The failure of marginal detonations in expanding channels

Critical conditions for detonation failure due to tube expansion have been observed in marginal detonations propagating in a in. (6.35 × 76.2 mm) channel. In these experiments, a well established marginal detonation propagating in the narrow channel entered a test section in which one of the narrow walls was inclined to the central axis at positive angles which ranged from 10° to 45°. Experiments were performed at pressures ranging from 60 to 200 torr (8 to 26.7 kPa) in stoichiometric hydrogen-oxygen mixtures diluted with 20, 50 and 70% argon. Smoke track records obtained on the surface which is the major dimension of the tube, were used to determine failure, incipient failure or self-sustenance of the entering wave.Because of the narrow tube used in the studies the incident waves were marginal in that their velocity was below the expected CJ (Chapman-Jouguet) value, their transverse wave spacing was larger than one would see in a large tube, and the transverse waves were of greater strength than in an ordinary detonation. All of these indicators of marginal behavior became progressively more pronounced as the pressure dropped from 200 torr (26.7 kPa) to the limit pressure of approximately 58 torr (7.73 kPa).The most interesting result of this experimental investigation is that the theoretical analyses predicted that simple one-dimensional opening of the tube should not show a pressure dependence to failure, while the experiments showed a definite decrease in the opening angle required for failure as initial pressure decreased. This behavior is related to the marginality of the incident waves, which is observed to increase smoothly with decreased pressure. It is postulated that detonation failure in the hydrogen-oxygen system occurs when the shock velocity at the end of the cell drops to about 0.60 of the CJ value due either to marginal behavior or to an expansion of the cross section of the tube.     

CELSS nutrition system utilizing snails

At the 40th IAF Congress in Malaga, a nutrition system for a lunar base CELSS was presented. A lunar base with a total of eight crew members was envisaged. In this paper, four species of plants--rice, soybean, lettuce and strawberry--were introduced to the system. These plants were sufficient to satisfy fundamental nutritional needs of the crew members. The supply of nutrition from plants and the human nutritional requirements could almost be balanced. Our study revealed that the necessary plant cultivation area per crew member would be nearly 40 m3 in the lunar base. The sources of nutrition considered in the study were energy, sugar, fat, amino acids, inorganic salt and vitamins; however, calcium, vitamin B2, vitamin A and sodium were found to be lacking. Therefore, a subsystem to supply these elements is of considerable value. In this paper, we report on a study for breeding snails and utilizing meat as food. Nutrients supplied from snails are shown to compensate for the above mentioned lacking elements. We evaluate the snail breeder and the associated food supply system as a subsystem of closed ecological life support system.     

The RadioAstron project: Measurements and analysis of basic parameters of space telescope in flight in 2011–2013

The results of a large number of the antenna radiometric measurements at bands of 92, 18, 6.2, 1.35, and 1.7-1.2 cm are presented by the data of the standard telemetry system of the Spektr-R spacecraft. Both special sessions of calibration object observations in the mode of a single space radio telescope (SRT) operation and numerous observations of researched sources in the mode of the ground-space interferometer were used. The obtained results agree with the first results of Kardashev et al. (2013), i.e., within 10–15% at bands of 92, 18, and 6.2 cm and 20–25% at the band of 1.35 cm. In the main, the measurements for the eight subbands at wavelengths of 1.7-1.2 cm indicate a monotonic increase in the spectral system equivalent flux density (SEFD) of noise radiation with a frequency consistent with the calculated estimates for the discussed model. The sensitivity of the ground-space interferometer for the five subbands at wavelengths from 1.35 to 1.7 cm can be higher by a factor of 1.5, and for the three subbands from 1.35 to 1.2 cm lower by a factor of 1.5 than at the band of 1.35 cm. The SRT contribution to the interferometer sensitivity proportional to the square root of SEFD is close to the design one at the bands of 92 and 18 cm and decreases the design sensitivity approximately by a factor of 1.5 and 2 at the bands of 6.2 and 1.35 cm, respectively. These differences of implemented values from the design ones were not significantly affected the scientific program implementation.     

Empirical model of the high-latitude boundary of the Earth’s outer radiation belt at altitudes of up to 1000 km

An empirical model of the high-latitude boundary of the outer Earth’s radiation belt (ERB) has been presented, which is based on the measurement data of electron fluxes on the polar low-orbit CORONAS-Photon, Meteor-M1, and Meteor-M2 satellites. The boundary was determined by a sharp decrease to the background level of the flux of trapped electrons with energies of 100 or 200 keV in the polar part of the profile of the outer radiation belt. A numerical algorithm has been implemented to determine the time moment, when the fastest flux changes are recorded. The primary search was carried out, first, on 30 s averaged data, then repeated on data with a higher resolution. A functional dependence was obtained in order to approximate the obtained set of intersections of the boundary by elliptical curve. The empirical model constructed using the CORONAS-Photon measurement data in the epoch of anomalously low geomagnetic activity reflects the longitude structure of the high-latitude boundary of the outer radiation belt associated with the internal Earth’s magnetic field (MF), as well as its dependence on the universal time. Based on the data of intersections of the high-latitude boundary of the outer ERB (OERB) in the epoch of 2014–2016, the latitudinal shift of the boundary to the equator dependent on geomagnetic activity has been determined, as well as the nightside shift of the boundary due to the diurnal rotation of the Earth.     

Identification of sources of Pc1 geomagnetic pulsations on the basis of proton aurora observations

The relationship between proton aurora and geomagnetic pulsations Pc1, which are an indicator of development of ion-cyclotron instability in the equatorial magnetosphere, are studied on the basis of the observations of proton aurora from the IMAGE satellite, observations of particle fluxes onboard the low-orbiting NOAA satellites, and geomagnetic pulsation observations at the Lovozero observatory. A conclusion is drawn that the subauroral spots in the proton emission projected into the magnetosphere near the plasmapause are two-dimensional images at the ionospheric “screen” of the region of intense scattering of energetic protons into the loss cone at the development of an ion-cyclotron instability.     

Structural health management technologies for inflatable/deployable structures: Integrating sensing and self-healing

Inflatable/deployable structures are under consideration as habitats for future Lunar surface science operations. The use of non-traditional structural materials combined with the need to maintain a safe working environment for extended periods in a harsh environment has led to the consideration of an integrated structural health management system for future habitats, to ensure their integrity. This article describes recent efforts to develop prototype sensing technologies and new self-healing materials that address the unique requirements of habitats comprised mainly of soft goods. A new approach to detecting impact damage is discussed, using addressable flexible capacitive sensing elements and thin film electronics in a matrixed array. Also, the use of passive wireless sensor tags for distributed sensing is discussed, wherein the need for on-board power through batteries or hardwired interconnects is eliminated. Finally, the development of a novel, microencapuslated self-healing elastomer with applications for inflatable/deployable habitats is reviewed.