Airborne radar: its beginnings in World War II

Although not realized at the time, the defeat of the German Air Force in the summer of 1940 was one of the crucial battles of World War II. The narrow margin of victory can be ascribed to Britain's air-warning radar, Chain Home (CH), consisting of the 15-meter CH and the 1.5-meter CHL. The skillful use of this equipment by the Royal Air Force made daylight bombing unsustainable; the Luftwaffe then turned to night attacks, generally called "The Blitz." These were not effective in destroying military and industrial targets and depended on the hope of reducing the population's will to fight. Chain Home was of little use except to observe the attackers arrival, as it had almost no ability to follow the attackers as they proceeded inland. This eventuality was reckoned with before the outbreak of hostilities and had called for radars mounted in night fighters capable of guiding the pilot close enough to the target for him to open fire visually. The electronic techniques used at 1.5-meters were adapted to planes capable of carrying the radar and its operator. But there were three important design constraints: 1) the antennas had to be restricted to sizes that were practical for installation on aircraft, which for meter waves gave them low gain and large side lobes; 2) the set's maximum range was limited by the fighter's altitude as a result of the huge ground returns from the side lobes. British antiaircraft artillery, the stepchild of their arms, was too ineffective to drive the bombers to extreme altitudes; and 3) a minimum range had to be held until the flier could see his target, which strained the pulse techniques of the time.     

HMS SCOTT ring laser gyro navigator integration

HMS SCOTT is a United Kingdom ocean survey vessel that hosts a state-of-the-art deep ocean mapping system which was designed, developed, and is currently maintained and periodically updated by the Space and Naval Warfare Systems Center, San Diego, (SSC San Diego). A recent update of this system consisted of the replacement of an obsolete and very costly to maintain inertial navigation system. Another reason for updating the ship's inertial system was to provide higher accuracy attitude data, than was previously available with the old inertial system, to the high resolution multi-beam sonar system in order to produce improved bathymetric charts. After conducting a market survey of suitable inertial navigator systems, the Kearfott SEANAV ring laser gyro navigator (RLGN) system, using a monolithic T-24 gyro, was selected to replace the old inertial system. The selection of the SEANAV RLGN was based on its relatively low cost, high reliability, and, particularly, the roll and pitch data accuracies of typically less than 1-arc-minute. This attitude data accuracy was key to enable a significant improvement in the bathymetry data accuracy. Two SEANAV systems were integrated with GPS receivers, a system master time code generator, and electro magnetic (EM) log and Doppler sonar speed sensors to provide the navigation portion of the mapping data. Operational testing of this updated system aboard HMS SCOTT, in November, 2003, showed a marked improvement in the quality of the map product due, in part, to the improved attitude data provided by the SEANAV RLGN system.     

Automotive-grade MEMS sensors used for general aviation

The attitude heading reference system (AHRS) provides data for primary flight instruments, head-up displays, autopilots, and moving map navigation systems. Advances in solid-state MEMS rate sensors, coupled with Kalman filter algorithms designed to mitigate high drift rates, provide the basis for low-cost, high-performance AHRS for general aviation. This paper describes the performance of a low cost, miniaturized AHRS using automotive-grade MEMS sensors. The performance of the system is detailed. The implications for certification of this class of system and fault tolerance are discussed.     

Wireless interconnection to test instruments

Manufacturers are increasingly offering Ethernet connectivity on their test instruments. An additional benefit of this connection method is the ease of conversion to wireless connectivity. This paper describes the Ethernet interface used in the remote control of a RF power amplifier and describes the conversion to wireless connection.     

Reduced-order multiple model adaptive controller for flexiblespacestructure

The robustness of a moving-bank multiple model adaptive estimator/controller to order reduction in the controller design model is examined. It is shown that the adaptive mechanism and bank-moving logic are not confounded by the effects of unmodeled higher order modes of a large flexible spacestructure. Control characteristics are achieved that are essentially equivalent to those of an artificially informed benchmark controller     

An experiment with an S-band radar using pulse compression andrange sidelobe suppression for meteorological measurements

A major technology barrier to the application of pulse compression for the meteorological functions required by a next generation ATC radar is range/time sidelobes which mask and corrupt observations of weak phenomena occurring near areas of strong extended meteorological scatterers. Techniques for suppressing range sidelobes are well known but without prior knowledge of the scattering medium's velocity distribution their performance degrades rapidly in the presence of Doppler. Recent investigations have presented a “doppler tolerant” range sidelobe suppression technique. The thrust of the work described herein is the extension of previous simulations to actual transmitted dispersed/coded waveforms using the S-band surveillance radar located at Rome Laboratory Surveillance Facility. The objectives of the experiment are: 1) to extend the verification of the simulation of the Doppler tolerant technique; and 2) to demonstrate that the radar transmitter, waveform generator, and receiver imperfections do not significantly degrade resolution, performance or reliability of meteorological spectral moment estimates     

Automated video protection, monitoring & detection

The latest generation of computer vision technology is revolutionizing concepts, applications, and products in video surveillance and CCTV. This is of prime relevance to security for large outdoor facilities such as commercial airfields, refineries, power plants, and office/industrial campuses. Most airfields, for example, have open (unfenced) perimeters, high volume heterogeneous traffic, are easily accessed on foot or by water, and exist in areas where regulations providing a safety buffer are difficult to legislate or enforce. And all airfields require 24/7 outdoor monitoring - snow, fog, rain, or shine. Likewise, most high-value facilities appealing to criminals and terrorists are in close proximity to public areas (roads, residences, city, etc.). The appeal of automated real-time surveillance is obvious $maximizing efficiency and effectiveness of security personnel and resources while increasing the probability of preventing a serious security breach. Computer vision based solutions have the potential for very discriminating detection and very low false alarms. The bottom line is that applied computer vision has the potential for the greatest return on investment (ROI), both short-term and long-term.     

Satellite mobile communications spread-spectrum receiver

Since 1999, ESA has conducted a number of system studies and technological developments to support the European and Canadian industry in the definition of a Satellite UMTS (S-UMTS) component development strategy, identifying critical technological areas and promoting S-UMTS demonstrations. In particular, the MUSIC project has successfully demonstrated advanced digital signal processing techniques to mitigate CDMA interference in spread-spectrum receivers, thus increasing the capacity and/or quality of service of a wireless communication network. The low-complexity solution for interference mitigation investigated and developed in the project is particularly suited for being implemented in mobile terminals.     

Inverse-compton gamma rays from plerions

Young pulsars surrounded by supernova remnants can power synchrotron nebulae through the injection of relativistic particles. Inverse Compton scattering by the high-energy electrons and positrons can produce TeV gamma-ray emission strong enough to be detectable by ground-based telescopes. The Crab nebula is the archetypical example of a gamma-ray plerion and was the first detected TeV source. The observed spectrum is consistent with predictions of synchrotron-self Compton models. This paper will review such models for the Crab and other plerions. Inverse-Compton scattering on other soft photon sources, particularly the 2.7K microwave background, may also be detectable in older remnants.     

Morphological synthesis method of search for promising technicalsystem

The work studies the application of the morphological (structural) synthesis method of search for the new technical approaches. The method is based on the application of the theory of system, morphological and cluster analysis, methods of mathematics simulation and calculation experiments made by computer. The work shows how this method is used to synthesize the landing spacecrafts, hypersonic spacecrafts and medical equipment and gives the comparison of the present and synthesized technical systems (TS). The conclusion is that this method increases the degree of the validity decision made and broadens the number of possible variants which allows an increase in the quality (technical level) of the TS under development. The work also points out that the method allows the system to search for promising inventions to solve the problems of prognostication and to single out the trends of TS evolution. It also allows the system to single out these systems which are able to respond flexibly to the changing external conditions with the lowest expense, and therefore, increases the compatibility of the chosen TS