Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

分组级短码长LT喷泉码的工程应用

针对LT喷泉码在准单向链路、高差错、链路恶劣易中断的信道环境应用时出现的运算量大、译码时延长、编码效率较低等问题,文章提出使用基于数据分块的分组级短码长喷泉码方案。其思想是将短码长LT码方案和分组级LT码方案结合起来,并且在数据子块的度序列生成过程中加入度值检测机制。实验仿真结果表明:与已提出的LT码方案相比,该方案能够有效地降低译码开销、计算代价和译码时延,提高系统的最大传输效率。     

发动机租赁企业调整商业模式应对市场变化

在过去几年内,发动机租赁市场悄然发生着变化,相应地,发动机租赁企业也在调整其商业模式,以适应航空公司运营方式的新变化以及行业竞争加剧的现状。     

STUDY ON THE SOLUTION OF DYNAMIC THERMOELASTICITY SYSTEM

ＳＴＵＤＹＯＮＴＨＥＳＯＬＵＴＩＯＮＯＦＤＹＮＡＭＩＣＴＨＥＲＭＯＥＬＡＳＴＩＣＩＴＹＳＹＳＴＥＭＧｅｎｇＺｈｅｎｗｅｎ（ＢａｓｉｃＤｅｐａｒｔｍｅｎｔ，ＺｈｏｎｇｚｈｏｕＵｎｉｖｅｒｓｉｔｙ５２Ｈａｎｇｈａｉｚｈｏｎｇｌｕ，Ｚｈｅｎｇｚｈｏｕ４５０...     

A PARALLEL IMAGINARY EBE METHOD FOR SOLVING POSITIVE DEFINITE LINEAR SYSTEMS

ＡＰＡＲＡＬＬＥＬＩＭＡＧＩＮＡＲＹＥＢＥＭＥＴＨＯＤＦＯＲＳＯＬＶＩＮＧＰＯＳＩＴＩＶＥＤＥＦＩＮＩＴＥＬＩＮＥＡＲＳＹＳＴＥＭＳＰａｎＸｉａｏｓｕ（ＤｅｐａｒｔｍｅｎｔｏｆＡｐｐｌｉｅｄＭａｔｈｅｍａｔｉｃｓ，ＰｈｙｓｉｃｓａｎｄＭｅｃｈａｎｉｓ...     

ELECTRONIC CONTROL OF TURBINE POWER UNITS

ＥＬＥＣＴＲＯＮＩＣＣＯＮＴＲＯＬＯＦＴＵＲＢＩＮＥＰＯＷＥＲＵＮＩＴＳ￥ＷａｎｇＤａｏｂｏ（ＤｅｐａｒｔｍｅｎｔｏｆＳｃｉｅｎｃｅａｎｄＴｅｃｈｎｏｌｏｇｙ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉｎｇ２１００１６，Ｐ．Ｒ．Ｃｈｉｎａ）Ａｂｓ...     

DATA PROCESSING ON LINEARIZATION OF HOT-WIRE ANEMOMETER

ＤＡＴＡＰＲＯＣＥＳＳＩＮＧＯＮＬＩＮＥＡＲＩＺＡＴＩＯＮＯＦＨＯＴ－ＷＩＲＥＡＮＥＭＯＭＥＴＥＲ￥ＬｉＳｕｆｅｎ（ＤｅｐａｒｔｍｅｎｔｏｆＰｏｗｅｒＥｎｇｉｎｅｅｒｉｎｇ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉｎｇ２１００１６，Ｐ．Ｒ．Ｃｈ...     

A NEW EXPRESSION OF FATIGUE SIZE FACTOR

ＡＮＥＷＥＸＰＲＥＳＳＩＯＮＯＦＦＡＴＩＧＵＥＳＩＺＥＦＡＣＴＯＲ￥ＹａｏＷｅｉｘｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＡｉｒｃｒａｆｔＥｎｇｉｎｅｅｒｉｎｇ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉｎｇ２１００１６，Ｐ．Ｒ．Ｃｈｉｎａ）Ａｂｓｔｒａ...     

1/3含口盖复合材料柱壳后屈曲性能

工程结构中复合材料柱壳已经得到了广泛使用,并且屈曲是其结构设计的一个主要问题。由于试验结果与线性屈曲理论分析结果的巨大偏差,线性特征值屈曲分析只能作为结构的一个初步评估方法,进一步分析可选用含初始几何缺陷的后屈曲分析。本文以轴压载荷下的1/3含口盖复合材料柱壳为研究对象,建立ABAQUS有限元模型,分别进行了基于Buckle算法的线性特征值屈曲分析、基于Riks法的含初始几何缺陷的非线性后屈曲分析,所得应变、载荷数值结果与试验结果吻合。非线性Riks后屈曲分析显示结构具有后屈曲承载能力和稳定的后屈曲平衡路径,能更准确地捕捉临界屈曲载荷,所得屈曲模态也更加贴近试验屈曲模态,因此,在设计上以含初始几何缺陷的Riks法得到的结果更加真实可靠。进行了含口盖复合材料柱壳的初始几何缺陷的敏感性分析,结果表明该结构对初始几何缺陷是非常敏感的,为了提高结构抗屈曲性能,应提高加工工艺质量,减少初始几何缺陷。     

High-Order Discontinuous Galerkin Method for Hovering Rotor Simulations Based on a Rotating Reference Frame

An implicit higher ? order discontinuous Galerkin(DG) spatial discretization for the compressible Euler equations in a rotating frame of reference is presented and applied to a rotor in hover using hexahedral grids. Instead of auxiliary methods like grid adaptation,higher ? order simulations(fourth ? and fifth ? order accuracy) are adopted.Rigorous numerical experiments are carefully designed,conducted and analyzed. The results show generally excellent consistence with references and vigorously demonstrate the higher?order DG method's better performance in loading distribution computations and tip vortex capturing, with much fewer degrees of freedom(DoF). Detailed investigations on the outer boundary conditions for hovering rotors are presented as well. A simple but effective speed smooth procedure is developed specially for the DG method. Further results reveal that the rarely used pressure restriction for outlet speed has a considerable advantage over the extensively adopted vertical speed restriction.