不连续增强镁基复合材料的制备与应用

综述了不连续增强镁基复合材料的制备工艺及特点，介绍了其应用情况，展望了其发展前景。     

部分喷嘴关闭对预旋供气系统参数均匀性影响的计算

为了研究部分喷嘴关闭对预旋供气系统的供气流量和供气温度及其均匀性的影响,采用稳态的固定转子相位法对180°旋转盘腔进行了数值模拟,并通过改变转子相位的稳态计算来近似模拟瞬态问题的时空变化特性。结果表明:在设计点工况(系统压比为1.32,旋转马赫数为0.678)下,喷嘴流通面积关闭14.3%时,引气总流量和供气总流量分别下降10.9%和9.9%。单个供气孔流量的波动幅度由1.1%增大为5.4%。供气的相对总温降低1 K左右,波动幅度由约0.5 K增大为1.5 K。     

天线罩误差下基于ADP的机动目标拦截制导策略

针对导弹导引头存在的天线罩误差,提出了一种基于自适应动态规划(ADP)的制导策略。不同于传统处理天线罩误差的估计与补偿方式,避免了估计过程中产生的误差影响。在导弹拦截机动目标的场景下,将拦截问题转化为鲁棒最优控制问题。设计了一种既可以消除天线罩误差和目标机动影响,又可以保证控制能量最小的代价函数。通过构造评价网络,利用自适应动态规划来求解近似鲁棒最优制导策略,并附加鲁棒控制项得到最终的机动目标拦截制导策略。采用李雅普诺夫稳定性理论证明了权值误差的一致最终有界和闭环系统的渐近稳定。仿真结果验证了所提出制导策略对天线罩误差下拦截机动目标的有效性。     

Numerical analysis on noise of rotor with unconventional blade tips based on CFD/Kirchhoff method

A solver is developed aiming at efficiently predicting rotor noise in hover and forward flight. In this solver, the nonlinear near-field solutions are calculated by a hybrid approach which includes the Navier-Stokes and Euler equations based on a moving-embedded grid system and adaptive grid methodology. A combination of the third-order upwind scheme and flux-difference splitting scheme, instead of the second-order center-difference scheme which may cause larger wake dissipation, has been employed in the present computational fluid dynamics (CFD) method. The sound pressure data in the near field can be calculated directly by solving the Navier-Stokes equations, and the sound propagation can be predicted by the Kirchhoff method. A harmonic expansion approach is presented for rotor far-field noise prediction, which gives an analytical expression for the integral function in the Kirchhoff formula. As a result, the interpolation process is simplified and the efficiency and accuracy of the interpolation are improved. Then, the high-speed impulsive (HIS) noise of a helicopter rotor at different tip Mach numbers and on different observers is calculated and analyzed in hover and forward flight, which shows a highly directional characteristic of the rotor HIS noise with a maximum value in the rotor plane, and the HSI noise weakens rapidly with the increasing of the directivity angle. In order to investigate the effects of the rotor blade-tip shape on its aeroacoustic characteristics, four kinds of blade tips are designed and their noise characteristics have been simulated. At last, a new unconventional CLOR-II blade tip has been designed, and the noise characteristics of the presented CLOR-II model rotor have been simulated and measured compared to the reference rotors with a rectangular or swept-back platform blade tip. The results demonstrate that the unconventional CLOR-II blade tip can significantly reduce the HSI noise of a rotor.     

Integration of GPS and low cost INS for pedestrian navigation aided by building layout

In outdoor environments, GPS is often used for pedestrian navigation by utilizing its signals for position computation, but in indoor or semi-obstructed environments, GPS signals are often unavailable. Therefore, pedestrian navigation for these environments should be realized by the integration of GPS and inertial navigation system （INS）. However, the lowcost INS could induce errors that may result in a large position drift. The problem can be minimized by mounting the sensors on the pedestrian＇s foot, using zero velocity update （ZUPT） method with the standard navigation algorithm to restrict the error growth. However, heading drift still remains despite using ZUPT measurements since the heading error is unobservable. Also, tbot mounted INS suffers from the initialization ambiguity of position and heading from GPS. In this paper, a novel algorithm is developed to mitigate the heading drift problem when using ZUPT. The method uses building lay- out to aid the heading measurement in Kalman filter, and it could also be combined for the initial- ization. The algorithm has been investigated with real field trials using the low cost Microstrain 3DM-GX3-25 inertial sensor, a Leica GS10 GPS receiver and a uBlox EVK-6T GPS receiver. It could be concluded that the proposed method offers a significant improvement in position accuracy for the long period, allowing pedestrian navigation for nearly40 min with mean position error less than 2.8 m. This method also has a considerable effect on the accuracy of the initialization.     

Reentry trajectory optimization for hypersonic vehicle satisfying complex constraints

The reentry trajectory optimization for hypersonic vehicle（HV）is a current problem of great interest.Some complex constraints,such as waypoints for reconnaissance and no-fly zones for threat avoidance,are inevitably involved in a global strike mission.Of the many direct methods,Gauss pseudospectral method（GPM）has been demonstrated as an effective tool to solve the trajectory optimization problem with typical constraints.However,a series of diffculties arises for complex constraints,such as the uncertainty of passage time for waypoints and the inaccuracy of approximate trajectory near no-fly zones.The research herein proposes a multi-phase technique based on the GPM to generate an optimal reentry trajectory for HV satisfying waypoint and nofly zone constraints.Three kinds of specifc breaks are introduced to divide the full trajectory into multiple phases.The continuity conditions are presented to ensure a smooth connection between each pair of phases.Numerical examples for reentry trajectory optimization in free-space flight and with complex constraints are used to demonstrate the proposed technique.Simulation results show the feasible application of multi-phase technique in reentry trajectory optimization with waypoint and no-fly zone constraints.     

A new design of low-power portable digital ionosonde

The Ionospheric Laboratory of Wuhan University is interested in upgrading its instrumentation replacing the WIOBSS (Wuhan Ionospheric Oblique Backscattering Sounding System) with a more flexible and automatic ionosonde. Then the updated ionosonde WMI (Wuhan Multifunctional Ionosonde) with automatic ionogram scaling has been developed to satisfy future research. The new system not only inherited some classic techniques from WIOBSS, such as the pulse compression and the coherent integration techniques, but also made great improvements in hardware design and software updating. This paper mainly introduces evolutions of this new ionosonde in both digital transceiver and digital signal processing domain, and also presents some observations.     

某交流换流器自动测试系统设计

提出了交流换流器自动测试系统的解决方案,分别从硬件和软件两方面做了详细分析,并介绍了各主要参数的测试方法。系统的实际应用表明:本设计方案能够实现交流换流器主要被测参数的自动测试,可靠性和准确性能够满足交流换流器各项技术指标的要求。     

基于ADRC的航空发动机限制保护器设计

发动机限制保护器在航空发动机运行过程中对特定的被限制量进行实时监控,在其超出安全范围时实施限制,实现对航空发动机的保护.将自抗扰技术用于限制保护控制器设计,利用自抗扰控制器的扩张观测器,动态估计未知扰动和系统特性,对实际控制量进行反馈补偿,实现超限后的快速保护,提高了发动机的安全性.仿真结果表明:所设计的自抗扰限制保护控制器能将超限偏差有效转化为对主回路指令的修正,综合控制系统响应速度快,达到了限制保护的目的.     

基于B/S结构虚拟仪器系统设计与实现

在网络技术高速发展的基础上,针对频谱分析仪的共享操作以及远程操作等问题,提出基于B/S（浏览器/服务器）结构的网络虚拟仪器系统的解决方案。系统通过仪器控制软件完成对多种接口频谱仪的监视与控制,并通过服务端软件以页面形式实现系统与用户的交互。该系统可以部署在局域网或者互联网上,用户可以通过浏览器实现对频谱分析仪的访问与操作。根据方案开发的实验系统,通过测试已经具备了设计的功能需求,实现了频谱仪的网络共享和远程操作,为用户提供了一种方便、容易的仪器操作方式,具有一定实际应用价值。