger seal. The current work is about dynamic analysis of finger seals and application of C/C composite in this paper may have much academic significance and many engineering values for improving research level of finger seal dynamics and exploring feasibility of C/C composite being used for finger seals.     

不同深宽比陷窝诱导涡结构分析

陷窝所诱导的旋涡强化动量或热的交换,使得陷窝在分离流动控制和强化对流传热研究中很受关注。深宽比是影响陷窝诱导涡结构的重要参数,开展了深宽比对陷窝诱导涡结构影响的研究。研究发现,深宽比为0.06时,涡结构为马蹄涡;深宽比为0.1至0.14时,涡结构为闭式分离泡;深宽比为0.16至0.20时,涡结构为对称类龙卷风涡;深宽比为0.22至0.30时,涡结构为非对称类龙卷风涡。通过涡核涡强度对比发现,过深的陷窝和过浅的陷窝其内涡强度均比中等深度陷窝弱。     

铰链对含铰结构非线性动力学特性影响分析

针对可展结构中铰链带来的展开后非线性动力学问题,建立了含铰结构的动力学模型。基于铰链侧向和径向的几何约束关系,分析了不同约束条件下的铰链非线性特性。基于谐波平衡法（HBM）,对含铰结构的非线性变量进行一次谐波展开,得到铰链非线性力的谐波展开表达式,将含铰可展结构的非线性动力学方程转化为代数方程。分析了铰链在不同非线性特性下各参数对结构动态特性的影响,得到结构固有频率随铰链间隙、刚度和激振力的变化规律。考虑铰链的非线性特性,通过固有频率脊线求解,得到结构固有频率极值随铰链数量、位置和刚度的变化曲面,并对其进行非线性拟合,得到铰链参数对结构固有频率的影响函数,其计算方法和结果在多维复杂结构中具有一定的扩展性,为可展结构的设计和研究提供参考。利用龙格库塔法对非线性结构进行数值仿真,得到结构的固有频率变化曲线,仿真结果表明了利用HBM进行含铰结构动力学分析的正确性。     

Coupling damage and reliability model of low-cycle fatigue and high energy impact based on the local stress–strain approach

Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain approach considering both low-cycle fatigue and high energy impact loads.Two coupling relationships between fatigue and impact are given with effects of an impact process on fatigue damage and effects of fatigue damage on impact performance. The analysis of the former modifies the fatigue parameters and the Manson–Coffin equation for fatigue life based on material theories. On the other hand, the latter proposes the coupling variables and the difference of fracture toughness caused by accumulative fatigue damage. To form an overall reliability model including both fatigue failure and impact failure, a competing risk model is developed. A case study of an actuator cylinder is given to validate this method.     

Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion

This paper presents the model of calculating the total friction moment of space gyroscope ball bearings which usually work under ultra-low oscillatory motion and are very sensitive to the friction moment. The aim is to know the proportion of the friction moment caused by each frictional source in the bearing＇s total friction moment, which is helpful to optimize the bearing design to deduce the friction moment. In the model, the cage dynamic equations considering six degree-of-freedom and the balls dynamic equations considering two degree-of-freedom were solved.The good trends with different loads between the measured friction moments and computational results prove that the model under constant rate was validated. The computational results show that when the speed was set at 5 r/min, the bearing＇s maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate. At the onset of each oscillatory motion, the proportion of the friction moment caused by cage in the bearing＇s total friction moment was very high, and it increased with the increasing speed. The analyses of different cage thicknesses and different clearances between cage pocket and ball show that smaller thickness and clearance were preferred.     

基于改进人工势场法的服务机器人路径规划

人工势场法是服务机器人路径规划算法中一种简单有效的方法.针对传统人工势场法存在的目标不可达问题,通过在原来的斥力函数中加入一个调节因子的方法解决,同时采用遍历搜索法解决局部极小值问题,并引入安全距离以及改进调节因子以提高机器人路径规划过程中的安全性能.最后,利用Matlab软件将改进后的人工势场法应用于服务机器人路径规划并进行了仿真实验.仿真结果表明,基于改进人工势场法的服务机器人路径规划有效地解决了机器人不能到达目标点的问题.     

航空发动机盘件径轴向裂纹底波监控超声检测方法研究

针对某航空发动机盘件中的径轴向裂纹,采用不同焦距的5MHz、10MHz聚焦探头和平探头,分别在0°,1°,2°,3°的声束入射角度下进行检测试验,通过对入射角度以及探头类型、频率、焦距等参数的优化,建立了径轴向裂纹的底波监控超声检测方法。研究发现:与垂直入射相比,小角度纵波斜入射底波监控超声检测方法可提高超声波对裂纹的敏感程度;使用焦距为89mm的10MHz聚焦探头,并使声束以2°入射角斜入射可得到最佳检测效果,试验结果与数值模拟具有良好的一致性。