多视场星敏感器结构参数标定方法

提出一种基于星间角距不变原理的多视场(FOV)星敏感器结构参数标定方法.这种方法以欧拉角表征多视场星敏感器各个子视场之间的旋转关系,利用识别得到的各个视场星点的坐标信息和赤经赤纬信息,计算出多对星光矢量来建立标定模型和目标函数,然后使用L-M算法优化目标函数并解算出各个子视场之间的结构参数.此方法不需要外部姿态测量仪器辅助,可用于在轨和地面标定.在全天球随机抽取多个姿态生成多视场的仿真星图用于标定,并采用星内角统计偏差作为结构参数标定精度的评价指标.这种方法能够准确求解多视场星敏感器的结构参数.星内角统计偏差的平均值在星点位置噪声标准差为0.1像素的仿真试验中为1.3",在外场观星的实际试验中为6.4".      

自动铺丝用预浸丝制备工艺研究

针对预浸料特点,提出平刀与圆刀2种分切刀具形式。以分切预浸丝束宽度与边缘质量为评价标准,对比了2种刀具形式对预浸料的分切质量,研究了刀具形式、工艺参数对分切质量的影响。结果显示,由于平刀刀片薄,弯曲模量低,易发生弯曲变形,所得预浸丝束宽度稳定性差;同时,由于刃口始终固定、散热性能差,分切过程中刃口处容易发生树脂堆积,使刀片钝化,影响丝束边缘质量,无法实现对预浸料进行高质量连续式分切。而圆刀分切时,由于刀片旋转,刃口不断变化;独特的刀具形式,降低了刀片在分切过程中的侧向移动,使得圆刀分切能够获得宽度均匀,边缘质量良好的自动铺丝用预浸丝束。     

软件故障树分析实例研究

软件故障树分析(SFTA)是硬件或系统FTA的扩展,可应用于安全性关键软件的验证和可靠性分析.本文首先阐述了SFTA的原理和应用过程,然后介绍了结合某嵌入式软件进行实际应用的过程以及最小割集的生成,并在此基础上提出了对该软件的改进建议.     

浅析重庆机场雷暴天气条件下的塔台管制指挥

重庆江北机场周围的地形复杂、空域有限,每年的3月至10月份是雷暴天气的频发期。本文以重庆空管分局塔台管制室的实际运行程序为基础,提出了一些在雷暴天气条件下管制指挥建议,在提高运行效率、降低管制运行风险等方面能起到较大作用。     

风洞模型-支撑系统涡激振动测量与分析

以0.55m×0.4m低湍流航空声学风洞某模型及其支撑系统为研究对象,采用基于加速度传感器直接测量支撑系统和热线间接测量模型尾流相结合的方法,测量并分析了风洞模型-支撑系统的涡激振动模态,给出了测量方案和数据处理方法。采用基于加速度传感器的功率谱分析方法,获得了模型-支撑系统的三阶振动频率分别为31.1、120.9和221.4Hz;采用基于加速度传感器的频域滤波和频域积分方法,提高了有效信号的信噪比,获得了模型-支撑系统振动的振型和振动节点位置;采用热线测量模型尾流分离涡脱落频率的方法,获得了模型一阶和二阶振动的尾流涡激频率分别为31.1和124.1 Hz,并从测量尾流速度脉动量获得了模型振幅变化和抖振边界信息。实验结果表明,采用热线测量模型尾流从而分析模型振动的方法,有利于小尺度的模型振动测量,而且相对于加速度传感器装于模型表面的直接测量方法而言,对试验模型的绕流流场干扰较小,为测量风洞试验模型的涡激振动模态提供了一种方法。     

Fractional order tension control for stable and fast tethered satellite retrieval

The retrieval of a tethered satellite system is intrinsically unstable. This paper develops a new control strategy to retrieve the tethered satellite system stably and quickly using the fractional order control theory. The governing equation of the tethered satellite system and classic linear feedback tension control law were first reviewed and examined as a benchmark. Then, a new fractional order tension control law has been to avoid the tethered satellite winds around the main satellite near the end of retrieval by existing integer order tension control laws. The newly proposed control law has been discretized and implemented by the Laplace transform and Tustin operator. Unlike the existing integer order control laws, which are based on the feedback of current state and memoryless, the fractional order control law has the memory of previous states and thus controls the tether retrieval more smoothly while maintaining the retrieving speed. The effectiveness and advantage of the new fractional order tension control law is demonstrated numerically by comparing with its integer order counterpart. The results show that the new control law not only retrieves the subsatellite without winding around the main satellite, but also provides a better control performance with smaller in-plane libration angles.     

An innovative navigation scheme of powered descent phase for Mars pinpoint landing

Pinpoint landing (within 100 m from the target) is essential for future Mars exploration missions. This paper deals with one aspect of the pinpoint landing architecture—the navigation performance improvement during the powered descent phase, and proposes an innovative navigation scheme to obtain the vehicle complete and accurate states. On the basis of dead reckoning relying on the Inertial Measurement Unit, measurements of the Integrated Doppler Radar are adopted to correct the vehicle velocity and altitude. Distance between the vehicle and one Mars Orbiter as well as their line-of-sight relative velocity is measured by a radio sensor, and integrated in the filter to correct the vehicle horizontal position. The innovative navigation system is based on an Extend Kalman Filter. Two observation schemes are developed. One considers measurements of the Integrated Doppler Radar and radio range measurement. Another further considers radio velocity measurement. The performance of the innovative navigation scheme is greatly influenced by the position of the Mars Orbiter with respect to the target. Stochastic analyses are performed to obtain optimal locations of Mars Orbiter. Finally, the innovative navigation scheme performances are assessed through stochastic simulations. Its performance improvements are demonstrated by comparison with the Integrated Doppler Radar only navigation scheme.     

脉压雷达旁瓣匿影工作模式与抗干扰性能分析

旁瓣匿影是脉冲压缩雷达中常用的抗干扰技术。首先基于旁瓣匿影的一般结构,构建了脉压前匿影与脉压后匿影两种工作模式。然后重点针对不同工作模式下的雷达抗干扰性能和检测性能进行了理论分析和仿真研究。结果表明,脉压前匿影比较适合对抗压制性脉冲干扰,而脉压后匿影则更适合对抗欺骗性脉冲干扰。     

摄影测量技术及其在航天器变形测量中的应用

文章介绍了摄影测量技术的测量原理,系统调研了近年来摄影测量技术在国内外航天器变形测量领域的发展概况,分析总结了该技术的发展趋势和关键技术,并结合我国的具体国情提出了当前变形测量技术发展的建议,为我国在航天器大型复杂部件微变形测量技术的发展提供借鉴和参考。     

Study on O2 generation and CO2 absorption capability of four co-cultured salad plants in an enclosed system

The ability to generate O₂ and absorb CO₂ of several co-cultured vegetable plants in an enclosed system was studied to provide theoretical reference for the future man-plant integrated tests. Four kinds of salad plants (Lactuca sativa L. var. Dasusheng, Lactuca sativa L. var. Youmaicai, Gynura bicolor and Cichorium endivia L.) were grown in the CELSS Integration Test Platform (CITP). The environmental factors including O₂ and CO₂ concentration were continuously monitored on-line and the plant biomass was measured at the end of the test. The changing rules of O₂ and CO₂ concentration in the system were basically understood and it was found that the O₂ generated by the plants could satisfy the respiratory needs of 1.75 persons by calculation. It was also found that the plants could absorb the CO₂ breathed out by 2 persons when the light intensity was raised to 550 mmol m⁻² s⁻¹ PPF. The results showed that the co-cultured plants hold good compatibility and excellent O₂-generating and CO₂-absorbing capability. They could also supply some fresh edible vegetable for a 2-person crew.