降落伞拉直过程的多刚体模型

采用多刚体模型研究了降落伞的拉直过程。在动力学模型中将引导伞、伞包、拉出的伞绳及回收物处理为开链式多刚体;在仿真算法中提出了求解绳段间约束力的n阶递推算法。利用该模型可以研究降落伞拉直过程中的“绳帆”现象。     

单框架控制力矩陀螺系统的构型分析和对比研究

根据实际情况限定了大型航天器单框架控制力矩陀螺 (SGCMG)构型分析研究的对象 ;根据构型分析的主要指标 ,对常用的双平行构型、三平行构型、金字塔构型、四棱锥构型、五面锥构型和五棱锥构型等六种构型进行了分析 ,对比了相互的优缺点 ,得出了最优构型为五棱锥构型的结论 ,为大型航天器SGCMG系统选型提供了理论基础     

Ka波段高中频四次谐波混频器的实现

推导了反对接二级管混频原理与相差合成原理相结合实现四次谐波混频公式。结合公式提出了在Ka波段实现高中频四次谐波混频器的新的设计方案 ,进行了电路仿真并制作了混频器电路 ,通过仿真所得到的实验结果表明 ,公式推导正确设计思路切实可行     

基于离散事件方法的AFDX建模与仿真

采用了建模仿真的方法来分析航空电子全双工交换式以太网(AFDX,Avionics Full Duplex switched ethernet)协议.通过对AFDX协议的抽象,基于离散事件的建模方法,以基本的网络元素来抽象化网络中的端系统、交换机等设备,以离散事件来描述网络设备的行为,以此构建了AFDX网络模型,并依据模型实现了仿真.网络演算是一种理论计算AFDX最坏延迟界限的方法,将典型场景下仿真得到的结果与理论计算的结果进行比较,验证了模型.通过不同流量方案下仿真结果的对比,对AFDX进行了传输特性的分析.      

基于预计算和周期性的ECC标量乘法算法

在研究二进制、带符号的二进制(NAF,Non-Adjacent Form)等常见标量乘法算法的基础上,结合椭圆曲线基点的周期特性和预计算倍点序列方式,提出了一种新的标量乘法算法,并给出了新算法的详细步骤.点的周期性和系数决定了直接进行标量乘法运算还是转化为求其逆元,预计算倍点序列方式避免了椭圆曲线密码体制(ECC,Elliptic Curve Cryptosystem)加解密过程中大量的重复运算.为验证算法的正确性,采用密钥长度为192 bit椭圆曲线,给出了一个具体实例.实例结果和算法分析表明:与二进制和NAF算法相比,新算法虽占用了一些存储空间,但省去了倍点运算的时间开销,同时减少了点加的运算次数,极大地提高了标量乘法运算的效率.该算法的提出对完善ECC理论和加快ECC在实际中的应用具有重要意义.      

利用神经元拓展正则极端学习机预测时间序列

为实现对于时间序列预测数据的准确预测,提出一种神经元拓展正则极端学习机(NERELM,Neuron-Expanding Regularized Extreme Learning Machine),并研究了其在时间序列预测中的应用.NERELM根据结构风险最小化原理权衡经验风险与结构风险,以逐次拓展隐层神经元的方式自动确定最佳的网络结构,以避免传统神经网络训练过程中需人为确定网络结构的弊端.应用于时间序列的仿真结果表明:NERELM可有效实现对于RELM最佳网络结构的自动确定,具有预测精度高与计算速度快的优点.      

用于热控涂层性能原位测试的辐射计设计

针对空间环境中热控涂层性能退化的问题,提出一种模拟空间环境中利用测热法实现热控涂层太阳吸收率原位测试的辐射计设计方案.结合模拟空间环境的测试要求,进行辐射计的原理设计与理论研究;对辐射计进行结构热分析,建立辐射计测试过程中各项换热的计算式,从而得到辐射计的瞬态计算模型.恒温测试环境下利用辐射计对SR107热控涂层进行了测试.实验结果表明:辐射计测试的SR107热控涂层太阳吸收率值与该涂层的标定值之间的相对误差在2%以内,测试的不确定度为6.3%,实验结果验证了该测试方法的有效性.      

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

基于下降图像三维地形重建的参数自适应生成

针对基于单应性下降图像着陆区三维地形重建算法中重建参数对重建结果的影响,提出一种参数自适应生成算法计算最优重建参数.首先,根据匹配特征点对应的空间点拟合出地形近似平面,作为系列平行虚拟切分平面的参考平面,从而确定切分平面的法向和基本深度.其次,在地形近似平面两侧,分别计算特征点对对应的空间点到地形拟合平面最大距离,用于估计重建区地形高度差异.最后,根据地形高度差异和相机距地形拟合平面距离,寻找最优切分平面个数.根据这些重建参数即可计算地形重建所需单应矩阵.对比不同重建参数下的重建结果表明该参数设定方法可以达到更优重建效果.