Measurement and assessment of wind tunnel flow quality

For decades, wind tunnel testing has been conducted in test section environments that have not been adequately or consistently documented. Since wind tunnel flow quality can adversely affect test results, accurate and consistent flow quality measurements are required, along with an understanding of the sources, characteristics, and management of flow turbulence. This paper will review turbulence measurement techniques and data obtained in subsonic, transonic, and supersonic test facilities as they relate to the determination and assessment of wind tunnel flow quality. The principles and practical application of instrumentation used in the measurement and characterization of wind tunnel turbulence will be described. Techniques used for the identification of the sources of wind tunnel disturbances, and the performance of turbulence suppression devices will be outlined. These test techniques will be illustrated with extensive measurements obtained in a number of test facilities. The measurements will provide comprehensive turbulence data that are vital to the assessment and management of flow quality. Procedures designed to assess the potential influence of adverse flow quality on wind tunnel model test performance will also be discussed.     

ATM performance measurement in Europe,the US and China

Air traffic management (ATM) performance and the metrics used in its assessment are investigated for the first time across the three largest ATM world regions: Europe, the US and China. The market structure and flow management practices of each region are presented. A wide range of performance data across these three regions is synthesised. For topological and performance assessment, the notion of a 'sufficient' sample is often non-intuitive: many metrics may behave non-monotonically as a function of sampling fraction. Missing and under-developed metrics are identified, and the need for a balance between standardisation and flexibility is proposed. Longitudinal and cross-sectional metric trade-offs are identified.     

Theories and Observations of Ion Energization and Outflow in the High Latitude Magnetosphere

A review is given of several mechanisms causing outflow at high latitudes of ionospheric ions to the terrestrial magnetosphere. The upward ion motion along the geomaagnetic field can be divided into several categories, including polar wind, bulk ion outflow in the auroral region, upwelling ions and ion conics and beams. More than one ion energization mechanism can be operating within each category, and a combination of categories is important for the total ion outflow.     

Theoretical Aspects of Dark Matter Detection

Direct and indirect dark matter detection relies on the scattering of the dark matter candidate on nucleons or nuclei. Here, attention is focused on dark matter candidates (neutralinos) predicted in the minimal supersymmetric standard model and its constrained version with universal input soft supersymmetry-breaking masses. Current expectations for elastic scattering cross sections for neutralinos on protons are discussed with particular attention to satisfying all current accelerator constraints as well as insuring a sufficient cosmological relic density to account for the dark matter in the universe.     

Place learning in humans: The role of distance and direction information

Although the process of establishing a memoryof a location is necessary for navigation,relatively little is known about theinformation that humans use when forming placememories. We examined the relative importanceof distance and angular information aboutlandmarks in place learning. Participantsrepeatedly learned a target location inrelation to three distinct landmarks in animmersive computer-generated (virtual)environment. Later, during testing, theyattempted to return to that location. Theconfigurations of landmarks used during testingwere altered from those participants learned inorder to separate the effects of metricdistance information and information aboutinter-landmark angles. In general,participants showed greater reliance ondistance information than angular information. This reliance was affected by nonmetricrelationships present during learning, as wellas by the degree to which the learnedenvironment contained right or straightangles.     

Launch and Early Operation of the MESSENGER Mission

On August 3, 2004, at 2:15 a.m. EST, the MESSENGER mission to Mercury began with liftoff of the Delta II 7925H launch vehicle and 1,107-kg spacecraft including seven instruments. MESSENGER is the seventh in the series of NASA Discovery missions, the third to be built and operated by The Johns Hopkins University Applied Physics Laboratory (JHU/APL) following the Near Earth Asteroid Rendezvous (NEAR) Shoemaker and Comet Nucleus Tour (CONTOUR) missions. The MESSENGER team at JHU/APL is using efficient operations approaches developed in support of the low-cost NEAR and CONTOUR operations while incorporating improved approaches for reducing total mission risk. This paper provides an overview of the designs and operational practices implemented to conduct the MESSENGER mission safely and effectively. These practices include proven approaches used on past JHU/APL operations and new improvements implemented to reduce risk, including adherence to time-proven standards of conduct in the planning and implementation of the mission. This paper also discusses the unique challenges of operating in orbit around Mercury, the closest planet to the Sun, and what specific measures are being taken to address those challenges.     

应用绿色半导体量子点进行乳腺癌原位成像

乳腺癌是癌症中引起妇女死亡的首要因素。本文采用绿色量子点作为荧光显色材料，建立了一种用于早期乳腺癌诊断的原位成像技术。利用生物素标记的抗HER2／neu抗体与乳腺癌细胞表面表达的HER2结合的特点，然后用偶联绿色量子点的链霉亲和素作为荧光检测标记物，与HER2抗原抗体复合物中的生物素发生特异结合，检测出乳腺癌细胞的存在。结果表明，在荧光显微镜下用绿色量子点原位显色的乳腺癌细胞，相对有机染料组显色亮度增强，故检测灵敏度有所提高。     

Sandwich module prototype progress for space solar power

Space solar power (SSP) has been broadly defined as the collection of solar energy in space and its wireless transmission for use on earth. This approach potentially gives the benefit of provision of baseload power while avoiding the losses due to the day/night cycle and tropospheric effects that are associated with terrestrial solar power. Proponents have contended that the implementation of such systems could offer energy security, environmental, and technological advantages to those who would undertake their development. Among recent implementations commonly proposed for SSP, the modular symmetrical concentrator (MSC) and other modular concepts have received considerable attention. Each employs an array of modules for performing conversion of concentrated sunlight into microwaves or laser beams for transmission to earth. While prototypes of such modules have been designed and developed previously by several groups, none have been subjected to the challenging conditions inherent to the space environment and the possible solar concentration levels in which an array of modules might be required to operate. The research described herein details our team's efforts in the development of photovoltaic arrays, power electronics, microwave conversion electronics, and antennas for microwave-based “sandwich” module prototypes. The implementation status and testing results of the prototypes are reviewed.     

The dynamics and control of the CubeSail mission: A solar sailing demonstration

The CubeSail mission is a low-cost demonstration of the UltraSail solar sailing concept (, ,  and ), using two near-identical CubeSat satellites to deploy a 260 m-long, 20 m² reflecting film. The two satellites are launched as a unit, detumbled, and separated, with the film unwinding symmetrically from motorized reels. The conformity to the CubeSat specification allows for reduction in launch costs as a secondary payload and utilization of the University of Illinois-developed spacecraft bus. The CubeSail demonstration is the first in a series of increasingly-complex missions aimed at validating several spacecraft subsystems, including attitude determination and control, the separation release unit, reel-based film deployment, as well as the dynamical behavior of the sail and on-orbit solar propulsion. The presented work describes dynamical behavior and control methods used during three main phases of the mission. The three phases include initial detumbling and stabilization using magnetic torque actuators, gravity-gradient-based deployment of the film, and steady-state film deformations in low Earth orbit in the presence of external forces of solar radiation pressure, aerodynamic drag, and gravity-gradient.     

Low-Cost Operation of the ORBCOMM Satellite Constellation

Financial pressures are forcing organizations to minimize operations costs. Although the easiest way to achieve this goal is simply to reduce operational requirements, often this is not possible. Therefore, automation must be employed. This paper discusses the system trade-offs that must be performed to maximize the impact of automation efforts. The discussion begins with the development of generic automation guidelines. Since many automation issues are program-specific, the paper addresses the application of these principles to operation of the ORBCOMM satellite constellation. This example demonstrates how automation can be used to produce a highly efficient satellite operations system.