Evaluation of EarthRadar unexploded ordnance testing at Fort A.P.Hill, Virginia

Previously, K. Bakhtar and E. Sagal [ibid. vol. 17, pp. 4-11, 2002] made remarkable claims for the performance of the Bakhtar Associates ground-penetrating radar (GPR) in detecting and classifying buried unexploded ordnance (UXO). In this article, we report the results of the series of blind tests on the EarthRadar carried out during the Fall of 2000 and Spring of 2001, which led to very different conclusions regarding the radar's performance. The contents of this article are excerpted from the final report on the testing, prepared by the Institute for Defense Analyses     

Composition and physical properties of starch in microgravity-grown plants.

The effect of spaceflight on starch development in soybean (Glycine max L., BRIC-03) and potato (Solanum tuberosum, Astroculture-05) was compared with ground controls by biophysical and biochemical measurements. Starch grains from plants from both flights were on average 20-50% smaller in diameter than ground controls. The ratio delta X/delta rho (delta X --difference of magnetic susceptibilities, delta rho--difference of densities between starch and water) of starch grains was ca. 15% and 4% higher for space-grown soybean cotyledons and potato tubers, respectively, than in corresponding ground controls. Since the densities of particles were similar for all samples (1.36 to 1.38 g/cm3), the observed difference in delta X/delta rho was due to different magnetic susceptibilities and indicates modified composition of starch grains. In starch preparations from soybean cotyledons (BRIC-03) subjected to controlled enzymatic degradation with alpha-amylase for 24 hours, 77 +/- 6% of the starch from the flight cotyledons was degraded compared to 58 +/- 12% in ground controls. The amylose content in starch was also higher in space-grown tissues. The good correlation between the amylose content and delta X/delta rho suggests, that the magnetic susceptibility of starch grains is related to their amylose content. Since the seedlings from the BRIC-03 experiment showed elevated post-flight ethylene levels, material from another flight experiment (GENEX) which had normal levels of ethylene was examined and showed no difference to ground controls in size distribution, density, delta X/delta rho and amylose content. Therefore the role of ethylene appears to be more important for changes in starch metabolism than microgravity.     

First radiobiological results of LDEF-1 experiment A0015 with Arabidopsis seed embryos and Sordaria fungus spores.

This article highlights the first results of investigations on the general vitality and damage endpoints caused by cosmic ionizing radiation in dry, dormant plant seeds of the crucifer plant Arabidopsis thaliana (L.) Heynh. and the ascomycete Sordaria fimicola after 69 month stay in space. Wild-type and mutant gene marker lines were included in Free Flyer Biostack containers and exposed on earth and side tray of the LDEF-1 satellite. The damage in biological endpoints observed in the seeds increased in the side tray sample compared to the earth tray sample. For the ascospores we found different effects depending on the biological endpoints investigated for both expositions.     

Potential vascular damage from radiation in the space environment.

Cultured endothelial cells of blood vessels have a Do of 2 Gy for X-rays. A dose of 0.5 Gy of X-rays has an acute effect on vessel diameter. The vessels may show other acute effects such as change in permeability including a change in the blood brain barrier. Changes occurring from late effects of chronic exposure in vascular architecture include telangiectasia and decrease in vascular density. Changes in the perivascular connective tissue particularly collagen may play a role in these changes. After charged particle exposure of 15 and 30 Gy, radiation changes in the blood brain barrier and vascular changes are noted in the nervous system. These long term changes are recorded by PET, MRI, and CT imaging. Chronic exposure to alpha particles causes vascular damage in compact bone resulting in bone infarcts. Using tandem scanning confocal microscopy in-situ imaging of the capillaries and collagen of the papillary dermis provides a non-invasive method of serial recording of changes in irradiated microvasculature.     

Particle trajectories in seeds of Lactuca sativa and chromosome aberrations after exposure to cosmic heavy ions on Cosmos Biosatellites 8 and 9.

The potentially specific importance of the heavy ions of the galactic cosmic radiation for radiation protection in manned spaceflight continues to stimulate in situ, i.e., spaceflight experiments to investigate their radiobiological properties. Chromosome aberrations as an expression of a direct assault on the genome are of particular interest in view of cancerogenesis being the primary radiation risk for man in space. In such investigations the establishment of the geometrical correlation between heavy ions' trajectories and the location of radiation sensitive biological substructures is an essential task. The overall qualitative and quantitative precision achieved for the identification of particle trajectories in the order of approximately 10 micrometers as well as the contributing sources of uncertainties are discussed. We describe how this was achieved for seeds of Lactuca sativa as biological test organisms, whose location and orientation had to be derived from contact photographies displaying their outlines and those of the holder plates only. The incidence of chromosome aberrations in cells exposed during the COSMOS 1887 (Biosatellite 8) and the COSMOS 2044 (Biosatellite 9) mission was determined for seeds hit by cosmic heavy ions. In those seeds the incidence of both single and multiple chromosome aberrations was enhanced. The results of the Biosatellite 9 experiment, however, are confounded by spaceflight effects unrelated to the passage of heavy ions.     

Synthetic vision for enhancing poor visibility flight operations

Visibility is important for the pilot controlling an aircraft in flight conditions close to the ground, particularly when landing. Therefore, poor visibility yields a great restriction for aircraft operations. Restrictions exist for landing sites which are equipped with facilities providing a landing approach aid like ILS since a minimum is required for visibility. For landing sites providing no approach aids, restrictions are much more severe. This holds even if aircraft are equipped with modern instrumentation and navigation devices. The natural view of the pilot is dependent on various meteorological conditions like darkness, dust, fog, rain etc. The degradation in view caused by these conditions can be compensated for partially or even completely by technical means providing artificial vision cues. Such technical means may be based on radar or optical sensor information. Concepts which employ these techniques are known as “Synthetic Visual Systems” or “Enhanced Visual Systems,” . The present paper is concerned with computer generated vision as a further technique providing visual cues for the pilot. Computer generated vision may be used in combination with the aforementioned sensor based techniques. Thus, it is possible to compensate for limitations which sensor based visual systems have in providing sufficient visibility range or in generating a normal looking image. In addition, computer generated imagery has the potential providing additional information to the pilot for controlling the flight path or for warning purposes. This potential can yield improved and/or more information as compared with the natural view when looking out of the cockpit window     

Current status, architecture, and future technologies for theInternational Space Station electric power system

The Electric Power System (EPS) being built for the International Space Station has undergone several significant changes over the last year, as major design decisions have been made for the overall station. While the basic topology and system elements have remained the same, there are important differences in connectivity, assembly sequence, and start-up. The key drivers for these changes in architecture have been the goal to simplify verification, and most significantly, the introduction of extensive Russian participation in the program. Having the Russians join the international community in this project has resulted in an expanded station size, larger crew, and almost doubled the observable surface of the Earth covered by the station. For the power system it has meant additional interfaces for power transfer, and new challenges for solar tracking at the higher inclination orbit. This paper reviews the current architecture and emphasizes the new features that have evolved, as the design for the new, larger station has developed. Additionally, the possible application of developing technology to the station, and other future missions is considered     

Multitarget detection using Kalman-based average displacementestimator

The anomaly in the displacement estimates obtained from a low-level Kalman-based average displacement estimator is used to detect multiple targets in a forward-looking infrared (FLIR) scene. The displacement estimates originating from the targets could be associated with the detected multiple targets and an updated estimated position of the target could be obtained. This procedure could be repeated for all targets in the scene to obtain multitarget tracking. The behavior of the expected value of the displacement estimates as a function of the number of iterations is investigated. The behavior of the displacement error covariance matrix and the Kalman gain matrix are discussed as functions of the number of iterations     

Fuel cell technology status

Several major fuel cell projects and their status are described. The fuel cell types discussed are phosphoric acid, molten carbonate, solid oxide, and polymer. One of the technologies is very close to commercialization. Two others offer the possibility for higher efficiency and large capacity electric generation using coal. Still another may be the answer to the key issues facing the transportation sector     

Data path synthesis in digital electronics. I. Memory allocation

A data path consists of memory elements (i.e., registers), data operators (i.e. ALUs) and interconnection units (i.e. buses) to control the data transfers in the digital system. Many approaches to hardware allocation for data path synthesis have been proposed in the literature; however, only single-port memory is considered for register allocation and no efficient synthesis approach for multiport memory synthesis. A novel design methodology for data path synthesis using multiport memories is proposed which can be applied to hardware allocation algorithms or to already synthesized data path as a postprocessor to achieve a better design. Illustrations of applying this method to different synthesis examples are presented. Results and improvements over previous techniques are demonstrated. Experiments on benchmarks show very promising results