高阻尼铸铁的机械性能和阻尼性能

论述了高阻尼铁的机械性能和阻尼性能，研究结果表明：高阻尼铸铁的机械性能高于相同碳当量的灰口铸铁，其中，抗拉强度提高４０－１２０ＭＰａ，有的提高１５０ＭＰａ，硬度提高２０－６０ＨＢＳ；高阻尼铸铁的阻尼性能随碳当量的增加而提高，其阻尼性能高于相同碳当量的灰口铸铁，约为灰铸铁的２－３倍。另外，高阻尼铸铁的阻尼性能有温度有关，一般室温的阻尼性能高于高温（１２０℃）时的阻尼性能，从室温到高温，其阻尼性能下降     

不连续增强镁基复合材料的制备与应用

综述了不连续增强镁基复合材料的制备工艺及特点，介绍了其应用情况，展望了其发展前景。     

部分喷嘴关闭对预旋供气系统参数均匀性影响的计算

为了研究部分喷嘴关闭对预旋供气系统的供气流量和供气温度及其均匀性的影响,采用稳态的固定转子相位法对180°旋转盘腔进行了数值模拟,并通过改变转子相位的稳态计算来近似模拟瞬态问题的时空变化特性。结果表明:在设计点工况(系统压比为1.32,旋转马赫数为0.678)下,喷嘴流通面积关闭14.3%时,引气总流量和供气总流量分别下降10.9%和9.9%。单个供气孔流量的波动幅度由1.1%增大为5.4%。供气的相对总温降低1 K左右,波动幅度由约0.5 K增大为1.5 K。     

一种小天体探测器绕飞轨道主动抗扰控制方法

针对小天体绕飞探测过程中,探测器受到的非球形引力摄动及太阳光压等多源扰动问题,结合绕飞探测的周期性特点,提出一种小天体探测器绕飞轨道主动抗扰控制方法。首先,通过迭代学习控制对小天体探测器受多源扰动影响产生的误差进行抑制,然后设计扰动观测器估计系统总扰动,构造自适应律实时估计扰动上界,进而设计控制律对总扰动进行主动补偿。最后以243Ida作为目标天体进行绕飞探测仿真分析,结果表明该控制方法能更加有效地提高小天体探测器的轨道跟踪控制精度。     

Numerical analysis on noise of rotor with unconventional blade tips based on CFD/Kirchhoff method

A solver is developed aiming at efficiently predicting rotor noise in hover and forward flight. In this solver, the nonlinear near-field solutions are calculated by a hybrid approach which includes the Navier-Stokes and Euler equations based on a moving-embedded grid system and adaptive grid methodology. A combination of the third-order upwind scheme and flux-difference splitting scheme, instead of the second-order center-difference scheme which may cause larger wake dissipation, has been employed in the present computational fluid dynamics (CFD) method. The sound pressure data in the near field can be calculated directly by solving the Navier-Stokes equations, and the sound propagation can be predicted by the Kirchhoff method. A harmonic expansion approach is presented for rotor far-field noise prediction, which gives an analytical expression for the integral function in the Kirchhoff formula. As a result, the interpolation process is simplified and the efficiency and accuracy of the interpolation are improved. Then, the high-speed impulsive (HIS) noise of a helicopter rotor at different tip Mach numbers and on different observers is calculated and analyzed in hover and forward flight, which shows a highly directional characteristic of the rotor HIS noise with a maximum value in the rotor plane, and the HSI noise weakens rapidly with the increasing of the directivity angle. In order to investigate the effects of the rotor blade-tip shape on its aeroacoustic characteristics, four kinds of blade tips are designed and their noise characteristics have been simulated. At last, a new unconventional CLOR-II blade tip has been designed, and the noise characteristics of the presented CLOR-II model rotor have been simulated and measured compared to the reference rotors with a rectangular or swept-back platform blade tip. The results demonstrate that the unconventional CLOR-II blade tip can significantly reduce the HSI noise of a rotor.     

Integration of GPS and low cost INS for pedestrian navigation aided by building layout

In outdoor environments, GPS is often used for pedestrian navigation by utilizing its signals for position computation, but in indoor or semi-obstructed environments, GPS signals are often unavailable. Therefore, pedestrian navigation for these environments should be realized by the integration of GPS and inertial navigation system （INS）. However, the lowcost INS could induce errors that may result in a large position drift. The problem can be minimized by mounting the sensors on the pedestrian＇s foot, using zero velocity update （ZUPT） method with the standard navigation algorithm to restrict the error growth. However, heading drift still remains despite using ZUPT measurements since the heading error is unobservable. Also, tbot mounted INS suffers from the initialization ambiguity of position and heading from GPS. In this paper, a novel algorithm is developed to mitigate the heading drift problem when using ZUPT. The method uses building lay- out to aid the heading measurement in Kalman filter, and it could also be combined for the initial- ization. The algorithm has been investigated with real field trials using the low cost Microstrain 3DM-GX3-25 inertial sensor, a Leica GS10 GPS receiver and a uBlox EVK-6T GPS receiver. It could be concluded that the proposed method offers a significant improvement in position accuracy for the long period, allowing pedestrian navigation for nearly40 min with mean position error less than 2.8 m. This method also has a considerable effect on the accuracy of the initialization.     

Reentry trajectory optimization for hypersonic vehicle satisfying complex constraints

The reentry trajectory optimization for hypersonic vehicle（HV）is a current problem of great interest.Some complex constraints,such as waypoints for reconnaissance and no-fly zones for threat avoidance,are inevitably involved in a global strike mission.Of the many direct methods,Gauss pseudospectral method（GPM）has been demonstrated as an effective tool to solve the trajectory optimization problem with typical constraints.However,a series of diffculties arises for complex constraints,such as the uncertainty of passage time for waypoints and the inaccuracy of approximate trajectory near no-fly zones.The research herein proposes a multi-phase technique based on the GPM to generate an optimal reentry trajectory for HV satisfying waypoint and nofly zone constraints.Three kinds of specifc breaks are introduced to divide the full trajectory into multiple phases.The continuity conditions are presented to ensure a smooth connection between each pair of phases.Numerical examples for reentry trajectory optimization in free-space flight and with complex constraints are used to demonstrate the proposed technique.Simulation results show the feasible application of multi-phase technique in reentry trajectory optimization with waypoint and no-fly zone constraints.     

A new design of low-power portable digital ionosonde

The Ionospheric Laboratory of Wuhan University is interested in upgrading its instrumentation replacing the WIOBSS (Wuhan Ionospheric Oblique Backscattering Sounding System) with a more flexible and automatic ionosonde. Then the updated ionosonde WMI (Wuhan Multifunctional Ionosonde) with automatic ionogram scaling has been developed to satisfy future research. The new system not only inherited some classic techniques from WIOBSS, such as the pulse compression and the coherent integration techniques, but also made great improvements in hardware design and software updating. This paper mainly introduces evolutions of this new ionosonde in both digital transceiver and digital signal processing domain, and also presents some observations.     

某交流换流器自动测试系统设计

提出了交流换流器自动测试系统的解决方案,分别从硬件和软件两方面做了详细分析,并介绍了各主要参数的测试方法。系统的实际应用表明:本设计方案能够实现交流换流器主要被测参数的自动测试,可靠性和准确性能够满足交流换流器各项技术指标的要求。     

基于ADRC的航空发动机限制保护器设计

发动机限制保护器在航空发动机运行过程中对特定的被限制量进行实时监控,在其超出安全范围时实施限制,实现对航空发动机的保护.将自抗扰技术用于限制保护控制器设计,利用自抗扰控制器的扩张观测器,动态估计未知扰动和系统特性,对实际控制量进行反馈补偿,实现超限后的快速保护,提高了发动机的安全性.仿真结果表明:所设计的自抗扰限制保护控制器能将超限偏差有效转化为对主回路指令的修正,综合控制系统响应速度快,达到了限制保护的目的.