Evaluation and analysis on positioning performance of BDS/QZSS satellite navigation systems in Asian-Pacific region

By using the observation data and products of precise obit and clock offset from Multi-GNSS Experiment (MGEX) of the International GNSS Service (IGS) and GNSS Research Centre, Curtin University in this paper, the positioning performance of BDS/QZSS satellite navigation system has been analyzed and evaluated in aspects of the quantity of visible satellites, DOP value, multipath effect, signal-to-noise ratio, static PPP and kinematic PPP. The analysis results show that compared to BDS single system when the cutoff angle are 30°and 40°, the DOP value of BDS/QZSS combined system has decreased above 20%, and the quantity of visible satellites increased about 16–30% respectively, because of the improved spatial geometric configuration. The magnitude of satellite multipath effect of BDS system shows the trend of MEO?>?IGSO?>?GEO, which is consistent with that of QZSS satellite system, as the constellation structure of the two systems is similar. The variation tendencies of signal-to-noise ratio with respect to elevation angle of the two systems are almost the same at all frequencies, showing that at the same elevation angle the signal-to-noise ratio of MEO satellites is higher than that of IGSO satellites, as the higher obit is the lower transmitting power is obtained. For having a specially designed obit, the variation of signal-to-noise ratio of BDS system is more stable. However, the magnitude of signal-to-noise ratio of QZSS system appears the trend of frequency 3?>?frequency 2?>?frequency 1. The static PPP performance of the BDS/QZSS combination system has been improved more significantly than the BDS single system in E, N and U directions. When the cutoff angle are at 7°, 15° and 30°, the PPP accuracy is increased about 25–34% in U direction, 10–13% and 23–34% in E and N directions respectively. When the elevation angle is large (40°), compared to BDS single system at lower elevation angles (7° and 15°) the PPP accuracy of the BDS/QZSS combination system is improved above 30% in U direction. In kinematic PPP performance, compared to BDS single system, the accuracy, availability and reliability of the BDS/QZSS combination system has been improved too, especially at large elevation angles (30° and 40°), the kinematic PPP accuracy in E and U directions has been improved about 10–50%, and above 50% in U direction. It can be concluded that the combination with QZSS system can improve the positioning accuracy, reliability and stability of BDS system. In the future, with the improvement of the satellite construction of Japan’s QZSS system and the global networking of China’s BDS satellites, the QZSS satellites will contribute greatly to improve the positioning accuracy, reliability, availability and stability of GNSS systems in areas such as cities, mountains, densely-packed buildings and severely covered areas in Asian-Pacific region.     

微米级自动扫描磨粒形态分析仪运动系统的设计及制造

介绍了自动扫描磨粒形态分析仪运动系统的设计、关键技术的解决途径及制造过程中的关键工艺问题的研究成果．     

发射圆轨道卫星运载火箭的制导

圆轨道卫星偏心率的一阶偏导数在入轨点不存在,因此,给我们沿用以往的线性偏导数制导理论造成了困难。经过研究简捷地找到了圆轨道卫星偏心率偏差的毕达哥拉斯公式,解决了发射圆轨道卫星制导问题,并给出了通过调整发动机关机时间和末级飞行程序来达到设计时需要的圆轨道的标准指标公式。     

人体热调节系统中血液换热的数值研究

在总结以往人体热调节系统数学模型的基础上，提出了人体热调节系统中的血液换热模型，并对人体生物热方程作了改进，经改进后的人体热调节系统数学模型具有更好的计算精度，其计算结果与实验实测值吻合良好。     

发动机滑油检查专家系统的面向对象实现(英文)

对发动机滑油的检查能够给出发动机内部状况的指示.运用面向对象程序设计技术(OOP),本文开发了一个滑油检查专家系统.基于微软基础类库(MFC),该专家系统将知识库、推理机和人机界面加以重构并形成一体.为验证该专家系统,文末还给出了一个检查的例子.     

麻花钻双曲面刃磨的数学模型及参数计算方法

介绍了以回转双曲面作为麻花钻后刀面的数学模型 ,设计参数与刃磨参数的关系。针对该钻型的特点 ,提出用钻尖主刃的外缘和横刃转点处的锋角作为其设计参数值。并以尾隙角为补充参数 ,惟一地确定钻尖的刃磨参数。给出了该钻型设计参数与刃磨参数之间的函数关系式 ,为双曲面麻花钻型的设计和刃磨提供了一定的理论基础。     

无尾飞翼气动布局是UCAV总体设计的最佳选择

从我国UCAV使用要求(作战模式)出发，分析了四个突出的设计特点，并且阐述了无尾飞翼气动布局的固有优势，最后得出无尾飞翼气动布局是我国UCAV总体设计方案的最佳选择。同时分析了无尾飞翼气动布局的主要问题及其解决途径，设计思想符合航空飞行器设计规律。     

2009年7月22日日全食期间电离层总电子含量变化研究

利用中国区域内五个GPS台站(一个台站处于日全食区域、四个台站处于日偏食区域)观测数据, 研究2009年7月22日日全食期间电离层总电子含量(TEC)的变化, 结果表明, 日全食期间, 电离层TEC值经历了下降和恢复的过程, 最小TEC相对于最大食偏的时间延迟约为1～10min; 台站测得最小TEC的星下点(IPP)越靠近日全食带TEC下降量越大, 在日食期间武汉站(114.35°E, 30.53°N) TEC相对于各参考日期的TEC, 其平均下降量最大, 达到4.58TECU.      

离子发动机羽流特性的数值模拟

离子发动机羽流中产生的交换电荷(CEX)离子返流会影响航天器的正常工作.建立离子发动机羽流模型,采用单元内粒子方法(PIC)对羽流场进行数值模拟计算.结合DS-1探测器飞行实验的测量结果,分析了卫星电势、电子温度、卫星几何尺寸、推力器工作特性等对相关因素对CEX离子返流特性的影响.结果表明:从推力器出口附近到卫星背面,CEX离子密度为108~1012m-3.当卫星电势从-15V变化到27V,测量点位置处CEX离子密度从0.65×1012m-3变化到1.5×1012m-3.羽流中CEX离子密度和电势结构随电子温度变化不大,但电势大小随电子温度成比例地变化.同一位置处不同工况下CEX离子的密度可根据CEX离子生成率与工作点参数间的关系式准确地估计.卫星安装推力器的表面起着对CEX离子返流屏蔽和降低的作用.      

碰摩故障静电监测方法及模拟实验

针对航空发动机叶片碰摩故障难以实现在线监测的问题,展开基于静电感应原理的碰摩故障监测新方法研究。分析了碰摩颗粒产生与荷电机理,以静电传感器理论和点电荷感应信号特征为依据,建立了周期碰摩静电感应理论模型。研究结果表明:周期碰摩在静电传感器上的输出是一系列以碰摩频率为间隔的随频率增大幅值迅速衰减的周期离散谱线。为了验证模型的正确性,利用自行研制的静电传感器,采用模拟碰摩的方式进行了两组实验。第1组实验结果表明传感器可以监测到模拟碰摩故障产生的带电颗粒,碰摩阶段的信号活动率水平明显增大,但事件率没有出现明显的变化;第2组实验在信号频域出现了非常明显的特征频率及其二倍频,且二倍幅值频随频率增大迅速衰减,证明了模型的有效性。