数据采集系统直流增益和线性度的精确评价

介绍了两种新的精确评价数据采集系统的直流增益和线性度的方法与过程,即“按码精确评价法”和“定间距（为量化误差整数倍）精确评价法”。同时讨论了介绍了的优缺点及应用。     

Characteristics of low-latitude whistlers and their relation with f0F2 and magnetic activity

Some results obtained from the characteristics of low-latitude whistlers received at Wuchang (Geomag. Lat. 19.2°N), Zhanjiang (9.8°N) and Yulin (6.4°N) are presented. The observations cover three years at Wuchang, two years at Zhanjiang, one year at Yulin.     

基于LabVIEW的通信系统的构建

本设计基于LabVIEW仿真软件完成了基本通信系统和通信综合系统的构建。该系统涵盖了模拟调制,数字调制,模拟信号数字传输,信道编码,最佳接收系统几部分内容。通过系统仿真,实现了系统输入输出波形的直观显示,解决了教学中实验效果不理想,理论内容不好理解的问题。同时通过内置的Web Server进行网页发布后,用户可以在客户端通过web浏览器远程调用并运行本系统,提高效率,节约成本。     

测量船船摇前馈数据处理方法研究及应用

船摇前馈是航天测量船稳定性设计方法之一。实践证明,船摇前馈对改善系统误差有益,目标速度前馈特别是加速度前馈的改善效果要比船摇前馈的好。分析原因,一方面是目标相对船摇来说变化慢,低频分量多,滤波后能够比较准确地得到所要的值,前馈精度也就高;另一方面是船摇前馈值特别是加速度前馈比较难以准确获得。因此,准确地计算前馈量,是补偿测量设备伺服系统滞后造成的误差,达到高精度地跟踪目标的关键之一。本文详细给出了船摇前馈量的具体计算公式,并在卫星发射任务中进行了应用和验证。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

构建廊坊市政府新型服务管理体系——知识管理

本文试着以廊坊市政府知识管理体系建设为切入点,作为打开市政府知识管理大门的钥匙,在发展完善知识管理理论体系、开拓知识库应用领域的同时,对促进政府适应知识经济发展、向知识型政府转变有一定的启发和指导作用。     

铁基金刚石节块的热处理及其耐磨性能研究

首次提出了在烧结型金刚石工具的制造中引入热处理的新工艺，并系统地研究了淬火温度、淬火时间及回火温度等热处理工艺参数对热压烧结型铁基金刚石圆盘锯节块及其胎体材料机械性能的影响，同时对经热处理的铁基金刚石圆盘锯节块在石材旺苍红上进行磨损试验研究。试验结果表明，热压烧结型铁基金刚石圆盘锯节块胎体热处理的最佳工艺参数为：淬火温度为７６０～７９０℃、淬火时间为３．５ｍｉｎ、回火温度为２４５～３１５℃；经热处理后铁基金刚石圆盘锯胎体及节块的强度、硬度等机械性能有显著的提高，热处理也能明显改善铁基金刚石圆盘锯节块的耐磨性能。这说明将热处理工艺用于烧结型金刚石工具的制造中是切实可行的。     

一种语音信号欠定盲分离的新方法

文章提出了一种语音信号欠定盲分离的新方法,引入了一种伪提取矢量的概念,并通过在信号采样点处选取对应的伪提取矢量,以恢复取值占优的源信号采样点的值,来实现欠定盲源分离。通过将该方法与传统的基于线性规划的欠定盲源分离方法分别仿真表明:文章所提出方法由于在信号的各采样点处无需优化,因此大大提高了信号分离的速度,语音信号的分离速度比基于线性规划的方法快数倍。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.