红外气体分析中环境影响的补偿方法研究

环境温度、总压影响是红外气体分析中难以有效解决的主要问题之一，本文以二氧化碳气体为测量对象，采用实验手段，单片机和数据自理技术建立了环境温度、总压对红上气体分析影响的补偿数学模型和求解方法，并进行了实验验证，研究的内容为红外气体分析中影响影响的外补偿开始辟了一条新的途径，具有广阔的应用前景。     

后掠叶栅发声机理的研究

本文研究了后掠叶栅的发声机理,并给出了相应的声压、声功率的计算公式。文中还讨论了转子尾流与后掠静子相互作用的干涉噪声随后掠角的变化规律,结果表明合理地选择后掠角将对干涉噪声的大小产生重要的影响。     

一种获取耀斑光变曲线的高精度,高分辨方法

一种获取耀斑光变曲线的高精度、高分辨方法栗志，周卫红（中国科学院云南天文台，昆明６５００１１）关键词太阳耀斑，光变曲线，测量方法太阳耀斑物理机制的研究，需要得到耀斑核的辐射的演化，在光学波段常用耀斑在单色光的辐射强度的时间变化曲线作为分析依据［１］．...     

对巡航导弹撞地有关因素的仿真研究

研究了巡航导弹低空地形跟踪飞行的撞地概率问题，针对地形随机输入和低空风随机干扰共同作用的情况，研究了撞地概率的仿真计算方法，在给定条件下求出了它们与撞地概率的关系曲线，分析了它们对撞地概率的影响，从中可以看出，协调参数，能有效降低撞地概率，提高巡航导弹的作战效能。     

传输型光学遥感器斜模式采样新方法研究

文章介绍了实现超模式采样焦平面3种解决方案面临的技术难点,为避开器件问题提出了一 种新的斜模式采样方法。以任意两雏周期采样理论为基础分析了斜模式采样技术的物理原理,并通过实验 手段验证了斜模式采样技术的可行性。试验结果表明:改变探测器推扫方向的采样间距,斜模式采样技术 可以提高传输型光学遥感器图像的空间分辨率,该技术相对于超模式采样技术,工程实现上要简单。     

Intelligent Silent Zone for Source-Location Privacy Based on Context-Awareness in WSNs

In many wireless sensor networks(WSNs)applications,the preservation of source-location privacy plays a critical role in concealing context information,otherwise the monitored entities or subjects may be put in danger.Many traditional solutions have been proposed based on the creation of random routes,such as random walk and fake sources approach,which will lead to serious packet delay and high energy consumption.Instead of applying the routing in a blind way,this article proposes a novel solution for source location privacy in WSNs by utilizing sensor ability of perceiving the presence a mobile attacker nearby,for patient attackers in particular to increase the safety period and decrease the data delivery delay.The proposed strategy forms an intelligent silent zone(ISZ)by sacrificing only a minority of sensor nodes to entice patient attackers away from real packet routing path.The analysis and simulation results show that the proposed scheme,besides providing source location privacy energy efficiently,can significantly reduce real event reporting latency compared with the existing approaches.     

学部制下提升高校学生核心就业能力的有效途径研究

高校学部制下办学,可以更广领域和更宽视野来审视我们的高校专业教育,既要考虑社会的现实需求,也要考虑未来社会对人才的要求;既要考虑学生的就业,也要兼顾学生发展潜力和应对未来世界挑战的核心竞争能力。在学部制办学背景下,探讨如何利用学部优势,提升包括大学生学习能力、创新能力上岗能力等核心就业能力,全方位的培养具有复合型知识结构和能力结构,核心竞争力强的厚基础、宽口径复合型人才。     

Motion prediction of a non-cooperative space target

Capturing a non-cooperative space target is a tremendously challenging research topic. Effective acquisition of motion information of the space target is the premise to realize target capture. In this paper, motion prediction of a free-floating non-cooperative target in space is studied and a motion prediction algorithm is proposed. In order to predict the motion of the free-floating non-cooperative target, dynamic parameters of the target must be firstly identified (estimated), such as inertia, angular momentum and kinetic energy and so on; then the predicted motion of the target can be acquired by substituting these identified parameters into the Euler’s equations of the target. Accurate prediction needs precise identification. This paper presents an effective method to identify these dynamic parameters of a free-floating non-cooperative target. This method is based on two steps, (1) the rough estimation of the parameters is computed using the motion observation data to the target, and (2) the best estimation of the parameters is found by an optimization method. In the optimization problem, the objective function is based on the difference between the observed and the predicted motion, and the interior-point method (IPM) is chosen as the optimization algorithm, which starts at the rough estimate obtained in the first step and finds a global minimum to the objective function with the guidance of objective function’s gradient. So the speed of IPM searching for the global minimum is fast, and an accurate identification can be obtained in time. The numerical results show that the proposed motion prediction algorithm is able to predict the motion of the target.     

一种在理论模线控制下的飞机结构立体图快速画法

绘制飞机结构立体图通常会涉及到飞机外形。由于飞机外形复杂，用传统方法绘制与外形有关的立体图不仅速度慢，而且局限性大。本文介绍一种在理论模线控制下的飞机结构立体图快速画法。     

多元高温合金固溶极限预测

综合考虑了溶质元素与基体元素的原子半径、电负性以及外层电子数的立方根对溶质元素固溶度的影响，推导出二元合金的固溶度定量方程，提出了多元高温合金固溶极限曲线的预测新方法，并将其应用于计算镍基和钴基三元合金相图的γ／（γ＋σ）相界和γ（γ＋μ）相界。结果表明，计算的固溶极限曲线与已知相图的固溶极限曲线较吻合，与Ｍｄ值法计算的相界比较，该方法具有较高的精度。