基于离散事件方法的AFDX建模与仿真

采用了建模仿真的方法来分析航空电子全双工交换式以太网(AFDX,Avionics Full Duplex switched ethernet)协议.通过对AFDX协议的抽象,基于离散事件的建模方法,以基本的网络元素来抽象化网络中的端系统、交换机等设备,以离散事件来描述网络设备的行为,以此构建了AFDX网络模型,并依据模型实现了仿真.网络演算是一种理论计算AFDX最坏延迟界限的方法,将典型场景下仿真得到的结果与理论计算的结果进行比较,验证了模型.通过不同流量方案下仿真结果的对比,对AFDX进行了传输特性的分析.      

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

民用飞机驾驶舱构型快速设计方法

为在方案设计阶段提高民用飞机总体方案的设计质量和形成效率,研究了民用飞机驾驶舱构型的设计措施,并在一个开放式的飞机总体设计环境中实现了这一功能.定义了飞机机身坐标系,研究了确定驾驶员设计眼位、驾驶舱布置和风挡参数化设计与模型构建的方法.建立了交互式民机驾驶舱构型二、三维快速设计环境.在此基础上,实现了驾驶舱模型的自动化调整,为总体设计阶段进行多学科设计优化奠定了基础.通过设计实例证明了该方法的有效性.     

基于接触状态分析的叶冠阻尼评估与改进设计

采用基于接触状态分析的干摩擦阻尼结构设计方法,针对某型带冠涡轮叶片进行了阻尼评估与改进设计.接触状态包括接触形式和接触参数,通过接触形式从结构上判断结构设计的合理性;通过接触参数从力学性能上评价叶冠的阻尼效果.对叶片的动力特性、接触状态和振动响应进行综合评估分析,找出叶冠结构设计不足之处,并指出具体的改进措施,使叶冠的接触状态及振动响应得到一定的改善,并找到叶冠弦宽稳定工作范围.接触状态能够细致反映出叶冠工作状态下真实的接触情况,为叶冠结构设计和阻尼效果判定提供了更准确、详尽的参考依据.     

前缘吹气控制舵面流动分离

针对各种飞行器大舵偏下出现的流动分离问题,在北航D4风洞对旨在消除舵面流动分离的舵面前缘吹气技术进行了研究,为了降低控制分离所用的吹气量,吹气点设置在舵面前缘气流分离点处.应用粒子图像测速(PIV,Particle Image Velocimetry)技术,分析了舵面绕流在吹气量由小变大过程中所经历的3个不同演化阶段;由测压得到的舵面压力分布则显示,前缘吹气造成的引射作用使前缘吸力峰随吹气量增大而增大,这是前缘吹气能够使舵面升力增大的主要机理.实验结果还表明,前缘吹气可明显提高舵面升力,同时也可以显著降低舵面阻力.     

多星联合任务规划方法

针对多星对地观测系统联合任务规划问题,考虑卫星载荷具备连续侧摆能力和多种数据压缩模式的新特点,构建了多星联合任务规划模型,在此基础上设计多星联合任务规划和数传调度算法框架,实现了卫星连续侧摆成像规划算法和基于任务优先级的数传任务调度算法,最后采用实际算例进行试验,结果表明文章提出的多星联合任务规划方法能在提高完成任务数量的同时降低卫星资源消耗,满足实际应用需求。     

永磁球形电机的神经网络自适应控制算法

介绍了具有三维位置检测功能的三自由度永磁球形电机工作原理及其运动控制方法.结合球电机结构特性,基于XYZ 欧拉角和拉格朗日方程建立了球电机运动学及动力学模型.为了解决动力学模型建模误差、摩擦力和外界干扰等对球电机工作性能的影响,设计了神经网络逼近模型,并将其应用于球电机的控制之中.仿真结果表明这种控制方法与传统方法相比可以有效提高球电机的抗干扰能力,在建模误差比较大的情况下仍可以保证球电机的运动精度,其结果可以为进一步的球电机精密运动控制理论研究和实验方案设计提供借鉴和参考.      

月球着陆器悬停阶段相对自主导航方法

月球着陆器着陆阶段导航信息分析是实现安全软着陆月面的一个关键.针对悬停阶段导航信息的要求,根据月球着陆器携带的仪器设备及其获取月面信息的特点,利用激光测距仪和光学导航相机进行光学相对导航.首先建立相对导航坐标系;其次根据各个坐标系之间的关系确定各转换矩阵和导航信息,估算着陆器相对月面着陆点的位置和姿态;最后通过仿真实验对该方法进行验证.结果表明,将激光测距仪和光学导航相机在着陆悬停阶段获取的月面信息进行融合,能快速、精确进行相对位置、姿态计算;对我国下一步的探月有重要应用价值,并可应用于火星探测和其他小行星探测的软着陆的近距相对导航.