用最佳旋转轴方法形成误差信号的飞行器姿态控制系统

本文重点讨论采用所谓最佳旋转轴方法来形成飞行器纵轴指向控制的误差信号,对于绕飞行器纵轴本身转动的控制主要讨论了滚动稳定和倾斜稳定两种情况下误差信号的形成。详细推导了它们的计算公式。作为这个方法应用的例子,我们还讨论了如果飞行器上安装一个三轴平台或一组捷联式速率陀螺时,怎样由它们敏感的信号形成姿态控制误差信号,并给出了相应的姿态控制系统原理结构图。     

Progress of microgravity material research during the period of 2007—2009

Orbital experimental researches on crystal growth of Mn-doped GaSb and Bi2Se0.21Te2.79 are briefly summarized. The space experiments were completed in September of 2007 on broad the Foton-M3 satellite of Russia. Ground-based researches on the solidification behaviors of Al-Al3Ni, Al-Al2Cu, Ag-Cu eutectic, Al-Pb monotectic and Cu-Co peritectic alloys in a 50-meter-high drop tube were investigated. New experimental results on the ultrasonic field and the temperature recycling induced to chiral symmetry breaking of NaClO3 crystal also were reported in the present paper.      

航天器系统方案设计模式研究

航天器系统方案设计是航天器系统工程研制的关键阶段工作,直接决定了航天器的综合性能及研制成本。分析了当前系统方案设计模式存在的问题;根据航天器系统工程的特点及要求,提出了系统方案设计模式改进的原则与思路;重点从组建专职系统方案设计项目组、改进系统方案设计工作管理、完善系统方案设计过程方面,研究探讨了系统设计模式改进方案。     

航天器运输包装箱仿真验证平台技术研究

针对数量有限的物理跑车试验无法满足减振与保温性能测试需求的问题,提出一套航天器运输包装箱动力学与热学仿真验证方法,包括:建立适用于包装箱系统的刚柔耦合多体动力学系统,通过结合线路条件测试生成的动力学系统外部激励,实现减振性能虚拟跑车测试;建立基于计算流体力学的包装箱热学模型,通过模拟自然对流和空调控制,实现包装箱保温性...     

激光雷达对沉潜油探测的探索*

目前,人们对于海洋沉潜油的规律研究及控制水平较低,特别是探测30m深度以内的浅海地区的沉潜油分布信息,其主要原因是缺乏快速有效的探测手段。北京遥测技术研究所开发水下探测激光雷达样机,利用激光在海水中良好的透过特性,用于对水下沉潜油的探测以及对海底等目标的高精度探测。样机完成在水池中进行水下沉潜油的模拟探测试验,对沉潜油样本的典型激光回波信号进行采集分析,并测量模拟探测深度。试验结果基本符合设计预期,为进一步提升激光雷达沉潜油探测能力打下良好基础。     

WCO－32型第二代红外线轴温探测系统热轴判别标准的计算机算法

本文分析了用ＷＣＯ－３２型第二代红外线轴温探测设备判别热轴的计算机程序，得出其热轴判别的计算机流程图；根据对大量列车数据的统计和分析，得出各种车辆轴承轴温的分布图；运用概率论和数理统计方法，确定了第二代红外线热轴判别标准的几个主要参数的计算机算法。     

Reliability analysis of aero-engine blades considering nonlinear strength degeneration

To comprehensively consider the effects of strength degeneration and failure correlation, an improved stress-strength interference (SSI) model is proposed to analyze the reliability of aeroengine blades with the fatigue failure mode. Two types of TC4 alloy experiments are conducted for the study on the damage accumulation law. All the parameters in the nonlinear damage model are obtained by the tension-compression fatigue tests, and the accuracy of the nonlinear damage model is verified by the damage tests. The strength degeneration model is put forward on the basis of the Chaboche nonlinear damage theory and the Griffith fracture criterion, and determined by measuring the fatigue toughness during the tests. From the comparison of two kinds of degeneration models based on the Miner’s linear law and the nonlinear damage model respectively, the nonlinear model has a significant advantage on prediction accuracy especially in the later period of life. A time-dependent SSI reliability model is established. By computing the stress distribution using the finite element (FE) technique, the reliability of a single blade during the whole service life is obtained. Considering the failure correlation of components, a modified reliability model of aero-engine blades with common cause failure (CCF) is presented. It shows a closer and more reasonable process with the actual working condition. The improved reliability model is illustrated to be applied to aero-engine blades well, and the approach purposed in this paper is suitable for any actual machinery component of aero-engine rotor systems.     

SAR image formation via semiparametric spectral estimation

A new algorithm, referred to as the SPAR (Semiparametric) algorithm, is presented herein for target feature extraction and complex image formation via synthetic aperture radar (SAR). The algorithm is based on a flexible data model that models each target scatterer as a two-dimensional (2-D) complex sinusoid with arbitrary unknown amplitude and constant phase in cross-range and with constant amplitude and phase in range. By attempting to deal with one corner reflector, such as one dihedral or trihedral, at a time, the algorithm can be used to effectively mitigate the artifacts in the SAR images due to the flexible data model. Another advantage of SPAR is that it can be used to obtain initial conditions needed by other parametric target feature extraction methods to reduce the total amount of computations needed. Both numerical and experimental examples are provided to demonstrate the performance of the proposed algorithm     

带微处理器电路板的故障测试系统

本文介绍了一种采用通用总线仿真方法对带微处理器电路板进行故障测试的系统，并对板上部分电路提出了诊断思路和实现方法。