Research on the Long Lifetime of LEO Remote Sensing Satellites

To increase the efficiency of satellite,reduce the average R&Dcost of satellite,and promote the stable and continuous development of satellite remote sensing application,the main constraints on the     

中国液体运载火箭结构系统发展规划研究

结构系统是运载火箭关键系统之一,对运载效率提升具有显著作用。深入研究了国外运载火箭结构系统发展现状,根据我国运载火箭发展需求,结合我国航天发展和基础工业实际情况,从材料、结构形式、制造工艺等方面,提出了我国运载火箭结构系统重点发展方向和主要关键技术,对提升运载效率和推动航天强国建设具有重要的工程意义。     

Prediction of forming limit curve （FLC） for AI-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve （FLC） of the third generation aluminum-lithium （Al-Li） alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical prediction of the FLC of 2198-T3 is based on the M-K theory utilizing respectively the von Mises, Hill＇48, Hosford and Barlat 89 yield functions, and the different predicted curves due to different yield functions are compared with the experimentally measured FLC of 2198-T3. The results show that though there are differences among the four predicted curves, yet they all agree well with the experimentally measured curve. In the area near the planar strain state, the predicted curves and experimentally measured curve are very close. The predicted curve based on the Hosford yield function is more accurate under the tension-compression strain states described in the left part of the FLC, while the accuracy is better for the predicted curve based on Hill＇48 yield function under the tension-tension strain states shown in the right part.     

Optimization of structural parameters for elliptical cross-section spiral equal-channel extrusion dies based on grey theory

The elliptical cross-section spiral equal-channel extrusion (ECSEE) process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 (45) is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained: u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.     

Wire electrochemical machining with axial electrolyte flushing for titanium alloy

Titanium and its alloys have found very wide application in aerospace due to their excellent characteristics although their processing is still a challenge. Electrochemical machining is an important issue in the fabrication of titanium and titanium alloys. Wire electrochemical machining (WECM) is mainly used for workpiece cutting under the condition of different thickness plates. It has a great advantage over wire electro-discharge machining, which is the absence of heat-affected zone around the cutting area. Moreover, the wire electrode in WECM could be used repetitively because it is not worn out. Thus, much attention has been paid to WECM. The effective way of removing electrolysis products is of importance to WECM. In this paper, the axial electrolyte flushing is presented to WECM for removing electrolysis products and renewing electrolyte. The Taguchi experiment is conducted to optimize the machining parameters, such as wire feedrate, machining voltage, electrolyte concentration, etc. Experimental results show that WECM with axial electrolyte flushing is a promising issue in the fabrication of titanium alloy (TC1). The feasibility of multi-wire electrochemical machining is also demonstrated to improve the machining productivity of WECM.     

中国公务航空如何做大市场?

正无论是从市场的统计数据看,还是从从业者的业务发展看,中国公务航空市场在过去两年复苏迹象明显,呈现进入新一轮高速发展的态势。与2008年前后开启的首轮爆发式快速增长相比,中国公务航空在新一轮发展中显然具备了更好的基础条件。伴随机队规模的扩大和运营商数量的增加,中国的公务机用户群及潜在消费需求也在不断扩大。这既得益     

Raman spectroscopic analysis of a desert cyanobacterium Nostoc sp. in response to UVB radiation

Cyanobacteria are capable of tolerating environmental extremes. To survive in extreme environments, cyanobacteria have developed the capability to adapt to a variety of stresses. For example, cyanobacteria have adopted a number of strategies with which to survive UV stress, including expression of UV-screening pigments and antioxidant systems. We have previously shown that several antioxidants are significantly expressed in Nostoc sp. by UVB irradiation. We report here that the content of UV-responsive biomarkers such as β-carotene and scytonemin can be easily detected by Fourier transform Raman spectroscopy with use of a small sample size and that the content of β-carotene is dependant on the UVB intensity and exposure time. Our results indicate that Raman spectroscopy may be a helpful tool to analyze UV-protective molecules of cyanobacterium in astrobiological studies without access to large sample sizes and complicated extractions, which are needed by other analytical techniques such as high-performance liquid chromatography and mass spectrometry.     

Characteristics of pulsed plasma synthetic jet and its control effect on supersonic flow

The plasma synthetic jet is a novel flow control approach which is currently being studied. In this paper its characteristic and control effect on supersonic flow is investigated both experimentally and numerically. In the experiment, the formation of plasma synthetic jet and its propagation velocity in quiescent air are recorded and calculated with time resolved schlieren method. The jet velocity is up to 100 m/s and no remarkable difference has been found after changing discharge parameters. When applied in Mach 2 supersonic flow, an obvious shockwave can be observed. In the modeling of electrical heating, the arc domain is not defined as an initial condition with fixed temperature or pressure, but a source term with time-varying input power density, which is expected to better describe the influence of heating process. Velocity variation with different heating efficiencies is presented and discussed and a peak velocity of 850 m/s is achieved in still air with heating power density of 5.0 · 1012W/m3. For more details on the interaction between plasma synthetic jet and supersonic flow, the plasma synthetic jet induced shockwave and the disturbances in the boundary layer are numerically researched. All the results have demonstrated the control authority of plasma synthetic jet onto supersonic flow.