基于Python复合材料多加筋整体构件ABAQUS前处理二次开发

采用ABAQUS脚本语言Python开发了复合材料多加筋整体构件程序.讨论ABAQUS对象模型、Python语言接口以及详细的ABAQUS前处理开发过程中各种主要对象模型的调用方法.ABAQUS前处理二次开发可以节省大量建模时间,提高建模效率.论文的工作为类似复合材料结构有限元前处理建模提供了有价值的参考.     

民用飞机技术出版物验证方法探讨

技术出版物作为民用飞机产品的重要组成部分,用于指导运营人正确地操作和维护飞机。分析民用飞机技术出版物文件(手册)内容的自身特点,归纳民用飞机技术出版物的验证要求,提出民用飞机技术出版物的验证方法,确立技术出版物文件验证方法选用的一般原则,构建民用飞机技术出版物验证的管理体系。     

大学生吸烟状况及态度调查与对策研究

为落实教育部《关于在全国各级各类学校禁烟有关事项的通知》(教基一函[2014]1号)文件要求,本研究对北华航天工业学院399名大学生实施了吸烟状况及态度调查,掌握了大学生的真实吸烟状况,尝试提出了以下建议:(1)充分凝练集体智慧,征集控烟办法。(2)会同学校有关部门,论证设立吸烟区的可行性。(3)落实宿舍禁烟管理制度,加大宿舍吸烟的惩处力度。(4)提升学生压力管理与情绪疏导能力。为学校有关部门制定切实有效的控烟措施,杜绝宿舍吸烟引发的火灾隐患提供了借鉴。     

大失准角下MIMU空中快速对准技术

 为了提高微小型无人机空中的反应速度和作业精度,提出将基于模型误差预测的扩展卡尔曼滤波(MEP-EKF)方法应用在大失准角下微惯性测量单元(MIMU)的空中对准中,通过不同机动飞行策略的仿真结果,证实MEP-EKF算法不仅能够实时估计出系统的模型误差,而且将其与扩展卡尔曼滤波(EKF)和Unscented卡尔曼滤波(UKF)方法进行了仿真比较,结果表明MEP-EKF算法在方位误差角的估计上,取得了比EKF和UKF精度高的仿真结果,使得方位失准角由30°快速下降到1°左右,而且MEP-EKF所需时间仅是UKF的17%。     

Comparison of BBfs Observed by Single and Multi Satellites

This paper, using the data of three Cluster satellites, compares the observations of Bursty Bulk Flow (BBF) by single satellite with those by multi satellites. The results indicate that there exists remarkable difference between observations of BBF by single satellite and multi satellites. The observations of BBF by a single satellite depend on its position relative to the flow channel. The difference is caused by the localization characteristics of fast flows in the plasma sheet, and can lead to diverging views about substorm and causal relations among substorm phenomena.      

星载SAR弹射式干扰功率影响因素分析

弹射式干扰功率是对星载SAR实施干扰的前提。从信号角度推导弹射式干扰的干扰方程,分析弹射式干扰功率的影响因素,详细讨论了干扰机等效辐射功率与SAR高度、干扰机高度和干扰信号入射角之间的关系。仿真验证了理论分析的正确性。     

垂直下降状态下的旋翼三维流场数值模拟

应用激励盘模型,采用计算流体力学(CFD, Computational Fluid Dynamics)方法结合动量叶素理论,计算了旋翼在垂直下降时的流场特征与气动性能.计算过程中,旋翼载荷被描绘成沿桨盘径向分布、与当地流动参数相关的压力源项.在直角坐标系中,运用有限体积方法直接求解了定常不可压N-S(Navier-Stokes)方程,湍流模型为S-A(Spalart-Allmaras)一方程模型,重点使用诱导速度经验公式计算出了压力源项.旋翼流场模拟结果和性能预计结果同实验测量数据吻合较好,表明这种CFD方法可以有效地分析旋翼下降飞行时的空气流动特性,为进一步的涡环状态研究提供了参考.     

细缝裁减和非均匀映射结合的图像自适应方法

采用将细缝裁减和非均匀映射相结合的图像尺寸自适应框架,提出了一种基于内容的图像重要信息变形的度量方法.首先提取原始图像的重要性像素点,利用细缝裁减去掉一条像素细缝后,相应的重要性像素点会被更新.对于图像中保留的重要性像素点,计算它们的子图像平均偏差(ADSI,Average Difference of Sub Images);对于被移除的重要性像素点,计算它们的平均丢失能量(ALE,Average Lost Energy).通过ADSI和ALE可计算出重要信息变形的度量函数(IIDF,Important Information Deformation Function)的值,通过分析IIDF的趋势得到细缝裁减的终止条件,然后改用非均匀映射方法(non-homogeneous warping)将图像自适应到目标尺寸.实验结果证明,新方法处理的结果图像重要区域变形较小,并且计算效率比较高.     

倒置梯形涡流发生器与非对称超声速来流相互作用的短隔离段流动数值研究

为了有效地缩短超燃冲压发动机隔离段长度,在前期研究的等宽度平直斜楔基础上,用数值模拟的方法,研究了一种侧壁面后掠的倒置梯形涡流发生器,涡流发生器放置在隔离段进口厚附面层一侧。研究结果表明:加装倒置梯形涡流发生器后可在进出口压比相同的情况下,将隔离段长度减小40%左右,比等宽度平直斜楔多缩短5%;激波串长度随后掠角呈非线性变化,在一适当的后掠角下,激波串长度最小,它的总压恢复系数与等宽度平直斜楔处于同等水平。     

MHD Flow Control of Oblique Shock Waves Around Ramps in Low-temperature Supersonic Flows

This article is devoted to experimental study on the control of the oblique shock wave around the ramp in a low-temperature supersonic flow by means of the magnetohydrodynamic(MHD) flow control technique. The purpose of the experiments is to take advantage of MHD interaction to weaken the oblique shock wave strength by changing the boundary flow characteristics around the ramp. Plasma columns are generated by pulsed direct current(DC) discharge, the magnetic fields are generated by Nd-Fe-B rare-earth permanent magnets and the oblique shock waves in supersonic flow are generated by the ramp. The Lorentz body force effect of MHD interaction on the plasma-induced airflow velocity is verified through particle image velocimetry(PIV) measurements. The experimental results from the supersonic wind tunnel indicate that the MHD flow control can drastically change the flow characteristics of the airflow around the ramp and decrease the ratio of the Pitot pressure after shock wave to that before it by up to 19. 66%, which leads to the decline in oblique shock wave strength. The oblique shock waves in front of the ramp move upstream by the action of the Lorentz body force. The discharge characteristics are analyzed and the MHD interaction time and consumed energy are determined with the help of the pulsed DC discharge images. The interaction parameter corresponding to the boundary layer velocity can reach 1. 3 from the momentum conservation equation. The velocity of the plasma column in the magnetic field is much faster than that in the absence of magnetic field force. The plasma can strike the neutral gas molecules to transfer momentum and accelerate the flow around the ramp.