航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

《实用英语》教法研究新思路

本文主要阐明了教师在教授《实用英语》的过程中，应更多地寻找新思路，探求新方法，创造性地使用教材，以交际法为主线，博采众长，为我所用。根椐各流派教法，结合《实用英语》，作者着重讲述了如何灵活安排教学计划，提出课堂教学中切实可行的方法。     

强化实践教学与管理 提高实践质量与效果

本文以《模拟电路》及相关实验为例，分析了实践性教学的现状，找出了实践性教学中存在的问题。最后针对所存在的问题，提出了几点改进措施，以期达到提高实践质量与效果的目的。     

轴对称横向喷流强干扰流场的巨型机向量并行计算

本文在国产巨型计算机ＹＨ－１和ＹＨ－２上对ＭａｃＣｏｒｍａｃｋ显格式解轴对称横向喷流强干扰流场的计算程序进行了重构和向量优化使其能并行执行。得到该程序在ＹＨ－１上的向量加速比约为６．０，ＹＨ－２单机向量运行速度约为ＹＨ－１上的向量运行速度的３倍。与传统的串行计算相比较，并行计算大大缩短了程序运行的ＣＰＵ时间。     

ZN3火箭姿态测量用太阳角计

本文给出了用于ＺＮ３火箭姿态测量太阳角计的原理和测量结果，讨论了背景抑制和标定方法，分析了误差来源。该仪器采用选取适当探测波段和比值测量方法较好地消除了地外太阳辐照和大气消光的影响，也有效地抑制了背景辐射的干扰，大大提高了测量精度。实测结果表明，火箭姿态角测量的均方根误差约为０．７°。这一方法适用于各种自旋稳定飞行器的姿态测量。     

固体发动机喷管烧蚀和温度场测量

介绍了含铝复合推进剂发动机试验时,对其喷管进行的烧蚀和温度场测量,获得了复合喷管结构中的烧蚀和瞬时温度分布.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

International cooperation in space — new opportunities, new approaches : An assessment

Now that the Cold War is over, the authors of this Viewpoint believe that in the interests of the USA as well as the rest of the world international cooperation should become a more fundamental element of US space policy. Cooperative agreements will not always be easy to reach and will require creative statecraft. To that end the USA should take the initiative in establishing a high-level international policy forum to facilitate discussions on the main goals and objectives to be served by international cooperation in space.     

TA15钛合金自动TIG焊工艺试验研究

探讨了TA15钛合金自动氩弧焊接工艺,采用恒流TIG焊和脉冲TIG焊,通过无损检测、力学性能试验等手段,分析了工艺参数对接头性能的影响。试验表明,TA15钛合金自动氩弧焊,焊缝外观、内部质量良好,接头抗拉强度达到基体的90%以上,且具有良好的韧性。