发动机缸体水套热芯盒模具在生产中存在的问题及解决方案

以发动机缸体水套为例着重论述了热芯盒模具在使用中存在的问题,并针对这些问题提出了解决方案,为以后的设计积累经验。     

飞机钣金零件弯边自动展开系统

由于飞机钣金件的复杂性,普通钣金展开软件不适合该类弯边零件的展开.本文分析了飞机钣金零件独有的特征,研究开发了基于CATIA环境下的飞机钣金零件的弯边自动展开系统,提出了一套特有的法向截面展开方法和下陷处理方法,并以实例说明零件的展开过程.     

二进制乘法器的面—时平方复杂性研究

讨论了n位二进制整数乘法下界面－时平方复杂性问题，给出了一种树型布局的乘法器网络模型，并分析了它的AT~2复杂性     

浅析地理信息系统模型的建立与技术

本文建造了一个地理信息系统的模型，并讨论了地理信息系统设计中的一些关键技术。     

自调节模拟低通滤波器的研究

通过对有源低通滤波器，频率／电压转换器AD650及其变容二极管的特性分析，提出由信号频率来自调节有源低通滤波器截止频率的新设计方案，并对其可行性进行了分析和研究。     

Chang’E-1 precision orbit determination and lunar gravity field solution

In this paper we present results assessing the role of Very Long Baseline Interferometry (VLBI) tracking data through precision orbit determination (POD) during the check-out phase for Chang’E-1, and the lunar gravity field solution CEGM-01 based on the orbital tracking data acquired during the nominal phase of the mission. The POD of Chang’E-1 is performed using S-band two-way Range and Range Rate (R&RR) data, together with VLBI delay and delay rate observations. The role of the VLBI data in the POD of Chang’E-1 is analyzed, and the resulting orbital accuracies are estimated for different solution strategies. The final orbital accuracies proved that the VLBI tracking data can improve the Chang’E-1 POD significantly. Consequently, CEGM-01 based on six-month tracking data during Chang’E-1 nominal mission phase is presented, and the accuracy of the model is assessed by means of the gravity field power spectrum, admittance and coherence between gravity and topography, lunar surface gravity anomaly and POD for both Chang’E-1 and Lunar Prospector (LP). Our analysis indicates that CEGM-01 has significant improvements over a prior model (i.e. GLGM-2), and shows the potential of Chang’E-1 tracking data in high resolution lunar gravity field model solution by combining with SELENE and LP tracking data.     

Identifying vital edges in Chinese air route network via memetic algorithm

Due to rapid development in the past decade, air transportation system has attracted considerable research attention from diverse communities. While most of the previous studies focused on airline networks, here we systematically explore the robustness of the Chinese air route network, and identify the vital edges which form the backbone of Chinese air transportation system. Specifically, we employ a memetic algorithm to minimize the network robustness after removing certain edges, and hence the solution of this model is the set of vital edges. Counterintuitively, our results show that the most vital edges are not necessarily the edges of the highest topological importance, for which we provide an extensive explanation from the microscope view. Our findings also offer new insights to understanding and optimizing other real-world network systems.     

氮化硼陶瓷前驱体的制备及表征

以三氯化硼和六甲基二硅氮烷为原料制备了聚硼氮烷预聚体,再经高分子化制备了可溶的氮化硼陶瓷前驱体—聚硼氮烷.该法合成工艺简单,反应温和.采用凝胶渗透色谱、核磁共振氢谱、傅里叶红外光谱、热失重分析仪、元素分析等对预聚体高分子化过程中的分子量变化、高分子化机理、聚硼氮烷的裂解过程、所得陶瓷的元素组成进行了研究.结果表明,高分子化过程中主要发生了六甲基二硅氮烷脱除和转氨基反应.所得聚硼氮烷重均分子量为7 582,氮气下1 000℃时的陶瓷产率为41.6 wt％,陶瓷化转变主要发生在400～600℃,800℃时陶瓷化转变基本进行完毕,800℃氨气下裂解得到低C含量的白色氮化硼陶瓷,进一步在1 500℃氩气中裂解可得到结晶度较高的氮化硼陶瓷.     

民用飞机蓄电池系统设计分析研究

首先介绍民用飞机蓄电池系统的组成及民用飞机蓄电池的类型;其次,介绍了适航条款对民用飞机蓄电池系统设计的要求,并且将适航条款对民用飞机蓄电池系统设计要求进行分类研究;最后,针对适航条款对民用飞机蓄电池系统设计的要求进行详细说明,表明其对适航条款的符合性。