多机并联火箭羽流流场及其底部热环境分析

针对某多机并联火箭羽流流场结构复杂、底部热环境极为恶劣,有可能导致发动机结构部件失效的问题,通过数值仿真对其飞行过程不同高度下的羽流流场及热环境进行研究,并与热环境实测结果进行了对比分析。计算结果表明:火箭低空飞行时,各发动机羽流互不干扰,随着飞行高度不断增加,羽流逐渐扩张并开始相互干扰,最后在箭体底部出现明显回流,最大热流在起飞时刻,与飞行实测值基本一致。出现回流之前,箭体底部主要受辐射热影响,随着回流出现,对流热流随之增大,但也远小于起飞时刻的热流峰值。计算得到的多机并联火箭羽流流场及其热环境分布对发动机舱外结构热防护优化设计具有一定的指导意义。     

航天器时态规划技术研究进展

结合航天器自主运行的迫切需求,阐述了航天器任务规划问题给智能规划技术带来的挑战,并重点分析了具有时间属性的规划方法研究必要性。给出航天器时态规划定义,分别总结了状态空间时态规划建模方法和基于时间线的时态规划建模方法,并给出时态规划知识模型关键元素定义。根据规划方法发展现状,归纳总结前向链、模型转换、规划空间规划和分层任务网络四种方法在时态规划技术方面的特点和研究进展,着重描述各种方法对规划中时间要素的处理。在对目前的航天器时态规划技术发展趋势总结分析基础上,给出了未来航天器时态规划技术的发展建议。     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.     

激光雷达对沉潜油探测的探索*

目前,人们对于海洋沉潜油的规律研究及控制水平较低,特别是探测30m深度以内的浅海地区的沉潜油分布信息,其主要原因是缺乏快速有效的探测手段。北京遥测技术研究所开发水下探测激光雷达样机,利用激光在海水中良好的透过特性,用于对水下沉潜油的探测以及对海底等目标的高精度探测。样机完成在水池中进行水下沉潜油的模拟探测试验,对沉潜油样本的典型激光回波信号进行采集分析,并测量模拟探测深度。试验结果基本符合设计预期,为进一步提升激光雷达沉潜油探测能力打下良好基础。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.     

旋转导弹等效合力在线自适应补偿方法研究

针对旋转导弹舵系统在偏转过程中出现的相位滞后和幅值畸变，给出了一种在线自适应补偿方法。介绍了旋转导弹的控制原理，并对其等效合力畸变的机理进行分析，同时对传统的补偿手段在工程实际中遇到的问题展开说明。在此基础上提出了一种不基于精确模型的等效合力自适应补偿方法，该方法利用输入信号和实际输出之间的偏差形成闭环反馈，通过合适的补偿算法实现对等效合力大小和方向的准确补偿。最后通过数字仿真对比分析，检验了该方法的有效性。     

Hypersonic vehicle aerodynamic design using modified sequential approximate optimization

Hypersonic vehicles are receiving increased attention within the aerospace community due to their high cruise speed and long-range capabilities. In this paper, a modified Sequential Approximate Optimization method is proposed for an optimized aerodynamic design of a hypersonic vehicle. As part of this approach, a constrained experimental design method is developed to handle the constraints more efficiently. A radial basis function is used to surrogate time-consuming CFD analysis. An efficient and more robust numerical mesh morphing scheme for the hypersonic vehicle is developed for the generation of high-quality meshes. Within this paper, a novel adaptive infilling strategy is proposed which uses an inaccurate search technique coupled with an elite archive. This allows the location of a more promising sample region and hence improves the surrogate accuracy, thereby further enhancing the optimization efficiency. A hypersonic vehicle aerodynamic design problem is solved using the proposed approach and satisfactory results are obtained at much lower computational costs. The lift-to-drag ratio is increased by 23.8% when compared with the base configuration while also satisfying the volume and lift constraints. The pressure and Mach contours have been compared with those of the base configuration and the results demonstrate the strength of the optimized configuration. The modified sequential approximate optimization for designing an improved hypersonic vehicle is worth referencing in future work.     

振动系统特征值和特征向量的—阶导数

本文主要解决两个问题:(1)频率集聚时,如何计算特征值(固有频率的平方)和特征向量(振型)的一阶导数,(2)如果仅获得了少数的低阶模态,如何改进已有的模态展开法,使其能用于计算低阶特征向量的一阶导数。     

飞机静不定结构非线性应力计算—参考模量法

应用虚拟载荷法解飞机静不定结构非线性应力，当非线性充分发展时，因虚载荷过大而导致发散。本文提出参考模量法，使虚载荷减小，从而使收敛性大大提高。