可重复使用飞行器进场着陆拉平纵向控制

针对可重复使用飞行器（RLV）进场着陆拉平段的纵向控制问题,提出了反馈控制与前馈控制相结合的复合控制策略。设计反馈控制律参数,在此基础上基于时间加权高度跟踪误差/误差变化率平方积分指标优化设计前馈控制律参数。按输入补偿的前馈控制在不影响系统稳定性的前提下,提高了RLV对拉平着陆轨迹的跟踪精度,减小了RLV的接地散布。提出了基于积分器初值的控制律平滑切换方法,实现了RLV起落架释放前后不同控制律之间的平滑切换。仿真验证了拉平纵向复合控制和拉平过程中不同控制律之间平滑切换方法的有效性。      

采用弱攻角补偿与脱敏设计的火星进入段制导

为提升火星进入段存在多种扰动时的制导末端精度,在现有三自由度脱敏设计的基础上,提出针对大气密度及升阻力系数波动的弱攻角补偿方法。通过攻角调整,协调升、阻力加速度测量值相对理论计算值的偏离程度,使加权形式的偏离程度指标趋近于1,从而降低气动参数波动对制导精度的影响。相平面分析和反证法证明了攻角调整过程的稳定性。蒙特卡洛仿真结果表明,该方法可达到较高的纵向末端状态精度。     

A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.     

利用CFD技术计算飞行器动导数

利用非定常流场数值计算方法模拟飞行器强迫俯仰振荡仅能得到俯仰力矩系数对迎角变化率和俯仰角速度的动导数之和,而动稳定性分析需要单独的动导数数值.为解决这个问题,利用滑移网格模拟强迫振荡运动,得到俯仰力矩系数对迎角变化率和俯仰角速度的动导数之和.利用旋转参考坐标系模拟定常拉升,得到俯仰力矩系数对俯仰角速度的动导数.利用旋转参考坐标系模拟匀速滚转,得到滚转力矩系数对滚转角速度的动导数.对有翼导弹和水上飞机进行了纵向和横向动导数的计算.计算结果与试验数据、文献数据以及其他方法得到的结果具有较好的一致性,表明提出的方法可用于复杂外形飞行器动导数计算.     

材料加工技术在低碳经济中的应用及发展

介绍了低碳经济形势下的薄坯铸轧、精密成形加工、闪光焊、无模成形、内高压成形以及其他先进成形加工技术,并展望了先进材料加工技术的发展趋势.     

三维打印技术在粉末材料快速成形中的研究现状评述

基于微喷射的三维打印快速成形技术,集CAD/CAM、数据处理、材料科学、微滴喷射和数控等多种技术于一体,是当前较成熟的快速成形技术之一。     

光电技术在中国深空探测中的应用

文章简单回顾了中国深空探测已走过的历程和正在进行的项目,展望了今后的发展;分析了深空探测器及其有效栽荷对光电技术的需求;重点对中国已发射的月球探测器"嫦娥一号"、"嫦娥二号"中应用的光电技术和获取的成果,正在研制的"嫦娥三号"探测器中所应用的光电技术,月球探测三期和今后可能发展的深空探测项目中预计采用的光电技术的研制工...     

基于CE-PF算法的舰载机离场调度优化问题

甲板作业调度研究是提升航母战斗力的关键技术,而其具有时间、空间与资源受限的复杂约束调度问题已被证实为NP-hard。根据舰载机出动离场调度优化问题的特点,将其抽象为零缓存区混合流水车间调度模型,建立包含飞机避碰等约束的混合整数规划模型。提出一种交叉熵与作业剖面匹配(CE-PF)算法用于问题求解,并给出了算法流程架构。交叉熵算法通过高斯采样完成启发式规则下的工件分组,作业剖面匹配算法完成分组工件的任务排序、作业编排及约束检查等调度设计,Gap逼近算法进行目标值评估、精英种群选择、抽样参数更新及收敛判定。通过算例仿真,验证了CE-PF算法求解离场调度优化问题的有效性;灵敏度分析表明起飞模式和空间约束对出动效能影响较大。      

锥柱形药柱环形槽内传热现象的数值研究

采用标准k-ε湍流模型和离散传递热辐射模型对不同来流雷诺数下锥柱形药柱前向环形槽内的流场与传热进行了数值研究。对槽内各表面与热气流之间的换热量进行了比较,并对努塞尔数沿环形槽各表面的变化进行了分析。结果表明来流雷诺数的大小影响环形槽内的旋涡数和旋涡区域的分布,进而影响槽内温度的分布,最终影响槽内装药表面与点火热气流之间的换热量。整个计算结果可为装药设计和分析推进剂的热解燃烧提供参考。     

Drag Reduction for an Airship with Proper Arrangement of Propellers

In this article, the flow field around an airship with propellers blowing is calculated on the basis of the Reynolds-averaged Navier-Stokes equations with SST turbulent models. Modeled each as an actuator disk, the propellers are arranged at different positions around the body of airship in the flow direction. The numerical results show that the blowing propellers produce open outer flows. They drive the separated vortexes off the body thus reducing the drag coefficients. The results also show that the position after leading sucking peak is the best place for a propeller to blow. When the propellers are positioned after sucking peak, the longer the area which the propellers work on, the more the profile drag coefficients can be reduced. If the working position of propeller moves from the sucking peak forward to the leading edge, the friction drag coefficient will increase. The bigger the diameter of the propellers and the stronger the pressure jump, the more the drag coefficient will be reduced. The results also reveal that for the design of circularly-positioned propellers with space intervals, the more drag coefficient reduction results, the smaller the space interval is specified.