激光辐照充压壳体的破坏评价(Ⅰ)——破坏概率分析

时激光辐照充压壳体破坏(失效)的结果进行评价时,对有关物理参量的不确定性进行定量分析是必要的.以充压壳体破坏(失效)的断裂机理为基础,讨论了如何建立壳体结构破坏(失效)的评价方法,问题的核心是建立壳体结构破坏(失效)的概率模型.该模型中,将影响结构破坏的各个物理参量划分为驱动力和抗力两种类型,通过计算驱动力和抗力的均值和标准差,可得到结构的破坏概率.在此基础上,给出了数值算例,得到了不同加载条件下模型壳体的破坏概率.     

基于双目视觉的返回舱着陆横向速度测量

通过分析返回舱在着陆时所具有的水平速度也可能对着陆安全构成威胁的事实，论述了为返回舱增加横向缓冲装置的必要性，由此提出亟需解决的问题——在返回舱着陆下降过程中测量其水平运动速度。提出了全新概念的以视觉图像为唯一信息来源的返回舱水平速度测量方法，仅以双目摄像机系统作为传感器，避免了对返回舱原有传感器系统的改造。通过对着陆区域地面图像的采集和在线处理，利用双目交会测量原理得到返回舱当前的大地坐标和姿态。仿真实验证明，方法简单易行，测量结果可靠。     

海洋大气环境下微动开关触点回跳时间增大故障的试验复现与分析

结合某型微动开关触点回跳时间增大导致某系统故障问题,设计了由干湿交替酸性盐雾试验和湿热试验组成的海洋大气环境效应加速模拟试验剖面,选取与外场故障件型号一致的微动开关为研究对象,通过实验室加速模拟试验,成功复现了外场故障现象,并结合试验结果对腐蚀性环境、电烧蚀等因素对触点回跳时间增大的影响机制进行了分析。     

Application of the Method of Integral Manifolds for Construction of Resonant Curves for the Problem of Spacecraft Entry into the Atmosphere

The separation of motions into slow (precession) and fast (nutation) components in the problem of the entry of a spacecraft (SC) with a small asymmetry into the atmosphere is considered. For the separation of the slow and fast motions the method of integral manifolds is used together with the asymptotic method for singularly perturbed systems. The separation of motions allows one to isolate the frequencies that are functions of the slow variables of a system, and further on, after determining the integer relations between them, to construct the resonant curves (surfaces). This method gives the possibility to analyze the conditions of the emergence of resonances for a SC at angles of attack that are not small and when aerodynamic characteristics are nonlinear. Examples of the construction of resonant curves for a SC with typical aerodynamic characteristics are considered.     

一种弹目遭遇点预测方法

为充分利用舰空导弹中制导段所获信息并减小导弹中制导段的弹道曲率,给出一种弹目预测遭遇点的解算方法,并据此设计比例导引制导律。在初始发射坐标系中,假设目标由当前位置以当前速度大小沿当前速度方向匀速运动至遭遇点,导弹由当前位置以当前速度大小按照一定的导引规律匀速运动至遭遇点。在该假设条件下,导弹到达遭遇点的总航路大小一方面...     

不同气体对涡流管能量分离效果的影响

通过实验的方法,分别对以空气、氮气、氩气和二氧化碳等气体为工质的涡流管的能量分离效应进行了研究,得出了涡流管的冷热效应、制冷量、单位制冷量和COP(性能系数,CoefficientofPerformance)随冷流率变化的特性曲线.研究表明:涡流管的冷热效应与工质的摩尔质量有着重要的关系,摩尔质量越大,其制冷和制热性能就越好;另外,在一定程度上还受气体本身的焦耳-汤姆逊系数的影响.对于制冷量和COP,除了跟工质的制冷效应和比热容有关外,跟摩尔质量也存在着相应的正比关系.      

基于数字近景摄影测量的天线变形测量

文章介绍了基于数字近景摄影测量原理的天线变形测量方法。该方法利用2台CCD相机交会摄影来获取被测面图像,并对被测面上特殊标志点进行中心坐标提取,然后利用光束法平差解算标志点中心坐标。测量精度可达到1:50000,可用于卫星天线研制过程中空间环境模拟试验的检验,为卫星天线在轨正常工作提供可靠性保证。     

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

某型教练机嵌入式训练系统顶层设计技术研究

本文通过对该型教练机现有航空电子系统构型、驾驶员操作程序、接口控制文件深入研究,结合未来功能扩展需求,给出了合理的系统构型分析、功能分配、数据流规划、原相关系统软件改动分析,在此基础上还设计出了嵌入式训练系统技术方案.依据方案研制的嵌入式训练系统原理样机通过系统动态试验、航电系统地面综合试验和飞机地面通电试验,证明系统...     

A software package for computer-aided design analysis of thin-walled structures from composite materials

An algorithm of analyzing the design parameters for a thin-walled wing from composite material based on the efficient distribution of structural material between load-carrying elements is described. We consider the problems of convergence acceleration for the iteration design analysis. Also presented are the examples of determining the design parameters for a superlight aircraft wing and the rational parameters of the filler in the form of a three-dimensional rod structure.