军用飞机外场可靠性监控

军用飞机可靠性监控的目的在于对现役的军用飞机、机群的可靠性状况及飞机维修大纲的实施情况进行连续地监督与控制,以提高军机的系统效能,充分保证军机的战斗力。本文结合中国国情论述了军用飞机监控指标的选取、计算、控制界限的确定及具体实现。     

高效响应市场敏捷服务客户——沈阳机床持续为航空企业提供专业解决方案

机床行业的盛会CIMT2011开展在即,作为中国机床行业的领导企业之一,请问沈阳机床在此次展会上推出哪些面向航空工业的展品?展品的亮点和应用情况怎么样?     

Three-dimensional path planning for unmanned aerial vehicle based on interfered fluid dynamical system

This paper proposes a method for planning the three-dimensional path for low-flying unmanned aerial vehicle(UAV) in complex terrain based on interfered fluid dynamical system(IFDS) and the theory of obstacle avoidance by the flowing stream. With no requirement of solutions to fluid equations under complex boundary conditions, the proposed method is suitable for situations with complex terrain and different shapes of obstacles. Firstly, by transforming the mountains, radar and anti-aircraft fire in complex terrain into cylindrical, conical, spherical, parallelepiped obstacles and their combinations, the 3D low-flying path planning problem is turned into solving streamlines for obstacle avoidance by fluid flow. Secondly, on the basis of a unified mathematical expression of typical obstacle shapes including sphere, cylinder, cone and parallelepiped, the modulation matrix for interfered fluid dynamical system is constructed and 3D streamlines around a single obstacle are obtained. Solutions to streamlines with multiple obstacles are then derived using weighted average of the velocity field. Thirdly, extra control force method and virtual obstacle method are proposed to deal with the stagnation point and the case of obstacles’ overlapping respectively. Finally, taking path length and flight height as sub-goals, genetic algorithm(GA) is used to obtain optimal 3D path under the maneuverability constraints of the UAV. Simulation results show that the environmental modeling is simple and the path is smooth and suitable for UAV. Theoretical proof is also presented to show that the proposed method has no effect on the characteristics of fluid avoiding obstacles.     

基于神经网络的翼盒结构响应重构方法应用

翼盒结构复杂，航行中承载条件恶劣，利用有限测点信息重构其它位置响应对于实时健康监测具有很强的现实意义。通过误差反向传播神经网络训练得到响应之间的非线性关系，建立基于神经网络的响应重构方法，开展有限元分析对其进行数值仿真验证，并将该方法应用于实测随机激励环境下翼盒典型承力结构的响应重构及损伤定位与判断分析。结果表明：采用该方法重构出的预测响应功率谱密度的均方根相对误差不超过1.90 dB，主要频点误差小于10%；判断出翼盒关键测点e 的损伤或故障发生在所截取片段数据3 s 后，其故障特征频率为240 Hz 左右，该方法应用于响应重构预示及健康监测分析具有可行性。     

Novel DSC-IPM for Compact Converters at Elevated Temperatures

A novel two-side cooling for integrated power modules (IPMs) for improved compactness and capability for elevated temperature operations is presented. This approach applies and improves off-the-shelf products of IPM without significantly changing original packaging and fabrication process. It can reduce a device's p-n junction-temperature rise by 20% at an equivalent load, thus increasing operating ambient temperatures, which is desirable for aircraft applications. The size and volume associated with a conventional cooling mechanism can be reduced, achieving improved compactness and power density.     

Incremental maneuver estimation model for target tracking

An incremental model for maneuver detection and estimation for use in target tracking with the Kalman filter is described. The approach is similar to the multiple Kalman filter bank, but with a memory for the maneuver status for the track under consideration. The advantage of this approach is that the target acceleration can be more accurately estimated. The maneuver-detection model has shown good maneuver-following capability. Moreover, it needs only a finite number of Kalman filters to handle all possible maneuver values and it responds quickly as maneuver occurs. When there is an abrupt maneuver change the model can still track the targets in short time     

Recent developments of electric vehicles and their propulsionsystems

Major recent electric vehicle (EV) programs in North America, Europe, and Japan are reviewed. The developments discussed include electric vehicles for fleet operation and electric passenger cars for urban transit. All major auto makers have had their own concept electric vehicle programs, targeted at commercial production in the late 1990s. It Is noted that, with different objectives for various electric vehicles, considerations such as cost, reliability, efficiency, maintenance, durability, weight, size, and noise level should be compromised for the propulsion system design. Consequently, DC motor drives, induction motor drives, and permanent magnet brushless DC motor drives will continually be used for EV propulsion systems in the future, with DC drives being gradually replaced by AC drives. The rapid advances in power semiconductor devices and microprocessors have made it possible to build reliable and cost-effective AC drive systems     

On optimal track-to-track fusion

Track-to-track fusion is an important part in multisensor fusion. Much research has been done in this area. Chong et al. (1979, 1986, 1990) among others, presented an optimal fusion formula under an arbitrary communication pattern. This formula is optimal when the underlying systems are deterministic, i.e., the process noise is zero, or when full-rate communication (two sensors exchange information each time they receive new measurements) is employed. However, in practice, the process noise is not negligible due to target maneuvering and sensors typically communicate infrequently to save communication bandwidth. In such situations, the measurements from two sensors are not conditionally (given the previous target state) independent due to the common process noise from the underlying system, and the fusion formula becomes an approximate one. This dependence phenomena was also observed by Bar-Shalom (1981) where a formula was derived to compute the cross-covariance of two track estimates obtained by different sensors. Based on this results a fusion formula was subsequently derived (1986) to combine the local estimates which took into account the dependency between the two estimates. Unfortunately, the Bayesian derivation made an assumption that is not met. This work points out the implicit approximation made and shows that the result turns out to be optimal only in the ML (maximum likelihood) sense. A performance evaluation technique is then proposed to study the performance of various track-to-track fusion techniques. The results provide performance bounds of different techniques under various operating conditions which can be used in designing a fusion system.     

民用飞机情景识别系统试飞研究

由于平视显示器(HUD)、视景增强系统(EVS)以及合成视景系统(SVS)优秀的情景显示能力,HUD与EVS、SVS结合使用将显著提高飞行机组情景识别以及态势感知能力。同时,HUD与自动着陆系统结合使用可降低着陆和起飞时的最低天气标准。随着机组情景识别能力的提高,必须提出高效的试飞方法来验证情景识别系统的适航符合性,在分析EVS、SVS与HUD结合使用的基础上,提出综合的优化的民用飞机机组情景识别系统试飞方法以及基于任务的符合性判据。