Subatmospheric decompression: neurological and behavioural studies

Several studies in animals over the past decade have shown that prolonged exposures to pressures within the range 226 mm Hg to 160 mm Hg (30,000 to 37,500 ft) are likely to lead to brain damage. This often results in neurological and behavioural disturbance, which may be subtle and reversible or gross and ultimately fatal. The appearance of these impairments is often delayed until several hours or even days after exposure. Immediate survival does not necessarily ensure recovery. In contrast, decompression to pressures below 160 mm Hg or above 226 mm Hg are unlikely to have adverse effects if the exposure is survived. The most probable outcomes of such decompressions are death or uneventful recovery.     

Steady-state analysis of the constant-frequency clamped seriesresonant converter

A constant-frequency diode-clamped series resonant converter (CFCSRC) is proposed as a solution to problems associated with frequency-controlled resonant converters. This converter has two resonant frequencies, and control is achieved by varying the relative time spent at each switching frequency. Two zero-current-switching (ZCS) modes are examined and plotted in the output plane. An equation is given for the boundary between the two ZCS modes, as well as an expression for the boundary between ZCS and non-ZCS operation; both are plotted in the output plane. The output equation for the main mode is shown to be hyperbolic. Converter peak voltages limited to the input voltages, and peak currents are less than those of the frequency-controlled clamped series resonant converter over a large operating range. Data from a prototype converter are compared with theoretical data and are shown to be in good agreement with the theoretical model     

Calculation of tractive nozzle characteristics with altitude compensation

The numerical calculations of flows in conical and contoured nozzles with slots in the supersonic part that operate under overexpansion conditions are presented. The calculations were made with the aid of the authors’ algorithm and program of simulating turbulent two-dimensional (axisymmetric) flows of a viscous heat-conducting gas. The results of computational investigations of tractive slot nozzle characteristics and the amount of combustion product leakage from an annular slot depending on the flight altitude are given. It is shown that the flight altitude at which the gas flow through the annular slot is “chocked” depends on its size and location in the supersonic nozzle part.     

Technique of integral diagnostics for a radio-frequency inductively coupled plasma discharge unit of an RF ion thruster

A technique of integral diagnostics for an RF inductively coupled plasma gas discharge unit of an ion thruster is proposed. This technique includes a priori measurements of antenna coil electrical parameters in free space and in assembled state as well as experimental determination of the antenna coil currents with and without discharge.     

On Relationship of Flow Swirl Parameters and Gas-Dynamic Efficiency of Gas Turbine Engine Interturbine Transition Duct

The paper highlights significance of the interturbine transition duct as part of the high pressure and low pressure turbine spool. The correlations have been suggested allowing us to estimate variation of the average cross section flow swirl while its passing the interturbine transition duct.     

Programmable, multi-purpose opto-electronic sensor system

Optical fibre sensing is becoming increasingly attractive in both the smart structure sphere of interest as well as the medical and industrial concerns. Fibre-optic interferometric sensors can be designed as compact and robust transducers. In general, the transduction mechanism involves the phase modulation of coherent or monochromatic light propagating through a fibre-optic cable, and detecting the changes in the energy associated with this phase change. Sensors based on this technique can generally be configured to be quite sensitive and measurements of a wide variety of physical parameters are achievable. Intrinsic features of optical fibres, such as immunity to electromagnetic interference, flexibility, thinness, strength and weight, make this ideal for sensor technology. In the process of developing fibre-optic sensors for laboratory experimentation, as well as generalised research, an appropriate, easy to use opto-electronic drive and measurement system is required. This paper discusses the operation of a programmable opto-electronic drive and measurement system     

The Galileo Dust Detector

The Galileo Dust Detector is intended to provide direct observations of dust grains with masses between 10^-19 and 10^-9 kg in interplanetary space and in the Jovian system, to investigate their physical and dynamical properties as functions of the distances to the Sun, to Jupiter and to its satellites, to study its interaction with the Galilean satellites and the Jovian magnetosphere. Surface phenomena of the satellites (like albedo variations), which might be effects of meteoroid impacts will be compared with the dust environment. Electric charges of particulate matter in the magnetosphere and its consequences will be studied; e.g., the effects of the magnetic field on the trajectories of dust particles and fragmentation of particles due to electrostatic disruption. The investigation is performed with an instrument that measures the mass, speed, flight direction and electric charge of individual dust particles. It is a multicoincidence detector with a mass sensitivity 10⁶ times higher than that of previous in-situ experiments which measured dust in the outer solar system. The instrument weighs 4.2 kg, consumes 2.4 W, and has a normal data transmission rate of 24 bits s^-1 in nominal spacecraft tracking mode. On December 29, 1989 the instrument was switched-on. After the instrument had been configured to flight conditions cruise science data collection started immediately. In the period to May 18, 1990 at least 168 dust impacts have been recorded. For 81 of these dust grains masses and impact speeds have been determined. First flux values are given.     

Recursive mode star identification algorithms

Star identification can be accomplished by several different available algorithms that identify the stars observed by a star tracker. However, efficiency and reliability remain key issues and the availability of new active pixel cameras requires new approaches. Two novel algorithms for recursive mode star identification are presented here. The first approach is derived by the spherical polygon search (SP-search) algorithm, it was used to access all the cataloged stars observed by the sensor field-of-view (FOV) and recursively add/remove candidate cataloged stars according to the predicted image motion induced by camera attitude dynamics. Star identification is then accomplished by a star pattern matching technique which identifies the observed stars in the reference catalog. The second method uses star neighborhood information and a catalog neighborhood pointer matrix to access the star catalog. In the recursive star identification process, and under the assumption of "slow" attitude dynamics, only the stars in the neighborhood of previously identified stars are considered for star identification in the succeeding frames. Numerical tests are performed to validate the absolute and relative efficiency of the proposed methods.     

Space storm measurements of the July 2005 solar extreme events from the low corona to the Earth

The Athens Neutron Monitor Data Processing (ANMODAP) Center recorded an unusual Forbush decrease with a sharp enhancement of cosmic ray intensity right after the main phase of the Forbush decrease on 16 July 2005, followed by a second decrease within less than 12 h. This exceptional event is neither a ground level enhancement nor a geomagnetic effect in cosmic rays. It rather appears as the effect of a special structure of interplanetary disturbances originating from a group of coronal mass ejections (CMEs) in the 13–14 July 2005 period. The initiation of the CMEs was accompanied by type IV radio bursts and intense solar flares (SFs) on the west solar limb (AR 786); this group of energetic phenomena appears under the label of Solar Extreme Events of July 2005. We study the characteristics of these events using combined data from Earth (the ARTEMIS IV radioheliograph, the Athens Neutron Monitor (ANMODAP)), space (WIND/WAVES) and data archives. We propose an interpretation of the unusual Forbush profile in terms of a magnetic structure and a succession of interplanetary shocks interacting with the magnetosphere.     

A debris image tracking using optical flow algorithm

This study proposes a motion detection and object tracking technique for GEO debris in a sequence of images. A couple of techniques (called the “stacking method” and “line-identifying technique”) were recently proposed to address the same problem. Although these techniques are effective at detecting the debris position and motion in the image sequences, there are some issues concerned with computational load and assumed debris motion. This study derives a method to estimate motion vectors of objects in image sequence and finally detect the debris locations by using a computer vision technique called an optical flow algorithm. The new method detects these parameters in low computational time in a serial manner, which implies that it has an advantage to track not only linear but also nonlinear motion of GEO debris more easily than the previous methods. The feasibility of the proposed methods is validated using real and synthesized image sequences which contain some typical debris motions.