METHIS: Mercury thermal infrared spectrometer

The BepiColombo mission to Mercury is devoted to the thorough exploration of Mercury and its environment, with the aim to understand the processes of planetary formation and evolution in the hottest part of the protoplanetary nebula. This mission represents an unique opportunity for the European community to extend the understanding of the Solar Nebula evolution from its outer edge – ideally represented by comets – to its inner and warmer edge. Obviously this exploration asks for a detailed knowledge of the main constituents of the matter present in the different Solar System areas. Spectroscopy is a powerful tool to acquire this knowledge. We have participated with a large consortium of European researchers to the development of the Rosetta imaging spectrometer. We propose here to use our experience to develop a newly designed spectrometer to investigate the mineralogical composition of the Mercurial surface. Given the particular thermodynamical situation of the Mercurial surface, we have developed a concept that combines a medium IR low spectral resolution imager with a moderate spectral resolution NIR point spectrometer. The main goal of METHIS is to provide the mineralogical characterisation of the surface with sufficient spectral resolution in a scientifically diagnostic spectral range.     

The Characterisation of Titan's Atmospheric Physical Properties by the Huygens Atmospheric Structure Instrument (Hasi)

The Huygens Atmospheric Structure Instrument (HASI) is a multi-sensor package which has been designed to measure the physical quantities characterising the atmosphere of Titan during the Huygens probe descent on Titan and at the surface. HASI sensors are devoted to the study of Titan's atmospheric structure and electric properties, and to provide information on its surface, whether solid or liquid. This revised version was published online in August 2006 with corrections to the Cover Date.     

The VIR Spectrometer

The Dawn spectrometer (VIR) is a hyperspectral spectrometer with imaging capability. The design fully accomplishes Dawn’s scientific and measurement objectives. Determination of the mineral composition of surface materials in their geologic context is a primary Dawn objective. The nature of the solid compounds of the asteroid (silicates, oxides, salts, organics and ices) can be identified by visual and infrared spectroscopy using high spatial resolution imaging to map the heterogeneity of asteroid surfaces and high spectral resolution spectroscopy to determine the composition unambiguously. The VIR Spectrometer—covering the range from the near UV (0.25 μm) to the near IR (5.0 μm) and having moderate to high spectral resolution and imaging capabilities—is the appropriate instrument for the determination of the asteroid global and local properties. VIR combines two data channels in one compact instrument. The visible channel covers 0.25–1.05 μm and the infrared channel covers 1–5.0 μm. VIR is inherited from the VIRTIS mapping spectrometer (Coradini et al. in Planet. Space Sci. 46:1291–1304, 1998; Reininger et al. in Proc. SPIE 2819:66–77, 1996) on board the ESA Rosetta mission. It will be operated for more than 2 years and spend more than 10 years in space.     

Virtis: An Imaging Spectrometer for the Rosetta Mission

The VIRTIS (Visual IR Thermal Imaging Spectrometer) experiment has been one of the most successful experiments built in Europe for Planetary Exploration. VIRTIS, developed in cooperation among Italy, France and Germany, has been already selected as a key experiment for 3 planetary missions: the ESA-Rosetta and Venus Express and NASA-Dawn. VIRTIS on board Rosetta and Venus Express are already producing high quality data: as far as Rosetta is concerned, the Earth-Moon system has been successfully observed during the Earth Swing-By manouver (March 2005) and furthermore, VIRTIS will collect data when Rosetta flies by Mars in February 2007 at a distance of about 200 kilometres from the planet. Data from the Rosetta mission will result in a comparison – using the same combination of sophisticated experiments – of targets that are poorly differentiated and are representative of the composition of different environment of the primordial solar system. Comets and asteroids, in fact, are in close relationship with the planetesimals, which formed from the solar nebula 4.6 billion years ago. The Rosetta mission payload is designed to obtain this information combining in situ analysis of comet material, obtained by the small lander Philae, and by a long lasting and detailed remote sensing of the comet, obtained by instrument on board the orbiting Spacecraft. The combination of remote sensing and in situ measurements will increase the scientific return of the mission. In fact, the “in situ” measurements will provide “ground-truth” for the remote sensing information, and, in turn, the locally collected data will be interpreted in the appropriate context provided by the remote sensing investigation. VIRTIS is part of the scientific payload of the Rosetta Orbiter and will detect and characterise the evolution of specific signatures – such as the typical spectral bands of minerals and molecules – arising from surface components and from materials dispersed in the coma. The identification of spectral features is a primary goal of the Rosetta mission as it will allow identification of the nature of the main constituent of the comets. Moreover, the surface thermal evolution during comet approach to sun will be also studied.     

Exploring The Saturn System In The Thermal Infrared: The Composite Infrared Spectrometer

The Composite Infrared Spectrometer (CIRS) is a remote-sensing Fourier Transform Spectrometer (FTS) on the Cassini orbiter that measures thermal radiation over two decades in wavenumber, from 10 to 1400 cm^{− 1} (1 mm to 7μ m), with a spectral resolution that can be set from 0.5 to 15.5 cm^{− 1}. The far infrared portion of the spectrum (10–600 cm^{− 1}) is measured with a polarizing interferometer having thermopile detectors with a common 4-mrad field of view (FOV). The middle infrared portion is measured with a traditional Michelson interferometer having two focal planes (600–1100 cm^{− 1}, 1100–1400 cm^{− 1}). Each focal plane is composed of a 1× 10 array of HgCdTe detectors, each detector having a 0.3-mrad FOV. CIRS observations will provide three-dimensional maps of temperature, gas composition, and aerosols/condensates of the atmospheres of Titan and Saturn with good vertical and horizontal resolution, from deep in their tropospheres to high in their mesospheres. CIRS’s ability to observe atmospheres in the limb-viewing mode (in addition to nadir) offers the opportunity to provide accurate and highly resolved vertical profiles of these atmospheric variables. The ability to observe with high-spectral resolution should facilitate the identification of new constituents. CIRS will also map the thermal and compositional properties of the surfaces of Saturn’s icy satellites. It will similarly map Saturn’s rings, characterizing their dynamical and spatial structure and constraining theories of their formation and evolution. The combination of broad spectral range, programmable spectral resolution, the small detector fields of view, and an orbiting spacecraft platform will allow CIRS to observe the Saturnian system in the thermal infrared at a level of detail not previously achieved.This revised version was published online in July 2005 with a corrected cover date.     

The Juno Mission

The selection of the Discovery Program InSight landing site took over four years from initial identification of possible areas that met engineering constraints, to downselection via targeted data from orbiters (especially Mars Reconnaissance Orbiter (MRO) Context Camera (CTX) and High-Resolution Imaging Science Experiment (HiRISE) images), to selection and certification via sophisticated entry, descent and landing (EDL) simulations. Constraints on elevation (\({\leq}{-}2.5\ \mbox{km}\) for sufficient atmosphere to slow the lander), latitude (initially 15°S–5°N and later 3°N–5°N for solar power and thermal management of the spacecraft), ellipse size (130 km by 27 km from ballistic entry and descent), and a load bearing surface without thick deposits of dust, severely limited acceptable areas to western Elysium Planitia. Within this area, 16 prospective ellipses were identified, which lie ～600 km north of the Mars Science Laboratory (MSL) rover. Mapping of terrains in rapidly acquired CTX images identified especially benign smooth terrain and led to the downselection to four northern ellipses. Acquisition of nearly continuous HiRISE, additional Thermal Emission Imaging System (THEMIS), and High Resolution Stereo Camera (HRSC) images, along with radar data confirmed that ellipse E9 met all landing site constraints: with slopes <15° at 84 m and 2 m length scales for radar tracking and touchdown stability, low rock abundance (<10 %) to avoid impact and spacecraft tip over, instrument deployment constraints, which included identical slope and rock abundance constraints, a radar reflective and load bearing surface, and a fragmented regolith ～5 m thick for full penetration of the heat flow probe. Unlike other Mars landers, science objectives did not directly influence landing site selection.     

Numerical simulations of the radiance from the comet 46P/Wirtanen in the various configurations of the measurements during “Rosetta” mission

The work we present deals with the spectrometric measurements of VIRTIS instrument of the Comet P/Wirtanen planned for the Rosetta mission. This spectrometer can monitor (VIRTIS M channel: 0.250μm – 0.980μm; Δκ=20cm⁻¹; 0.980 – 5.0 μm; Δκ = 5cm⁻¹; VIRTIS H channel: 2.0 μm – 5.0 μm; Δκ=2cm⁻¹) the nucleus and the coma in order to provide a general picture of coma's composition, the production of gas and dust, the relationship of coma production to surface composition and the structure and variation of mineralogy of the nucleus surface. During the mission the observation conditions of the spectroscopic investigation change due to different relative positions spacecraft/comet, and to the different illumination conditions of the surface at various distances of the comet to the Sun. The nucleus surface is continuously modified by the ice sublimation accompanied by gas and dust emission. Consequently the surface also its spectrophotometric properties changes and their monitoring can give a new insight. The important role of simulations is to predict the results of measurements in various experimental condition what, in the future, can help in interpretation of the measured data.

In this paper the first results of our simulation the radiance from the comet in the 0.25–5.0μm spectral range at two distances from the Sun (1AU and 3AU) are shown. The distance between the Rosetta orbiter and the nucleus surface as well as the sun zenith angles are taken into account according to the Rosetta mission phases. In fact the surface and coma properties vary along the comet orbit, and should be taken into account in our calculations. The optical parameters of the dust on the surface (e.g. reflectance) and in the coma (e.g. Q_ext) were calculated from optical constants of possible comet analogues. The thermodynamic parameters of the comet are taken from the models of comet evolution. Through this kind of modelling it is possible to identify the surface characteristics in spectra of the radiation from the surface of nucleus transmitted through the coma loaded with dust and gases.

Even if the “Rosetta mission” is postponed, with the consequence of a target change, we think that our idea and the method used for the simulations can be useful also for the new Rosetta target - the comet 67P/Churyumov Gerasimenko.