大型双曲冷却塔表面脉动风压随机特性——风压极值探讨

针对风压信号呈现的非高斯特性和传统极限估计方法的局限,首次提出基于保证率和相关性的极值估计方法——全概率迭代法进行冷却塔表面脉动风荷载极值分析,并和传统的峰值因子法及改进的Sadek-Simiu法计算结果进行对比验证。结果表明：全概率迭代法避开了对随机过程的高斯分布假定,相比传统的极值估计方法其结果更加真实可靠;表达风压极值中脉动分量的峰值因子数值沿着环向和子午向变化显著,如取为同一数值则偏于危险或过于保守;采用全概率迭代法得到的表面风压系数极值分布曲线与规范取值相比,迎风面和负压峰值区域极值偏小,背风区域极值偏大,且最小值对应角度相差约10°。     

Numerical Simulation of Rotor Flow Field Based on Overset Grids and Several Spatial and Temporal Discretization Schemes

A numerical method based on solutions of Euler/Navier-Stokes (N-S) equations is developed for calculating the flow field over a rotor in hover. Jameson central scheme, van Leer flux-vector splitting scheme, advection upwind splitting method (AUSM) scheme, upwind AUSM/van Leer scheme, AUSM+ scheme and AUSMDV scheme are implemented for spatial discretization, and van Albada limiter is also applied. For temporal discretization, both explicit Runge-Kutta method and implicit lower-upper symmetric Gauss-Seidel (LU-SGS) method are attempted. Simultaneously, overset grid technique is adopted. In detail, hole-map method is utilized to identify intergrid boundary points (IGBPs). Furthermore, aimed at identification issue of donor elements, inverse-map method is implemented. Eventually, blade surface pressure distributions derived from numerical simulation are validated compared with experimental data, showing that all the schemes mentioned above have the capability to predict the rotor flow field accurately. At the same time, vorticity contours are illustrated for analysis, and other characteristics are also analyzed.     

数字示波器在尖峰干扰脉冲强度测量中的应用

运用数字示波器瞬态捕获能力及面积测量功能，快速、准确、不遗漏地测量电子设备的尖峰干扰信号（脉冲信号），用公式将脉冲强度单位换算为脉冲频谱密度单位。     

基于共形天线的捷联被动导引头系统研究

基于共形天线的捷联被动导引头具有结构简单、隐蔽性好等优点，受到了广泛关注。对基于共形天线的捷联被动导引技术进行了研究，对该项技术的原理及关键技术进行了论述。该技术目前还处在研究阶段，有很大的发展空间。     

高职教育人才培养模式的创新与实践——以西安航空职业技术学院为例

随着高职教育内涵建设的发展需要,创新人才培养模式和提高高职教育质量迫在眉睫,西安航空职业技术学院坚持"工学四合"的育人模式,深化教学改革,提高人才培养质量,创新人才培养模式,对学院内涵建设的发展无论是理论上还是实践上都有积极意义。     

气动换向阀阀芯/阀座撞击特性研究

针对某型气动换向阀在研制过程中出现由于阀芯/阀座撞击变形导致阀芯卡死的现象,对阀芯/阀座的撞击特性进行了仿真研究,定量分析了撞击过程以及不同阀座高度对撞击特性的影响,根据仿真结果对换向阀进行了改进设计,试验结果表明改进后的换向阀满足使用要求.     

基于双框架控制力矩陀螺的航天器动量管理

为减小维持大型航天器的姿态稳定和降低能量消耗的动量管理中的扰动力矩对姿态稳定的干扰,设计了周期性抑制滤波器。姿态控制的执行机构采用双框架控制力矩陀螺群（DGCMGs）,应用KENNEL操纵率,使航天器执行机构的角动量在本体系的x轴分量和偏航角可达稳定,同时角动量在本体系的z轴分量和滚转角可在较小的范围内振荡。数值仿真结果验证了方案的可行性。     

环首都经济圈河北省居民体育生活方式现状与发展对策研究

本文采用文献资料法、问卷调查法,针对河北省14县市区的体育生活方式进行了调查研究,目的是为了改善居民不良的生活方式,培育居民科学、健康、文明的体育生活方式,为促进河北省全民健身计划的顺利实施提供有利的保障。     

卫星用两种单相流体回路方案对比研究

单相流体回路系统是航天器主动热控技术中的一种重要方式。文章概述了流体回路的工作原理及理论基础，总结了单相流体回路的设计思路，结合某卫星型号，设计了两种流体回路方案，在SINDA／FLUINT中建立数值仿真模型进行分析计算，并比较了两种方案的应用性能。结果显示，将单相流体回路系统应用于卫星，可取得较好的控温效果。     

Forming and keeping fast fly-around under constant thrust

A new switching control algorithm under constant thrust is designed for the chaser fast flying around the target spacecraft along a specified fly-around trajectory. The switching control laws are obtained based on the acceleration sequences and the on time of thrusters which can be computed by the time series analysis method. The perturbations and fuel consumptions are addressed during the computation of the on time of thrusters. Furthermore, the relative position parameters of the target spacecraft are obtained by using the vision measurement and the target fly-around positions are calculated through the isochronous interpolation method. The change of the relative position and the relative velocity of the chaser during the constant thrust fast fly-around are presented through simulation example. It is proved that, with the switching control laws, the chaser will fast fly around the target spacecraft along the specified fly-around trajectory.