水洞动态测力和流动显示一体化实验技术

研制能够用于低速水流中的三分量内式测力天平,结合氢气泡(或染色液)方法,在水洞(槽)中实现测力和流动显示实验同步进行的动态实验系统,克服了通常测力和流动显示分别在风洞和水洞中进行,实验条件不同给结果分析带来的困难。天平采用高精度位移传感器,避开传统的应变片技术应用于水中所遇到的技术困难。简易飞行器模型的静态和等速俯仰实验结果表明了测量系统的可靠性。     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

基于光纤F-P可调谐滤波器的有害气体检测方法

光谱分析法在气体成分监测领域有着广泛的应用,实现小型紧凑高分辨率的光谱测量装置是热门的研究课题。文章创造性的提出了基于光纤法布里-帕罗（F—P）的可调谐滤波器提高吸收光谱分辨率,为构建紧凑高分辨率的光谱仪提供了一种新的方案。基于光纤F-P的可调谐滤波器成功实现了微型光栅光谱仪（分辨率约1nm）对甲烷吸收光谱的测量,对比无光纤F—P可调谐滤波器直接测量的结果,该方法测得的吸收光谱强度至少提高了一个数量级。此研究成果可用于紧凑高分辨率的星载气体检测仪的研制。     

有人无人直升机协同搜潜效能研究

通过分析直升机搜潜的任务过程,结合蒙特卡洛法的随机抽样特性,建立了基于蒙特卡洛法的效能 评估模型,用以评估直升机使用浮标搜潜的成功概率。基于仿真实验对有人直升机搜潜、无人直升机双机编组 搜潜、有无人直升机协同搜潜的效能进行了对比分析。     

双组元统一推进系统优化改进技术进展

不断提高推进剂在轨管理效率,是应用卫星对推进系统的基本要求,也是推进系统的重要发展方向。推进剂剩余量在轨高精度测量和并联贮箱均衡排放主动控制,是提高推进剂在轨管理效率的重要技术手段。针对我国SAST-5000卫星平台双组元统一推进系统,开展了气体注入压力激励方法的关键技术攻关,并取得重要进展。研究结果表明：改良型气体注入压力激励法的推进剂剩余量在轨测量精度达到-0.68%-0.66%,并联贮箱均衡排放控制措施将被动调节的不均衡度控制在优于1.13%,主动纠偏措施还可进一步提高并联贮箱排放推进剂的同步性。     

PLC在发射控制系统中的可靠性应用研究

基于PLC(可编程逻辑控制器)的发射控制系统冗余技术在运载火箭地面测试发射控制系统中有着广泛的应用。现有运载火箭大多采用并联PLC发射控制方式来提高发射的可靠性,在实际发射中取得了一定的成功。但此方式本身存在着一定影响可靠性的潜在问题,一些问题会导致发射的推迟。本文从现有PLC发射控制系统存在的问题入手,提出几种替代的冗余架构解决方案,以可靠度计算数学模型为基础,对各种冗余方式进行可靠性和系统平均寿命的评估与分析,得出可靠性与系统平均寿命综合结果最优的冗余系统架构,对PLC在运载火箭发射控制系统中的应用具有指导意义。     

空间相机电子设备热设计

电子设备是空间相机重要发热源,需要通过合理的热设计将热量及时导走,维持电子元器件温度不致过高。根据空间相机各电子设备所处空间环境、结构特点及内部电子元器件热特性,提出了相应的多种不同的热设计方法,采用热仿真分析、热平衡试验两种方法对设计进行了验证,对比了两种方法所获取的温度数据。结果表明两种方法所获取元器件结温均满足温度降额指标要求,且相差不大,充分验证了热设计方案的有效性和仿真分析的准确性。     

“高分四号”卫星凝视相机的技术特点

"高分四号"卫星凝视相机具有高时间分辨率、较高空间分辨率和较大成像幅宽的特点。它包含可见光近红外(VNIR)通道和中波红外(MWIR)通道,VNIR通道有5个谱段,MWIR通道有1个谱段,具备昼夜成像能力。相机光学系统为折反射系统,采用分色片实现VNIR与MWIR谱段分离,利用旋转滤光轮将入射VNIR辐射分成5个谱段。VNIR焦面组件采用全局电子快门CMOS面阵探测器;MWIR焦面采用HgCdTe面阵探测器,由脉冲管制冷机制冷到80K。MWIR谱段采用两个黑体进行星上定标。基于用户需求和地球静止轨道环境开展了相机与卫星平台一体化设计、光学系统力学和热学稳定性设计、微振动抑制设计、活动机构长寿命高可靠性设计。     

雷诺数对涡扇发动机性能及稳定性影响

综合了Wassell方法和经验数学模型两种雷诺数修正方法,对风扇、压气机、高低压涡轮的部件特性进行了雷诺数修正。运用修正后的部件特性分别对3种涡扇发动机进行了性能计算,定量计算出了雷诺数对涡扇发动机性能的影响程度。计算结果表明:在低空区雷诺数对涡扇发动机性能和稳定性影响可以忽略不计;但在高空低速区,雷诺数对涡扇发动机性能和稳定性影响显著;涡轮前总温剧烈升高;推力增大3%～6%、耗油率增大8%～10%;稳定裕度下降19%～39%。因此在高空低速区航空发动机性能数值模拟必须考虑部件特性雷诺数的影响。