Effect of volatile metabolites of dill, radish and garlic on growth of bacteria

In a model experiment plants were grown in sealed chambers on expanded clay aggregate under the luminance of 150 W/m2 PAR and the temperature of 24 degrees C. Seven bacterial strains under investigation, replicated on nutrient medium surface in Petri dishes, were grown in the atmosphere of cultivated plants. Microbial response was evaluated by the difference between colony size in experiment and in control. In control, bacteria grew in the atmosphere of clean air. To study the effects of volatile metabolites of various plant on microbial growth, the experimental data were compared with the background values defined for each individual experiment. Expanded clay aggregate, luminance, temperature, and sealed chamber (without plants) for the background were the same. Volatile metabolites from 28-days old radish plants have been reliably established to have no effect on the growth of microbes under investigation. Metabolites of 30-days old dill and 50-days old garlic have been established to have reliable bacteriostatic effect on the growth of three bacterial strains. Dill and garlic have been found to have different range of effects of volatile substances on bacterial growth. Volatile metabolites of dill and garlic differed in their effect on the sensitivity spectrum of bacteria. An attempt has been made to describe the obtained data mathematically.     

ESA developments in life support technology: achievements and future priorities.

Following an enthusiastic start in 1985, ESA's life support technology development programme was re-assessed in the mid- to late-1990s to reflect the strong reduction in European manned space ambitions which occurred at that time. Further development was essentially restricted to activities that could constitute ISS upgrades or enhancements, or support ISS utilisation/operations, together with a single, limited, activity (MELISSA) aimed at bioregenerative life support, in the continuing hope that there might be "life after Station". The paper describes the current status of these activities and summarises the main priorities for future development that were identified at the April 1999 Workshop on Advanced Life Support.     

SIGMA observations of two new hard X-ray and soft gamma-ray transients: GX 354-0 and Nova Persei

We report the first detection of two soft gamma ray transients GX 354-0 and Nova Persei (GRO J0422+32) by the coded-mask telescope SIGMA. Only preliminary results are presented with regard to Nova Persei while special emphasis is given to the data on GX 354-0 which has been monitored during the 1992 February–April survey of the Galactic Center. GX 354-0 underwent two flares of about two week duration and its average spectrum is well described by a thermal Bremsstrahlung model or a broken power law whereas the Nova Persei spectrum seems to be similar to the one observed for GRS 1124-684 in Musca.     

Deriving the spin rate/orientation from the quiescent spacecraft ABRIXAS using optical observations

With the loss of the battery system of ABRIXAS shortly after launch and consequent absence of telemetry, there was urgent need to determine ABRIXAS' spin rate and orientation in order to assess the possibility of re-establishing telemetry during periods of full-Sun orbits. We, therefore, conducted optical and video observations of ABRIXAS passages with a 1-second time resolution, and later simulated the optical appearance of ABRIXAS for several passages based on a three-dimensional model of the reflectivity properties of the 2.5m × 1.8m × 1.2m size-satellite. Here we present the results of the comparison of our grid of light curve models with the observations and show (i) how the spin rate of ABRIXAS slowed down between June and December 1999 and (ii) what information can be deduced on the temporal change of the orientation of the spin axis. We conclude with discussing the benefit of using ground based optical observation as a cost effective way to develop information about the orientation of a satellite when there is no telemetry.     

An Optimally Integrated Track Recovery System for Aerial Bathymetry

An airborne system has been developed for charting shallow coastal and inland waters. The primary components of this system are an aerial survey camera, a profiling laser radar, an analytical stereo plotter, and a multisensor track recovery system (TRS). The TRS comprises a gimbaled inertial navigation system and a number of auxiliary sensors which acquire redundant position and attitude information. The sensor data are combined postmission using a U-D factorized Kalman filter and modified Bryson-Frazier smoother to compute accurate estimates of the orientation parameters of the survey camera at the times of film exposure. These parameters are used to position each overlapping pair of photographs on the analytical plotter to form a stereo image and corresonding analytical stereomodel from which water depth measurements are made. Flight trial results demonstrate that the TRS can achieve radial position and attitude accuracies which exceed 1 m and 2 arcmin root mean square (rms), respectively, and that this level of performance is sufficient to enable water depth measurements to be made to an accuracy of better than 0.65 m (rms).     

Liquid phase sintering of tungsten composites in space: Results of tests performed in Texus

Tungsten-nickel-iron composites are commersially fabricated from powders by liquid phase sintering. They consist of almost spherical tungsten particles in a matrix of nickel-iron-tungsten. A way to contribute to the understanding of the sintering mechanism and the mechanical properties is to study composites with a low amount of tungsten particles. Depending on the great difference in density between the particles and the matrix, this can only be done under microgravity. A primary sintering test of the tungsten composite was done in space using the Texus 10 modul. Prealloys were fabricated from metal powder mixtures, which were hot isostatic pressed. Liquid phase sintering of the two tungsten composites under microgravity has shown that the particles are evenly distributed and that no segregation occured due to convection. Despite an uneven distribution of the particles in the preformed specimens and the short melting period the patricle distribution has become even. Compared to short time sintering tests made on four alloys in the laboratory, the growth and separation of the particles was fast.     

Baseband Modeling and Distortion Equalization of the DeLange FM Oscillator by Functional Methods

Exact and approximate baseband models of the DeLange frequency-modulated oscillator are derived. Exact and approximate baseband distortion equalizers, that may be used to predistort the modulation voltage so that the distortion in the output phase of the oscillator is removed, are also given.     

A UHF True Logarithmic IF Amplifier

A UHF ?true logarithmic IF? which yields a carrier output proportional in amplitude to the logarithm of the carrier input has been constructed. Although this ?true? form has been known for a number of years, it appears to have been neglected in development. Good performance has been obtained over a 60-dB input signal range with rise and fall times of 2 ns per 20 dB. A high-level, detected dc coupled output without the use of any dc amplifier is obtained. Coherent signal processing of the output carrier is possible, and other important advantages to this type of logarithmic IF are described.     

Simplified Optimum Modulation Indices

The design of a narrowband, phase-modulated, multisubcarrier, phase-coherent, space-communication system requires that the subcarrier modulation indices be kept within close tolerance limits. This need arises since the modulation indices directly affect the division of power among the carrier and subcarriers. If the system is not designed in an optimum manner to handle large tolerance variation, the system performance may degrade sharply in an adverse environment. A universal graphical technique?modulation loss contours?is developed as a design tool for the ?optimum? selection of modulation indices. The technique is novel in that it yields solutions directly from the universal curves and does not require the drawing of additional curves. Two criteria of optimization are considered, simultaneous thresholding and minimal sensitivity. The minimally sensitive case is considered as weighted simultaneous thresholding and is solved by the aid of a graphical algorithm. The technique is applicable to k subcarriers (sinusoidal and/or square wave), considering three subcarriers at a time-two subcarriers as direct variables and the third as a parameter?all other subcarriers remaining constant. Previous techniques required trial and error methods, drawing of curves, or computerized search techniques to arrive at the proper modulation indices and maximum tolerance bands. This method allows a quick solution to the tolerance problem and optimum selection of modulation indices, facilitating the design and/or analysis of narrowband PM systems.