ASIC技术在弹载计算机小型化中的应用

扼要介绍了高层次设计方法和ＡＳＩＣ（ＡｐｐｌｉｃａｔｉｏｎＳｐｅｃｉｆｉｃＩｎｔｅｇｒａｔｅｄＣｉｒｃｕｉｔ）技术，并给出了一个在弹载计算机小型化设计中的应用实例。     

空间机器人地面实验系统的一种鲁棒自适应控制方法

基于李亚普诺夫稳定性直接方法, 针对具有参数及模型不确定性的空间机器人地面实验系统, 提出了一种新的鲁棒自适应控制器。该控制器由三部分组成: 线性PD反馈项, 补偿动力学的自适应控制项, 补偿建模不确定性的鲁棒控制项。控制策略能有效地克服未建模的摩擦力和外部扰动以及吊丝配重系统未补偿掉的重力影响, 并且能保证全局最终一致有界。仿真表明了算法的可行性和有效性     

BF3及其衍生物在Al／HTPB／IPDI模拟推进剂中的作用研究

用单向拉伸试验、红外光谱分析、化学分析等实验方法对BF_3及其衍生物在Al/HTPB模拟推进剂中的作用进行了研究。试验结果表明,BF_3及其衍生物加入后显著影响其力学性能,其原因是,BF_3及其衍生物在Al存在下,与HTPB发生凝胶化反应,这导致模拟推进剂凝胶含量、交联密度上升。由此可见,BF_3在推进剂中的作用,不仅仅是MAPO开环聚合的一种催化剂,而且是丁羟粘合剂基体的一种网络调节剂。     

Numerical analysis for impacts of nozzle end-clearances on aerodynamic performance and forced response in a VNT turbine

It has been well known that nozzle end-clearances in a Variable Nozzle Turbine (VNT) are unfavorable for aerodynamic performance, especially at small openings, and efforts to further decrease size of the clearances are very hard due to thermal expansion. In this paper, both the different sizes of nozzle end-clearances and the various ratios of their distribution at the hub and shroud sides were modelled and investigated by performing 3D Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) simulations with a code of transferring the aerodynamic pressure from the CFD results to the FEA calculations. It was found that increasing the size of the nozzle end-clearances divided equally at the hub and shroud sides deteriorates turbine efficiency and turbine wheel reliability, yet increases turbine flow capacity. And, when the total nozzle end-clearances remain the same, varying nozzle end-clearances’ distribution at the hub and shroud sides not only shifts operation point of a VNT turbine, but also affects the turbine wheel vibration stress. Compared with nozzle hub clearance, the shroud clearance is more sensitive to both aerodynamic performance and reliability of a VNT turbine. Consequently, a possibility is put forward to improve VNT turbine efficiency meanwhile decrease vibration stress by optimizing nozzle end-clearances’ distribution.     

基于ECSS标准的航天器姿轨控系统内1553B总线数据协议设计

摘要： 国内外航天器姿轨控系统广泛应用基于1553B内总线的体系结构.针对国内航天器姿轨控系统内部1553B总线数据协议不统一带来的可集成性、可扩展性和通用性差的问题，本文设计了基于ECSS标准的姿轨控系统内1553B数据总线协议，从姿轨控系统内部总线数据业务需求分析出发，提出了四层结构的数据协议体系结构，重点介绍了在应用支持层和链路服务层应用ECSS标准的总线协议设计，并说明了协议的应用情况.应用该国际通用的标准协议，有助于实现国内航天器姿轨控系统内1553B总线数据协议的标准化，进而提升姿轨控系统体系结构的可集成性、可扩展性、以及星载设备(含软件)的通用化.     

Fault-tolerant control with mixed aerodynamic surfaces and RCS jets for hypersonic reentry vehicles

This paper proposes a fault-tolerant strategy for hypersonic reentry vehicles with mixed aerodynamic surfaces and reaction control systems (RCS) under external disturbances and subject to actuator faults. Aerodynamic surfaces are treated as the primary actuator in normal situations, and they are driven by a continuous quadratic programming (QP) allocator to generate torque com-manded by a nonlinear adaptive feedback control law. When aerodynamic surfaces encounter faults, they may not be able to provide sufficient torque as commanded, and RCS jets are activated to augment the aerodynamic surfaces to compensate for insufficient torque. Partial loss of effective-ness and stuck faults are considered in this paper, and observers are designed to detect and identify the faults. Based on the fault identification results, an RCS control allocator using integer linear programming (ILP) techniques is designed to determine the optimal combination of activated RCS jets. By treating the RCS control allocator as a quantization element, closed-loop stability with both continuous and quantized inputs is analyzed. Simulation results verify the effectiveness of the proposed method.     

A novel environmental control system based on membrane dehumidification

This paper conducts a simulation study of a novel aircraft environmental control system based on membrane dehumidification(MD-ECS),and compares the system with the up-to-date four-wheel high pressure de-water system(4WHPDW-ECS).Mathematical models for the two systems are established,and a system simulation using a numerical technique is performed to analyze and compare the cooling performance of the two systems.Simulation results show that the cooling capacity of MD-ECS is much higher than that of 4WHPDW-ECS under the same working conditions,indicating that the novel system is theoretically feasible and promising.The effects of the sweep ratio of the membrane dehumidifier on the dehumidification and cooling performance of the system is also investigated.     

Guidance law implementation with performance recovery using an extended high-gain observer

Guidance law of a homing missile is implemented using an extended high gain observer without the model assumptions on target maneuvers. First, for a class of multi-input–multi-output nonlinear systems, extended high-gain observers are used for output feedback control with partial practical stabilization. Then the method is applied to the guidance law implementation of a homing missile with bearing only measurement. Simulation results show satisfactory performance.     

Guide for Authors

About Journal Chinese Journal of Aeronautics (CJA) is a comprehensive academic journal dealing with the fields of aeronautics and astronautics. It reports researches concerning the two fields in China and abroad to promote the academic exchange.     

Longitudinal behaviors of the IRI-B parameters of the equatorial electron density profiles retrieved from FORMOSAT-3/COSMIC radio occultation measurements

The electron density profiles in the bottomside F₂-layer ionosphere are described by the thickness parameter B0 and the shape parameter B1 in the International Reference Ionosphere (IRI) model. We collected the ionospheric electron density (N_e) profiles from the FORMOSAT-3/COSMIC (F3/C) radio occultation measurements from DoY (day number of year) 194, 2006 to DoY 293, 2008 to investigate the daytime behaviors of IRI-B parameters (B0 and B1) in the equatorial regions. Our fittings confirm that the IRI bottomside profile function can well describe the averaged profiles in the bottomside ionosphere. Analysis of the equatorial electron density profile datasets provides unprecedented detail of the behaviors of B0 and B1 parameters in equatorial regions at low solar activity. The longitudinal averaged B1 has values comparable with IRI-2007 while it shows little seasonal variation. In contrast, the observed B0 presents semiannual variation with maxima in solstice months and minima in equinox months, which is not reproduced by IRI-2007. Moreover, there are complicated longitudinal variations of B0 with patterns varying with seasons. Peaks are distinct in the wave-like longitudinal structure of B0 in equinox months. An outstanding feature is that a stable peak appears around 100°E in four seasons. The significant longitudinal variation of B0 provides challenges for further improving the presentations of the bottomside ionosphere in IRI.