化学气相反应法在C/C复合材料抗氧化处理中的应用

通过把硅蒸气渗入预制体孔隙与碳直接反应生成SiC的化学气相反应(CVR)方法,提高初始密度和预制体结构均不同的C／C复合材料的抗氧化能力,研究了C／C复合材料的密度变化与微观结构,并对其进行了氧化试验。结果表明,因CVR温度、C／C复合材料初始密度不同,抗氧化处理后的密度增加量有显著不同。针刺炭布C／C／SiC复合材料在马福炉中于1160℃经65min氧化后,其失重率仅2．6％,而密度为1．95g／cm^3的同结构C／C复合材料相在同条件下失重率高达32％。     

小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

中国空间大功率微波部件微放电抑制表面处理技术最新进展

材料表面的二次电子发射会触发和维持空间高功率射频器件的共振雪崩放电现象,这种现象又被称为微放电效应。微放电效应是限制空间大功率微波部件应用的关键问题之一。从微放电作用的机理出发,首先介绍了两种微放电类型（单表面与双表面）的基本物理机理;然后总结了当前主流的微放电抑制方法并给出各自应用于空间大功率微波部件时的限制。针对空间大功率微波部件微放电抑制的特殊问题,综述了国内近5年来在表面处理法抑制微放电领域的研究成果并预测了微放电抑制技术的发展趋势。     

地球同步轨道星地量子信道特性研究

为了研究地球同步轨道量子密钥分发过程中星地量子信道特性，项目团队研制了搭载于实践二十卫星的极弱光偏振态分发设备，开展了地球同步轨道卫星与地面间光子偏振态的传输实验。实验时，星载偏振光分发设备根据遥控指令以50MHz频率驱动四个激光器出光，分发|0〉、|π/2〉、|π/4〉和|3π/4〉四种偏振态光子，经过长距离的空间传输后由地面站望远镜接收，最后由超导探测器探测。研究结果表明，地球同步轨道卫星到地面站的光学链路衰减约为100~110 dB，通道误码率约为2%~8%，满足量子密钥分发误码率的安全性要求。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

液液同轴离心式喷嘴喷雾过程研究进展

内部流动主要研究了流量系数、液膜厚度和气核半径,分析了内部流场,少量研究涉及内外喷嘴液膜互击、液膜表面波振幅和频率等方面。液液喷嘴外部液膜流动及喷雾特性的研究开展较多,观测了不同工况、结构参数下内外液膜流动形态,少数学者使用理论方法分析了液膜破碎机理。对喷雾特性的研究主要是获得了喷雾锥角、破碎长度、液膜振荡频率等的变化规律,并进一步研究了SMD、液滴速度、混合特性等的变化规律。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

基于TLE的弹道系数计算方法及应用分析

针对仅使用两行要素（Two Line Element，TLE）作为数据源的应用需求，研究了基于TLE轨道衰减的弹道系数计算方法。介绍了一种常用的基于两组TLE的直接计算法，分析TLE选取间隔对结果精度的影响；提出了一种基于多组TLE的迭代计算方法，以降低异常TLE对计算结果的影响；从弹道系数计算效果、在再入预报中的应用等方面对这两种方法进行比较分析。结果表明，两种方法各有优劣，基于多组TLE的迭代计算法稳定性更高、受TLE精度的影响更小；由于数据区间更短，基于两组TLE的计算结果对短期轨道衰减特性反应得更准确，用于临近再入时的预报效果更好。     

Simulation analysis for effects of bone loss on acceleration tolerance of human lumbar vertebra

The purpose of the present study was to analyze and predict the changes in acceleration tolerance of human vertebra as a result of bone loss caused by long-term space flight. A human L3–L4 vertebra FEM model was constructed, in which the cancellous bone was separated, and surrounding ligaments were also taken into account. The simulation results demonstrated that bone loss has more of an effect on the acceleration tolerance in x-direction. The results serve to aid in the creation of new acceleration tolerance standards, ensuring astronauts return home safely after long-term space flight. This study shows that more attention should be focused on the bone degradation of crew members and to create new protective designs for space capsules in the future.