Challenges for coring deep permafrost on Earth and Mars

A scientific drilling expedition to the High Lake region of Nunavut, Canada, was recently completed with the goals of collecting samples and delineating gradients in salinity, gas composition, pH, pe, and microbial abundance in a 400 m thick permafrost zone and accessing the underlying pristine subpermafrost brine. With a triple-barrel wireline tool and the use of stringent quality assurance and quality control (QA/QC) protocols, 200 m of frozen, Archean, mafic volcanic rock was collected from the lower boundary that separates the permafrost layer and subpermafrost saline water. Hot water was used to remove cuttings and prevent the drill rods from freezing in place. No cryopegs were detected during penetration through the permafrost. Coring stopped at the 535 m depth, and the drill water was bailed from the hole while saline water replaced it. Within 24 hours, the borehole iced closed at 125 m depth due to vapor condensation from atmospheric moisture and, initially, warm water leaking through the casing, which blocked further access. Preliminary data suggest that the recovered cores contain viable anaerobic microorganisms that are not contaminants even though isotopic analyses of the saline borehole water suggests that it is a residue of the drilling brine used to remove the ice from the upper, older portion of the borehole. Any proposed coring mission to Mars that seeks to access subpermafrost brine will not only require borehole stability but also a means by which to generate substantial heating along the borehole string to prevent closure of the borehole from condensation of water vapor generated by drilling.     

Drilling systems for extraterrestrial subsurface exploration

Drilling consists of 2 processes: breaking the formation with a bit and removing the drilled cuttings. In rotary drilling, rotational speed and weight on bit are used to control drilling, and the optimization of these parameters can markedly improve drilling performance. Although fluids are used for cuttings removal in terrestrial drilling, most planetary drilling systems conduct dry drilling with an auger. Chip removal via water-ice sublimation (when excavating water-ice-bound formations at pressure below the triple point of water) and pneumatic systems are also possible. Pneumatic systems use the gas or vaporization products of a high-density liquid brought from Earth, gas provided by an in situ compressor, or combustion products of a monopropellant. Drill bits can be divided into coring bits, which excavate an annular shaped hole, and full-faced bits. While cylindrical cores are generally superior as scientific samples, and coring drills have better performance characteristics, full-faced bits are simpler systems because the handling of a core requires a very complex robotic mechanism. The greatest constraints to extraterrestrial drilling are (1) the extreme environmental conditions, such as temperature, dust, and pressure; (2) the light-time communications delay, which necessitates highly autonomous systems; and (3) the mission and science constraints, such as mass and power budgets and the types of drilled samples needed for scientific analysis. A classification scheme based on drilling depth is proposed. Each of the 4 depth categories (surface drills, 1-meter class drills, 10-meter class drills, and deep drills) has distinct technological profiles and scientific ramifications.     

Discovery of abundant cellulose microfibers encased in 250 Ma Permian halite: a macromolecular target in the search for life on other planets

In this study, we utilized transmission electron microscopy to examine the contents of fluid inclusions in halite (NaCl) and solid halite crystals collected 650 m below the surface from the Late Permian Salado Formation in southeastern New Mexico (USA). The halite has been isolated from contaminating groundwater since deposition approximately 250 Ma ago. We show that abundant cellulose microfibers are present in the halite and appear remarkably intact. The cellulose is in the form of 5 nm microfibers as well as composite ropes and mats, and was identified by resistance to 0.5 N NaOH treatment and susceptibility to cellulase enzyme treatment. These cellulose microfibers represent the oldest native biological macromolecules to have been directly isolated, examined biochemically, and visualized (without growth or replication) to date. This discovery points to cellulose as an ideal macromolecular target in the search for life on other planets in our Solar System.     

Experiment LEND of the NASA Lunar Reconnaissance Orbiter for high-resolution mapping of neutron emission of the Moon

The scientific objectives of neutron mapping of the Moon are presented as 3 investigation tasks of NASA's Lunar Reconnaissance Orbiter mission. Two tasks focus on mapping hydrogen content over the entire Moon and on testing the presence of water-ice deposits at the bottom of permanently shadowed craters at the lunar poles. The third task corresponds to the determination of neutron contribution to the total radiation dose at an altitude of 50 km above the Moon. We show that the Lunar Exploration Neutron Detector (LEND) will be capable of carrying out all 3 investigations. The design concept of LEND is presented together with results of numerical simulations of the instrument's sensitivity for hydrogen detection. The sensitivity of LEND is shown to be characterized by a hydrogen detection limit of about 100 ppm for a polar reference area with a radius of 5 km. If the presence of ice deposits in polar "cold traps" is confirmed, a unique record of many millions of years of lunar history would be obtained, by which the history of lunar impacts could be discerned from the layers of water ice and dust. Future applications of a LEND-type instrument for Mars orbital observations are also discussed.     

Lunar astrobiology: a review and suggested laboratory equipment

In October of 2005, the European Space Agency (ESA) and Alcatel Alenia Spazio released a "call to academia for innovative concepts and technologies for lunar exploration." In recent years, interest in lunar exploration has increased in numerous space programs around the globe, and the purpose of our study, in response to the ESA call, was to draw on the expertise of researchers and university students to examine science questions and technologies that could support human astrobiology activity on the Moon. In this mini review, we discuss astrobiology science questions of importance for a human presence on the surface of the Moon and we provide a summary of key instrumentation requirements to support a lunar astrobiology laboratory.     

900m~3混响室及其声源的声学特性的工程研究

文章对900 m3混响室及其声源的声学特性进行了实验研究,并用工程方法测试计算了混响时间、声功率以及声源的频率特性,对一些实验结果进行了探讨。根据声压级的衰变量与时间的线性关系,利用突然断开声源的方法计算了混响时间,并由混响时间讨论了参考声源功率谱下混响室谱成形能力问题。分别以混响室法和近似行波场法测算了声功率,指出两种方法的区别与联系。利用近似行波场法,以白噪声信号驱动音头评估了其频率特性。通过实验数据分别探讨了混响室统计频率与号筒声损耗问题,提出“统计频率下限”与号筒声损耗的估算方法。该项工作还有待深入研究。     

Chemical mapping of proterozoic organic matter at submicron spatial resolution

A NanoSIMS ion microprobe was used to map the submicron-scale distributions of carbon, nitrogen, sulfur, silicon, and oxygen in organic microfossils and laminae in a thin section of the approximately 0.85 billion year old Bitter Springs Formation of Australia. The data provide clues about the original chemistry of the microfossils, the silicification process, and the biosignatures of specific microorganisms and microbial communities. Chemical maps of fossil unicells and filaments revealed distinct wall- and sheath-like structures enriched in C, N, and S, consistent with their accepted biological origin. Surprisingly, organic laminae, previously considered to be amorphous, also exhibited filamentous and apparently compressed spheroidal structures defined by strong enrichments in C, N, and S. By analogy to NanoSIMS data from the well-preserved microfossils, these structures were interpreted as being of biological origin, most likely representing densely packed remnants of microbial mats. Given that the preponderance of organic matter in Precambrian sediments is similarly "amorphous," our findings indicate that a re-evaluation of ancient specimens via in situ structural, chemical, and isotopic study is warranted. Our analyses have led us to propose new criteria for assessing the biogenicity of problematic kerogenous materials, and, thus, these criteria can be applied to assessments of poorly preserved or fragmentary organic residues in early Archean sediments and any that might occur in meteorites or other extraterrestrial samples.     

火星等离子体环境探测

萤火一号(YH-1)探测器将对火星空间环境进行独立而深入的探测研究,探测各空间区域的等离子体特性及其对太阳风扰动的响应,以及火星离子逃逸过程,研究太阳风对火星水体损失的影响。为了实现这一目标,萤火一号搭载了等离子体探测包,包括2个离子分析器和1个电子分析器,具有较高的时间分辨率、能量分辨率,可以探测0.02～10 keV的离子、电子,同时能够对粒子的入射方向及1～44 au(1 au=9.1095×10~(-31)kg)质量范围内的离子成分进行分辨。本文阐述了萤火一号等离子体探测的科学意义,并对等离子体包的工作原理,仪器设计进行了介绍。     

供测量高阻率材料电压、电流和电阻用的前置放大器

本文介绍一种供测量高阻率材料直流电压、电流和电阻用的前置放大器,其测量范围分别为:电压:30μv～10v;电流:10~(-2)～10~(-13)A;电阻:10~3～10~(13)Ω。若在反馈回路中接入适当的电容器还可测量电荷。本前置放大器采用市场上供应的运算放大器制成,其体积较小,并可与市场上大量供应的电压表或记录器联合使用,适用于无定形的(非晶体的)半导体薄膜电气性能的就地测量。     

边界层转捩过程三维扰动的发展和演化

引入展向调制的二维人工扰动激发平板边界层转捩,利用水槽氢气泡流动显示技术观察到转捩边界层中典型三维扰动的产生和发展,包括Λ结构、发卡涡以及发卡涡演化生成环状涡的过程.实验结果显示出环状涡和尖峰结构的关系,直接证实了尖峰结构的产生机理.在流动紊乱化初始阶段发现常出现在湍流边界层中的暗斑结构,结果表明与暗斑相伴随的局部高剪切层不稳定可能是流动紊乱化的重要原因.