超燃冲压发动机燃烧室主动冷却设计研究

超燃冲压发动机燃烧室主动冷却模型制造和热考核试验的费用高昂、周期长,为了降低试验风险,采用三维计算和经济的验证试验相结合的方法开展了超燃冲压发动机燃烧室主动冷却设计。冷却结构基本参数设计和侧壁冷却流动设计是确定设计方案的两大基础,前者采用三维传热计算结合冷却面板传热验证试验完成,后者采用超临界燃料流动三维并行计算结合水流动验证试验完成。在此基础上,经过多轮的结构设计与三维传热及强度计算评估迭代,确定了最终的燃烧室主动冷却结构。设计的主动冷却燃烧室在来流马赫数2.5,总温1700K条件下成功通过200s热考核试验,表明所采用的设计方法、验证试验和计算工具是有效和可信的。     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

Investigations into sensing characteristics of circular thin-plate electrostatic sensors for gas path monitoring

Circular thin-plate electrostatic sensors are promising in gas path monitoring due to their advantages of non-intrusiveness and easy installation. The spatial sensitivity and filtering effect are two important performance parameters. In this paper, an analytically mathematical model of induced charge on a circular thin-plate electrode is first derived. Then the spatial sensitivity and filtering effect of the circular electrostatic sensor are investigated by numerical calculations. Finally,experimental studies are performed to testify the theoretical results. Both theoretical and experimental results demonstrate that circular thin-plate electrostatic sensors act as a low-pass filter in the spatial frequency domain, and both the spatial filtering effect and the temporal frequency response characteristics depend strongly on the spatial position and velocity of the charged particle. These conclusions can provide guidelines for the optimal design of circular thin-plate electrostatic sensors.     

脉冲雷达凝视模式下低轨碎片相对运动特征分析

脉冲雷达凝视模式是一种探测低轨小碎片的重要方式,其中低轨碎片与雷达的径向运动关系是碎片统计分析的基础.为推算碎片相对雷达的运动特征,基于坐标系的相互转换,先利用雷达测站信息,得到可见碎片在地惯坐标系下的轨道信息;再逆向将目标不同时刻的位置转换至测站坐标系下,得到目标的径向运动特征.在不同要素（雷达波束指向、雷达仰角、测站纬度、目标距离）下,仿真及对比分析了各个参数对速度模糊度、雷达可见性等的影响,得出在凝视模式下目标相对雷达近似做径向匀加速运动,这为后续试验工作提供有力的依据.     

大气层内导弹姿态控制方法研究

本文以大气层内导弹为研究对象,对导弹的姿态控制方法进行研究.根据大气层内导弹运动方程组及空气动力方程等得出导弹的姿态控制系统数学模型.由于导弹的姿态控制数学模型是强耦合、非线性的,因而在控制器设计之前,采用小扰动理论进行线性化处理,得到俯仰、偏航、滚转三个通道的传递函数.针对特征点,采用PD控制方法分别设计三通道的控制律,在此基础上,进一步设计了基于增益调度的PD控制规律.仿真结果表明,提出的姿态控制方法可以实现大气层内导弹的姿态控制,满足指标要求.     

牵制缓释放过程中火箭动力响应特性分析

为研究运载火箭在牵制缓释放过程中的结构动力响应特性,将牵制缓释放发射过程依次分为静态竖立、点火牵制和缓释放三个阶段进行计算。运用MSC.Patran有限元程序的场功能来实现上一阶段的全部计算结果场向下一阶段初始条件场的传递,运用MSC.Nastran有限元程序的非线性弹簧单元的非线性位移载荷函数功能来模拟运载火箭缓释放过程中的缓释力,实现运载火箭牵制缓释放过程结构动力响应的数值计算,并对比分析运载火箭几种常用发射释放方式的结构动力响应特性。结果表明:采用牵制缓释放系统可有效减小运载火箭释放时所受冲击载荷,减小运载火箭全箭结构动力响应。     

Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8?km parachute deployment point distribution error) than the baseline control scheme (8.4?km) and integral control scheme (5.8?km).     

不锈钢管板小群孔加工技术

分析了不锈钢管板加工的难点,介绍了机床和钻头的选择及优化切削参数,获得较好的技术经济效果.     

Noise analysis of continuous GPS coordinate time series for CMONOC

The Crustal Movement Observation Network of China (CMONOC) is one of the major scientific infrastructures, mainly using Global Positioning System (GPS) measurements, to monitor crustal deformation in the Chinese mainland. In this paper, decade-long coordinate time series of 26 continuous GPS sites of CMONOC are analyzed for their noise content using maximum likelihood estimation (MLE). We study the noise properties of continuous GPS time series of CMONOC for the unfiltered, filtered solutions and also the common mode signals in terms of power law plus white noise model. In the spatial filtering, we remove for every time series a common mode error that was estimated from a modified stacking of position residuals from other sites within ∼1000 km of the selected site. We find that the common mode signal in our network has a combination of spatially correlated flicker noise and a common white noise with large spatial extent. We demonstrate that for the unfiltered solutions of CMONOC continuous GPS sites the main colored noise is a flicker process, with a mean spectral index of ∼1. For the filtered solutions, the main colored noise is a general power law process, indicating that a major number of the filtered regional solutions have a combination of noise sources or local effects. The velocity uncertainties from CMONOC continuous GPS coordinate time series may be underestimated by factors of 8–16 if a pure white noise model is assumed. In addition, using a white plus flicker noise model, the median values of velocity errors for the unfiltered solutions are 0.16 (north), 0.17 (east) and 0.58 (vertical) mm/yr, and the median values for the filtered solutions are 0.09 (north), 0.10 (east) and 0.40 (vertical) mm/yr.     

一种用于液晶曝光中的激光检测系统

介绍了一种非接触式激光检测系统，可用于检测液晶曝光中液晶模板与基板之间的间隙，给出了该种系统的测量原理、硬件系统、信号处理方法、测量结果、分辨力和误差分析，并指出了这种测量系统的应用。