基于VXI总线的检测软件设计

基于VXI总线和虚拟仪器技术，研制开发了用于外场的模拟式电子控制器检测软件，并对软件开发的过程和要求进行了分析，重点解决了程序设计中的需求分析和模块化设计问题。     

基于线性神经网络的滑油金属含量预测

利用神经网络方法对某型航空发动机滑油监控系统中需重点监控的金属元素含量建立了网络，并根据该模型对其含量变化趋势进行了预测分析。某部队通过对不同实测数据的检验证明，可根据该模型的预测结果预报金属含量是否超标。     

燃烧条件下药柱脱粘扩展的设计

利用有限元方法分析了不同条件下药柱脱粘部位的应力状况,设计了复合固体推进剂燃烧条件下的脱粘扩展试件,通过X射线实时成像系统纪录了燃烧过程。结果表明:要形成脱粘扩展,脱粘部位装药要有大的拉伸变形;当药柱在点火冲击作用下,脱粘产生比较大的拉伸变形,且变形达到脱粘扩展的临界变形量时,就会出现脱粘扩展。     

用指标体系方法综合评价机场技术进步状况

根据机场的技术特点，构建了适合机场的技术进步综合评价指标体系，并运用系统分析方法，确定了各指标的合理权重和评分区间，最后利用现有数据对国内机机场进行了技术进步状况的比较排序，并对排序结果进行了分析。     

高能CO2激光腔镜高反介质薄膜的传输特性

为了获得适用于高能CO2激光器的高抗破坏阈值高反薄膜,以10.6μm高反膜ZnSe/YbF3,PbTe/BaF2膜系为例,数值模拟了激光在高反介质膜中的传输的场特性;给出了激光在多层介质膜中的场强分布、温度场分布及热应力分布。结果表明硅镜基体上的PbTe/BaF2膜系所需膜层厚度小、膜层数少,反射率可高达99.98%。     

基于改进A^*算法的无人机快速轨迹规划方法

针对旋翼无人机在三维障碍物环境中自主飞行时路径搜索速度慢、轨迹生成通常忽略无人机动力学特性的问题,发展一种基于改进A^*算法并同时考虑无人机动力学特性和运动学性能的快速轨迹规划方法。首先,在三维障碍物环境中运用改进A^*算法通过剔除部分网格节点降低A^*算法的节点计算量,提升算法的路径搜索速度;其次,以最小化飞行轨迹的四阶导数作为目标函数,以路径点处的位置、速度、加速度等各阶导数作为约束条件优化飞行轨迹;最后,在三维障碍物环境中对比A^*算法改进前后的路径搜索结果,并对优化的飞行轨迹进行仿真飞行测试。结果表明:改进A^*算法大幅降低了A^*算法的节点计算量,显著提升了路径搜索速度;且无人机能够始终以较小位置误差沿优化轨迹光滑连续飞行。     

危害性分析中的模糊数学方法

利用模糊集合理论对影响故障模式危害性的各因素进行了模糊化处理，建立了故障模式危害性评定的模糊评判模型，并阐述了模糊评判方法的基本步骤。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

平台摇摆对卡尔曼滤波跟踪精度的影响

通过建立目标相对运动坐标系和目标相对运动观测模型,研究了在平台摇摆影响下,跟踪系统观测到的目标运动状态的变化。在分析捷联垂直基准补偿原理的基础上建立了捷联垂直基准平台摇摆角补偿模型,建立的模型结合捷联垂直基准系统的测量能力对其补偿算法进行了理论推导,使模型适用于实际捷联垂直基准系统。通过建立模型以及仿真研究了平台摇摆作用下卡尔曼滤波跟踪精度的变化,指出了摆造成卡尔曼滤波跟踪精度降低甚至离散的主要原因在于模型误差增大。设计仿真实验验证了结论的正确性,为进一步改进跟踪手段提供了理论参考。     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.