动态桨叶RCS特性的实验研究

在微波暗室中测量了金属平板桨叶动态模型的高频雷达散射截面RCS(Radar Cross Section),并通过快速傅立叶变换FFT(Fast Fourier Transform)得到相应的频谱图;详细分析了时域和频域RCS随桨叶片数、雷达波入射方向、入射频率、极化状态和桨叶转速等因素的变化.实验结果表明主要特征是时域RCS呈周期性起伏,频谱图因前行桨叶与后行桨叶散射有差别而不对称,且频谱宽度反映了多普勒效应.取得的结果与已有文献的计算分析一致,对直升机的探测和识别具有重要的参考价值.      

小卫星的自适应姿态控制

分析了小卫星的姿态动力学及运动学方程；利用姿态动力学方程为一动力学参数矢量的线性函数这一事实，考虑存在参数不确定性，提出了一种自适应控制方法；证明了这种方法可以保证控制系统全局渐近稳定。仿真结果验证了该方法的有效性。     

捷联式天线平台的稳定性研究

将Rudin提出的红外成像捷联稳定模型用于天线平台的稳定,并应用不变性原理,采取匹配滤波方法,提高了稳定平台的解耦精度.具体仿真结果表明:在0.5 Hz~1.0 Hz频段解耦精度提高了35 dB.同时,在考虑传感器测量噪声的情况下,对天线平台的稳定误差进行了仿真分析,结果显示,传感器测量噪声对稳定误差有较大的影响,但通过滤波稳定误差可减小50%左右.      

图像法求液滴表面张力和接触角

空间流体实验具有无人操作的特殊性,需要对监控图像进行实时处理,得到目标参数.本文研究了利用照相机捕捉到的液滴灰度图像,分析求取液滴的表面张力、接触角、体积等物理参数的方法.针对液滴的灰度图像,利用边界提取、域值分割等图像处理方法,得到液滴的基本轮廓.建立基于液面像素点坐标的拉普拉斯方程,运用牛顿一拉夫逊法、龙格-库塔法、坐标轮换法等多种数值方法,对液滴的边界进行拟合,寻求最优的轮廓拟合点.根据最优的拟合点,确定液滴的物理参数.提出了利用牛顿法与一维寻优相结合的算法进行轮廓拟合的方法,并与文献[1]提出的算法进行了比较,证明了该方法具有收敛速度较快,拟合精度较高的特点.该方法是实现空间蒸发液滴热毛细对流和接触角测量实验的一项关键技术,同时也可以运用到非接触测量的实验场合.      

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

Relative amplitude of the total electron content variations depending on geomagnetic activity

We developed a method of estimation of a relative amplitude dI/I of the total electron content (TEC) variations in the ionosphere as deduced from the data of the global GPS receivers network. To obtain statistically significant results we picked out three latitudinal belts provided in the Internet by the maximum number of GPS sites. They are high-latitudinal belt (50–80°N, 200–300°E; 59 sites), mid latitude belt (20–50°N, 200–300°E; 817 sites), and equatorial belt (±20°N, 0–360°E; 76 sites). The results of the analysis of the diurnal and latitudinal dependencies of dI/I and dI/I distribution probability for 52 days with different levels of geomagnetic activity are presented. It was found that on average the relative amplitude of the TEC variations varies within the range 0–10% proportionally to the value of the K_p geomagnetic index. In quiet conditions the relative amplitude dI/I of the TEC variations at night significantly exceeds the daytime relative amplitude. At high levels of magnetic field disturbances, the geomagnetic control of the amplitude of TEC variations at high and middle latitudes is much more significant than the regular diurnal variations. At the equatorial belt, on average, the amplitude of TEC variations in quiet and disturbed periods almost does not differ. The obtained results may be useful for development of the theory of ionospheric irregularities.     

RCS分析中多次反射的计算及程序实现技术

介绍目标RCS分析计算中多次散射的计算方法,计算多次散射时主要考虑面元-面元之间的相互作用,计算过程采用几何光学法(GO)、物理光学法(PO),在总后向RCS计算中还运用了等效电磁流法.同时,文中讨论计算多次散射的程序实现技术.最后,给出计算例子,考虑多次散射时总的后向RCS计算结果与前人发表的实验结果相吻合.      

两种层板性能对比

针对常规的141型层板,提出了一种增加50％数量扰流柱的设计,即161型层板.采用实验和数值模拟相结合的办法研究了两种类型层板在流阻和换热方面的差别.换热实验部分采用了辐射式加热设备,测量了层板上下表面平均壁温,以及冷气进、出口截面间的焓差,得到了相应进气雷诺数下的层板体积换热努塞尔数.发现161模型流阻降低20％,换热增强5％.对一些实验工况,采用三维计算流体力学程序进行了流-固耦合传热数值模拟,所得结果在趋势上与实验一致,在数值上,流阻和换热与实验结果分别相差5％和30％.利用数值模拟结果分析并比较了两种模型在流场和表面对流换热系数分布方面的细节差别.      

基于SVM的浮动车行驶模式判断模型

浮动车在低速情况下存在两种行驶模式,如不能对上述模式进行准确区分,将严重影响浮动车实时路况计算的精度和效率.研究和设计了一个基于支持向量机(SVM,Support Vector Machine)的浮动车行驶模式判断模型,并针对性地提出了一种简单的基于隶属度矩阵的特征评价和选择方法.实验表明通过上述方法选择的特征子集所训练的分类器在测试样本集上具有92.6%的分类准确性;经过行驶模式分析后,浮动车系统的准确性有显著提升.