评定运载火箭成本的TRANSCOST模型及其应用

首先介绍评定运载火箭的研制和发射成本的解析模型的结构,着重讨论评定使用成本的新方法,并引入众多参数来修正模型.尔后以“阿里安”4后继型为例,讨论用于未来系统分析和成本比较的模型,分析了采用10种不同方案的可贮低温燃料两级火箭的研制和发射成本.欧洲未来运载火箭系统的关键是要最佳解决有限的研制费用与期望的最低发射成本之间的矛盾.多次使用系统能使发射成本大为降低,但研制费用较大.基于实际参数的成本解析模型能为选择运载火箭方案提供重要的信息.     

基于高分卫星姿态监测的姿态参数算法优化

目前航天测绘相机几何参数的在轨标定通常经由地面检校场数据处理完成。然而,由于一次摄影中难以保证获取的地面检校场影像完整,使得在轨标定周期较长,进而导致实时监测与标定非常困难。“高分十四号”卫星搭载了一种新的姿态测定系统,利用高精度的相机光轴监测实现对相机几何参数的在轨实时标定。文章在此基础上对高分卫星星地相机间夹角在轨解算方案进行了优化,并基于数值仿真和在轨实测数据进行了分析,结果显示优化算法可以进一步提高影像内定向稳定度和最终的定位精度,未来有望在高精度立体测绘应用中发挥重要作用。     

Magnetic Field Fluctuations in the Solar Wind, Foreshock and Magnetosheath： Cluster Data Analysis

46 magnetosheath crossing events from the two years (2001.2-2003.1) of Cluster magnetic field measurements are identified and used to investigate the characters of the magnetic field fluctuations in the regions of undisturbed solar wind, foreshock, magnetosheath. The preliminary results indicate the properties of the plasma turbulence in the magnetosheath are strongly controlled by IMF orientation with respect to the bow shock normal. The amplitude of the magnetic field magnitude and direction variations behind quasi-parallel bow shock are larger than those behind quasi-perpendicular bow shock. Almost purely compressional waves are found in quasi-perpendicular magnetosheath.     

Structure of the Program of Short-term Prediction of Powerful Solar Flares

Input data of the system are two-dimensional images and one-dimensional distributions of total and polarized solar emission at 5.2 cm wavelength obtained with SSRT. Together with photoheliograms, magnetograms, Hα-filtergrams and characteristics of active regions received from other sources, they form the initial database. The first stage includes superimposing the images, identifying microwave sources with active regions, assigning NOAA numbers to the sources, and determining for each active region the heliolatitude, extent, and inclination angle of the group's axis to the equator. These data are used to calculate the boundaries of longitude zones for each active region. A next stage involves determining the brightness temperatures of microwave sources less than the polarization distribution, the degree of polarization, and microwave emission flux, as well as calculating the parameters of microwave sources. Each parameter is assigned its own value of the weight factor, and the sum of values is used to draw the conclusion about the flare occurrence probability in each active region and on the Sun in general.      

密集型空气雾化流场破碎特征数学模型研究

低速液体射流在高速湍流气体作用下的气液同轴射流雾化流场是瞬态密集型喷雾场,高速湍流中影响和控制雾化的因素很多。针对空气雾化流场液核分布与特征进行分析,开发了模拟液核的随机浸入体模型,结合大涡模拟方法对同轴射流空气雾化喷嘴下游流场进行数值模拟。模拟结果与实验结果对比表明：随机浸入体模型可快速捕捉液核的长度和位置信息。当气液动量比M为3~10000时,能够较准确地预测液核长度,当M>10时,其预测结果远优于唯象模型;该模型能够捕捉回流区、大尺度涡等流场结构。同时,可以准确地预测喷嘴附近的液滴粒径,特别是在气流速度较大（>60m/s）时,液滴平均直径预测误差<10%。     

特种加工技术在某新型微叠层复合材料中的应用

目前航空航天领域采用的微叠层复合材料主要集中在Fe、Ni、Ti和Al的合金或金属间化合物上。这类金属的金属间化合物具有熔点高、密度低、热导率好及抗高温性能好等优点,可被用作航空飞行器或航空发动机的高温结构材料。但是这类金属间化合物具有其本征脆性,导致其室温下的断裂韧性很差,因而应用受到限制。为解决这一问题,采用特种加工技术制备出具备微叠层结构的金属/金属间化合物复合材料是理想的手段之一。     

Observations of Magnetic Reconnection in the Magnetotail Associated With Substorms

Magnetic reconnection is one of the most important, dynamic phenomena in the magnetotail in terms of magnetic field line configuration change and energy release. It is believed to occur in the distant magnetotail mainly during southward interplanetary magnetic field periods and in the near-Earth magnetotail in association with substorms. In the present paper, we discuss several important issues concerning magnetic reconnection in the magnetotail associated with substorms, such as reconnection signatures, location, timing, spatial scale, and behavior, from the macroscopic, observational point of view.      

先进战斗机纵向飞行特性与放宽静稳定度研究

放宽静稳定度在先进战斗机设计领域已获得广泛应用,与其相关的主动控制技术仍有进一步研究的价值,需要对放宽静稳定度对飞机纵向飞行性能的影响进行更全面的分析。以重心后移作为放宽静稳定度的方式,分析放宽静稳定度与某型战斗机俯仰力矩系数的关系,构建战斗机非线性模型并进行开环特性分析,在此基础上,分析放宽静稳定度对飞机运行平衡点的影响机理,对战斗机非线性模型进行线性化,并分析放宽静稳定度对飞机纵向线性模型阶跃响应特性和长短周期模态特性的影响。结果表明：放宽静稳定度可增大战斗机的俯仰力矩系数,提高飞机性能,但可能会使飞机本体模态特性变差,需要在设计控制率时予以考虑。     

Computational aerodynamic analysis on perimeter reinforced （PR）-compliant wing

Abstract Implementing the morphing technique on a micro air vehicle （MAV） wing is a very chal- lenging task, due to the MAWs wing size limitation and the complex morphing mechanism. As a result, understanding aerodynamic characteristics and flow configurations, subject to wing structure deformation of a morphing wing MAV has remained obstructed. Thus, this paper presents the investigation of structural deformation, aerodynamics performance and flow formation on a pro- posed twist morphing MAV wing design named perimeter reinforced （PR）-compliant wing. The numerical simulation of two-way fluid structure interaction （FSI） investigation consist of a quasi- static aeroelastic structural analysis coupled with 3D incompressible Reynolds-averaged Navier- Stokes and shear-stress-transport （RANS-SST） solver utilized throughout this study. Verification of numerical method on a rigid rectangular wing achieves a good correlation with available exper- imental results. A comparative aeroelastic study between PR-compliant to PR and rigid wing per- formance is organized to elucidate the morphing wing performances. Structural deformation results show that PR-compliant wing is able to alter the wing＇s geometric twist characteristic, which has directly influenced both the overall aerodynamic performance and flow structure behavior. Despite the superior lift performance result, PR-compliant wing also suffers from massive drag penalty, which has consequently affected the wing efficiency in general. Based on vortices investigation, the results reveal the connection between these aerodynamic performances with vortices formation on PR-comoliant wing.     

边界层对可调节进气道性能的影响

给出了马赫数2-6、单位雷诺数（0．8-6．0）×10^7／m时下吹式风洞中可调节三维进气道的试验研究结果。研究了前缘前掠和后掠方案以及进气道人口前边界层的影响。测量了内流道内的压力分布、质量流量和总压恢复系数;确定了进气道启动与马赫数和流动工况的关系。研究结果表明：边界层对流场结构和模型进气道的性能有着决定性影响,相对简单的进气道调节方案可以增大其稳定运行范围。