Experimental investigation on deformation behavior of TJ-1 lunar soil simulant subjected to principal stress rotation

The knowledge of mechanical properties of lunar soil is of fundamental importance for the coming exploration of the Moon. This paper aims to investigate the fundamental deformation behavior of lunar soil and the effects of the intermediate principal stress coefficient, deviatoric stress ratio, and mean stress during the principal stress rotation. First, an improved technique was proposed to generate homogeneous samples based on the Multi-layer Undercompaction Method. Second, three series of tests on TJ-1 lunar soil simulant under the principal stress rotation were performed with a hollow cylinder apparatus at Tongji University, China. In each series of tests, only one value of the three variables mentioned above was changed while the others were kept constant. The test results demonstrate that the rotation of principal stress can result in significant plastic deformation, volumetric strain, and non-coaxiality (non-coincidence of the increment direction of principal plastic strain with the principal stress direction) of TJ-1 lunar soil simulant. In addition, it is found that the intermediate principal stress coefficient, deviatoric stress ratio, and mean stress have different influences on the four strain components, i.e. _εz,_εr,_εθ${\epsilon }_z\text{,}{\epsilon }_{\text{r}}\text{,}{\epsilon }_{\theta }$ and _γzθ${\gamma }_{z\theta }$, volumetric strain, and non-coaxiality during the principal stress rotation. The influence of deviatoric stress ratio is relatively stronger than the others. Therefore, the influence of principal stress rotation on the deformation behavior of lunar soil should be taken into account carefully in the design and construction of facilities on the lunar surface in the future.     

冗余度机器人动力学优化控制研究

稳定性和终态自运动是动力学优化中的难点.为了解决冗余度机器人动力学优化中的这些困难,深入研究了动力学优化和关节速度间的内在联系和矛盾,提出通过优化关节速度提高动力学优化的综合品质的思想,阐述了在线调节关节速度齐次项,同时改善稳定性和终态自运动的方案.仿真证实所提方案的实用性和有效性.     

闭环FOG的自诊断及在RSDIMU中的应用

首先阐述了闭环干涉型光纤陀螺(I-FOG)中回路的特点,揭示了它的自诊断能力.由此给出了一种具有自诊断能力的闭环干涉型光纤陀螺并将它应用于一种容错捷联惯性测量单元(RSDIMU)中,针对该单元,设计了一种容错算法.该算法除了利用陀螺的输出外,还引入了它的自诊断信息,从而实现了仪表级的信息冗余,使这种RSDIMU的容错能力由原来的故障运行(FO)-故障运行(FO)-故障安全(FS)上升到FO-FO-FO-FO-FS.用Markov可靠性估计模型对该系统的估计表明,其可靠性也有了很大的提高.      

基于多目标的消磁绕组优化调整方法

针对目前舰船消磁绕组优化调整方法中只考虑舰艇磁场信号幅值而较少考虑磁场梯度信号幅值的不足,提出同时以磁场幅值和磁场梯度幅值削减为目标的优化调整方法.为此,首先以线圈等效电流值为优化对象,磁场和梯度峰值为优化目标,建立了消磁绕组优化调整的多目标数学模型;随后采用多目标微粒群算法求解得到了该优化问题的Pareto解集;最后通过一个计算实例验证了方法的有效性.实例结果表明该方法能够同时处理磁场和磁场梯度幅值,并能给出多种不同等效电流组合以供选择使用.     

Noise analysis of continuous GPS coordinate time series for CMONOC

The Crustal Movement Observation Network of China (CMONOC) is one of the major scientific infrastructures, mainly using Global Positioning System (GPS) measurements, to monitor crustal deformation in the Chinese mainland. In this paper, decade-long coordinate time series of 26 continuous GPS sites of CMONOC are analyzed for their noise content using maximum likelihood estimation (MLE). We study the noise properties of continuous GPS time series of CMONOC for the unfiltered, filtered solutions and also the common mode signals in terms of power law plus white noise model. In the spatial filtering, we remove for every time series a common mode error that was estimated from a modified stacking of position residuals from other sites within ∼1000 km of the selected site. We find that the common mode signal in our network has a combination of spatially correlated flicker noise and a common white noise with large spatial extent. We demonstrate that for the unfiltered solutions of CMONOC continuous GPS sites the main colored noise is a flicker process, with a mean spectral index of ∼1. For the filtered solutions, the main colored noise is a general power law process, indicating that a major number of the filtered regional solutions have a combination of noise sources or local effects. The velocity uncertainties from CMONOC continuous GPS coordinate time series may be underestimated by factors of 8–16 if a pure white noise model is assumed. In addition, using a white plus flicker noise model, the median values of velocity errors for the unfiltered solutions are 0.16 (north), 0.17 (east) and 0.58 (vertical) mm/yr, and the median values for the filtered solutions are 0.09 (north), 0.10 (east) and 0.40 (vertical) mm/yr.     

基于资源相关性的网格资源分配

在网格环境中,每个网格服务都面临着多种资源选择,网格作业中各服务间的关联在某种程度上可映射为资源之间的依赖关系,不同的资源配置将产生不同的服务满意度,由此提出服务资源分配问题SRA(Service Resource Assignment),通过构造资源关系图提出基于树分解的资源分配算法DRA(Tree\|Decomposition based Resource Allocation algorithm),利用该算法求出此问题的正确消元顺序,在多项式时间复杂度内获得该问题的最优解,给出实验结果并提出下一步的研究工作.      

新型驱动组件的研制及应用

叙述了一种新型中功率驱动组件的研制情况 ,通过利用冗余设计的基本理论 ,将串、并联的晶体管及电阻等分离器件 ,研制成集成电路系列。文章提供了该系列组件的内部详细电路图和各项技术参数 ,简述了一种该系列组件的应用实例。经过试验证明 ,新型驱动组件作为继电器类或等效负载的驱动电路 ,可以确保其不出现单点失效现象。     

异型孔空心叶片壁厚检测的试验研究

发动机叶片的结构型式和制造误差，直接影响发动机的性能和使用寿命。运用超声波法和电涡流法，对两种不同材料和形式的试件进行了试验。电涡流法受到探头直径和试件几何尺寸的影响，测量误差大，超声波法由于存在测量盲区，测量厚度的下限受到限制。但测量值与实际值相关，若对探头加以改进，用于异型孔空心叶片壁厚检测是可行的。     

圆度仪被测工件的自动对中

对Ｙ９０２５—Ｂ型圆度仪中被测工件的自动对中部分作了较为详细的介绍，其中包括基本工作原理、数据采集、电机控制及有关的软件框图等。该系统能自动把被测工件的偏心调至微米级。     

基于频域分析的ROSAR成像算法

在现有的ROSAR(Synthetic Aperture Radar with Rotating antennas)成像算法中,基于斜距泰勒级数展开的算法存在方位向失配问题,时域相关卷积算法不能快速校正距离弯曲.频域ROSAR成像算法采用驻相点原理,直接对ROSAR回波信号进行二维频域变换,保留回波信号的频谱特征,进而构造相应的频域去耦函数和频域匹配函数,实现频域距离弯曲校正和目标场景重构.仿真结果表明,该算法能够快速校正距离弯曲及有效克服方位向失配问题.