Single-phase power distribution system power flow and faultanalysis

Alternative methods for power flow and fault analysis of single-phase distribution systems are presented. The algorithms for both power flow and fault analysis utilize a generalized approach to network modeling. The generalized admittance matrix, formed using elements of linear graph theory, is an accurate network model for all possible single-phase network configurations. Unlike the standard nodal admittance matrix formulation algorithms, the generalized approach uses generalized component models for the transmission line and transformer. The standard assumption of a common node voltage reference point is not required to construct the generalized admittance matrix. Therefore, truly accurate simulation results can be obtained for networks that cannot be modeled using traditional techniques     

The Martian stratigraphy — Short review and perspectives

The main aspects of the Martian stratigraphy have been determined from the detailed study of Mariner 9 and Viking Orbiter images. Three major stratigraphic systems, the Noachian System, the Hesperian System, and the Amazonian System, are inferred from these studies. The global geological evolution of Mars is essentially derived from its stratigraphy. It reveals that tectonism and volcanism were widespread during two major periods (Noachian and Lower Hesperian) and became more localized during the Upper Hesperian and Amazonian periods. The transition between these two major periods occurred about 2 Ga ago, and significant geologic activity could still be present. However, a number of geologic features and processes remain little understood. Future investigations, including complete high resolution imaging and detailed mapping, geochemical mapping, in situ chemical analyses, etc., will be necessary in order to improve our knowledge of the Martian stratigraphy and geologic evolution and are essential to prepare any future Mars Sample Return mission and the Human Exploration of this planet.     

Cross-correlation properties of algebraically constructed Costasarrays

The problem of determining the cross-correlation properties of signals based on algebraically constructed Costas arrays is addressed by examining the discrete cross-correlation of the algebraically constructed Costas arrays for a given construction and dimension. Finding two arrays that minimally correlate implies that the signals based on these arrays also minimally correlate. The properties of finite fields are reviewed, and the major algebraic constructions for Costas arrays are presented, i.e. the Welch construction and the Golomb construction. The discrete cross-correlation properties of the Costas arrays are derived for arrays of the same dimension derived from the same construction. The use of Costas arrays in the signal design problem is discussed, and examples are given to show the cross-correlation of the signals based on the algebraically constructed arrays     

A Fast Beamforming Algorithm for Large Arrays

This beamforming algorithm is written specifically for array radars in which the number of array elements K is very large compared with the number of jammers L the radar is designed to suppress. It uses a set of M noise vectors to construct a basis for the jammer component of the antenna output vectors. The component of the quiescent weight vector orthogonal to each basis vector is calculated, renormalized to unit length, and identified as the adapted weight vector. This algorithm is effective in the suppression of many types of jammers. The number of noise samples M required in the construction of the adapted weight vector is approximately equal to L. In the special case of L narrowband noise jammers, for example, a choice of M = L usually reduces the receiver output jammer power to a few dBs above the white noise background. It is permissible to have M相似文献   

GTD Terrain Reflection Model Applied to ILS Glide Scope

The capability of calculating the reflection of electromagnetic signals from uneven terrain has many applications. One of these is the determination of instrument landing system (ILS) glide slope performance. For this application the wavelength is approximately 1 m, incidence angles are usually near grazing, and the fields are horizontally polarized, so that gross irregularities such as dropoffs and hills are more important than surface roughness. Past approaches used to calculate the ground reflections for this application have been three-dimensional physical optics models which were very cumbersome and time consuming and which neglected important diffraction and shadowing phenomenon; a two-dimensional physical optics model which was faster than the three-dimensional models but ignored many shadowing and transverse terrain variation effects; and a half-plane diffraction model which is applicable only to a specified type of terrain geometry. In this paper a terrain reflection model based on the geometrical theory of diffraction (GTD) is described which can accommodate any piecewise linear terrain profile, requires less computer time than the physical optics models, is capable of including transverse terrain effects, and determines the reflected fields with all important diffraction and blockage effects included.     

An Adaptive Array Signal Processing Algorithm for Communications

An algorithm is described for initial synchronization in a communication system with a digital adaptive array. This algorithm can also be used for message extraction. A set of consecutive complex video samples of the array output is processed to obtain optimum adaptive array weights, based on a least mean square (LMS) error criterion. This computation is performed for each of the possible alternative signals which may be present during an observation interval. The correct synchronization time or message symbol is selected as the one which yields the minimum LMS error. Assuming orthogonality of the alternative codes, a probability distribution for the output of this processor has been derived.     

Tracking Accuracies with Position and Rate Measurements

Tracking accuracies for the radial component of motion are computed for a track-while-scan radar system which obtains position and rate data during the dwell time on a target These results will be of interest to persons developing trackers for pulse Doppler surveillance radars. The normalized accuracies, computed for a two state Kalman tracking filter with white noise maneuver capability, are shown to depend upon two parameters, r = 4?0/?aT2 and s = ?dT/?0. The symbols ?0 and ?d are the position and rate measurement accuracies, respectively, ?a is the standard deviation of the white noise maneuver process and T is the antenna scan time. The scalar tracking filter equations are derived and numerical results are presented. Lower steady state tracking errors plus the earlier attainment of steady state accuracies are the direct consequence of incorporating the rate measurements into the tracking filter.     

Some crucial X-ray observations — One or two SNR(s) in Crux?

A new EXOSAT (LE/CMA) observation of the region in Crux (R.A. 11h 45m, Dec. -62°) where Markert et al. (1981) reported the existence of two x-ray SNR's is presented. After cleaning the CMA field from the point source component, due to the UV emission of the numerous stars in the field, the smoothed x-ray contours are compared to the 408 MHz radio map of Caswell et al. (1983). The existence of two, well-separate x-ray emission regions is confirmed by EXOSAT, and the current x-ray/radio picture is not sufficent to distinguish clearly between the assumption of one or two (possibly interacting) SNR's in the region.     

Extensions of the Discrete-Average Models for Converter Power Stages

An improved power converter model is developed by combining the average and discrete modeling techniques. The parameter determination of the proposed discrete-average model is shown to be dependent on the type of duty cycle control law and the nature of the error processor used in the feedback loop. Furthermore, the paper pinpoints deficiencies of the conventional loop gain measurement technique which is widely used in industries.