网格式肋化通道换热与总压损失特性研究

通过两个实验模型,对矩形网格式肋化通道的换热与总压损失特性进行了实验研究。模型通道的两个宽边是由铝板机械加工而成的肋化壁,两个短边是由胶木板制成的绝热壁。肋化壁上肋与通道轴线所形成的锐角定义为肋向角α,第一个模型的两个宽边上的肋向角分别为45°和-45°(简称45/45模型);第二个模型两宽边的肋向角分别为45°和-60°(简称45/60模型)。两个模型的肋宽与肋间距之比t/p=0.25,肋间距与肋高之比t/e=0.30,肋高与通道高度之比e/H=0.50,即两个肋化壁的肋尖相互接触,从而形成网格式通道。实验表明当雷诺数在0.5×105～1.2×105范围内变化时,网格式内冷通道换热效果比光滑通道提高了5～9倍,但伴随的总压损失增加了3个数量级。      

一种航天测控系统可靠性定量化计算方法

航天测控系统具有动态性、复杂性、可维修性、阶段间相关性等显著特征,作为航天器安全在轨运行的重要保障,其可靠性至关重要。针对航天测控系统可靠性精确计算的难点,提出了综合马尔可夫（Markov）模型和全概率思想的复杂、动态系统可靠性定量化计算方法,给出了计算流程。按照系统的动态组成特性,将任务进程划分为多个阶段,阶段内参试状态不变,不同阶段之间参试状态不同。借鉴Markov模型描述阶段内状态转移过程,通过求解Kolmogorov后向方程得到本阶段结束时的状态概率,利用全概率思想实现阶段间状态映射,体现阶段间的依赖性,依次对各阶段求解获取整个任务可靠性,具有求解准确度高、结果可信度高等特点。最后给出算例,通过与蒙特卡洛仿真结果的比对校验Markov方法的准确性。     

基于3DS MAX模型的无人直升机实时监控系统三维建模

分析OpenGL中三维建模的主要方法,结合共轴式无人直升机实时监控飞行系统的设计需要,得出利用3DS MAX的输出模型进行三维建模可以大大提高效率。分析3DS MAX主要输出文件的结构,指出OpenGL建模所需的要素。设计并实现了3DS MAX到OpenGL的模型转换模块,能够分离出3DS MAX场景中的三维模型,为在实时监控系统中再现3DS模型并构造监控飞行系统的三维场景提供灵活性。     

双S弯二元排气系统遮挡偏距比对壁温与红外辐射影响的试验研究

为了探究不同遮挡偏距比双S弯排气系统的红外特性,试验研究了遮挡偏距比为55%和100%的双S弯二元排气系统的壁面温度分布和红外辐射特性,并与相应的基准轴对称排气系统进行了对比分析。结果表明：S弯喷管壁温整体要比基准轴对称喷管高约25%,第一S弯下游的上壁面附近存在局部高温区,提高S弯喷管遮挡偏距比后,温度梯度加剧,热应力集中。与基准轴对称排气系统相比,55%和100%遮挡偏距比双S弯二元排气系统均具有突出的红外抑制效果,正尾向（α=0°）红外辐射强度分别降低77.7%和79.3%。从温度和红外辐射强度综合评价,遮挡偏距比并非全遮挡最好,遮挡偏距比从55%提高到100%后,仅能有效抑制上方探测面α=5°和10°的红外辐射,而基本不会改变尾向其他探测方向的红外辐射,在工程设计时应权衡优化损失。     

结冰风洞中过冷大水滴云雾演化特性数值研究

为明晰结冰风洞中过冷大水滴（SLD）云雾演化特性,发展了基于欧拉法的SLD液滴运动、传热和传质耦合计算方法,针对3 m×2 m结冰风洞主试验段水平收缩构型,分析了SLD云雾沉降收缩特性、动量平衡特性和热平衡特性,探索了液滴变形破碎的影响,评估了构型出口处SLD液滴动量平衡和热平衡状态。研究结果表明：直径超过250 μm的SLD液滴在构型内会发生显著形变,液滴尺寸越大则变形程度越强,尤其在160 m/s工况下,当液滴直径超过750 μm后,SLD液滴甚至会发生破碎;液滴变形破碎效应会增大液滴加速度和液滴温度下降率,促使SLD液滴趋近动量平衡和热平衡状态;SLD云雾（最大液滴直径小于1 000 μm）在构型出口处会出现显著的粒径浓度分层、动量分层和热分层现象,其中直径小于100 μm的小尺寸液滴速度快、温度低且不断凝结,趋于平衡态,但直径超过500 μm的大尺寸SLD液滴速度慢、温度高且不断蒸发,则显著偏离平衡态;增大试验段气流速度尽管会减弱SLD云雾粒径浓度分层程度,但会增强动量分层和热分层程度,尤其在160 m/s工况下,SLD云雾会均匀分布在构型出口中心区域内（-0.75 m < Y < 0.75 m且-0.5 m < Z < 0.5 m）,与其平衡态间的最大速度差和温度差将分别超过18 m/s和20℃。     

稀薄流航天器鼻锥迎风凹腔气动力和气动热性能研究

本文采用直接模拟蒙特卡罗(DSMC)方法,对高超声速稀薄流中航天器鼻锥迎风凹腔气动力与气动热性能进行了数值研究。得到了鼻锥外壁面、凹腔侧壁面以及凹腔底面的热流密度分布,分析了不同凹腔深宽比对鼻锥冷却效率以及凹腔腔体内气体参数的影响;以深宽比为1的凹腔为基准,研究了凹腔唇口钝化半径对航天器气动热与气动力的影响。数值结果表明,高超声速稀薄流中迎风凹腔能够降低鼻锥外壁面的热流密度;当凹腔深宽比达到1之后,凹腔侧壁面热流变化趋于一致,热流密度最低点的轴向位置不随深宽比改变,且凹腔底部热流很小;凹腔近底部气体均由稀薄流转化为连续流,腔内气体压力不断振荡;唇口钝化没有明显优势,虽然可以降低鼻锥峰值热流,但是会带来严重的气动力性能下降。     

扩展近似时间最优伺服控制及其试验验证

针对带有惯性阻尼环节的典型伺服系统,提出一种能实现大范围快速定点运动的控制方案。控制方案首先利用时间最优控制律进行快速目标追踪,当系统速度下降到一定范围内时平滑切换成线性控制律。采用线性控制区内的闭环极点阻尼系统和自然频率作为设计参数,给出了全参数化的控制律。基于Lyapunov理论分析了控制系统的闭环稳定性。将该控制方案用于一个直流伺服电机的位置-速度环的定点位置控制,并进行了MATLAB数字仿真和基于TMS320F28335 DSC的试验研究。结果表明:所设计的控制系统可以对大范围的给定目标进行快速和准确的跟踪,且对扰动和系统参数差异具有较好的鲁棒性。     

Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine

The heavy fuel compression ignition engines are widely equipped as aircraft piston engines. The fuel injection system is one of the key technologies that determines the performance of engine. One of the main challenges is to precisely control the injected fuel quantity and flow rate in the presence of pressure fluctuation. This challenge is even more serious for heavy fuel. An original design for electrically controlled high pressure fuel injection system called Multi-Pumppressure-reservoirs fuel injection System(MPS) was demonstrated to reduce the pressure fluctuation and help keep injection stable. MPS was compared with an ordinary high pressure Common Rail fuel injection System(CRS). This work established one-dimensional AMESim and mathematical models for both CRS and MPS to study the effect of different structures and geometric parameters on the pressure fluctuations. The calculations show that the average fuel pressure fluctuation of MPS can be reduced by 57% for the crankshaft speed of 1900 r/min, and the pressure fluctuation before injection reduced by 100%. It is concluded that the pressure performance of MPS is less sensitive to pressure reservoir volume than that of CRS, and there is an opportunity for further volume reduction.     

Detection of aerosol pollution sources during sandstorms in Northwestern China using remote sensed and model simulated data

The present paper has used a comprehensive approach to study atmosphere pollution sources including the study of vertical distribution characteristics, the epicenters of occurrence and transport of atmospheric aerosol in North-West China under intensive dust storm registered in all cities of the region in April 2014. To achieve this goal, the remote sensing data using Moderate Resolution Imaging Spectroradiometer satellite (MODIS) as well as model-simulated data, were used, which facilitate tracking the sources, routes, and spatial extent of dust storms. The results of the study have shown strong territory pollution with aerosol during sandstorm. According to ground-based air quality monitoring stations data, concentrations of PM₁₀ and PM_2.5 exceeded 400?μg/m³ and 150?μg/m³, respectively, the ratio PM_2.5/PM₁₀ being within the range of 0.123–0.661. According to MODIS/Terra Collection 6 Level-2 aerosol products data and the Deep Blue algorithm data, the aerosol optical depth (AOD) at 550?nm in the pollution epicenter was within 0.75–1. The vertical distribution of aerosols indicates that the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) 532?nm total attenuates backscatter coefficient ranges from 0.01 to 0.0001?km^?1?×?sr^?1 with the distribution of the main types of aerosols in the troposphere of the region within 0–12.5?km, where the most severe aerosol contamination is observed in the lower troposphere (at 3–6?km). According to satellite sounding and model-simulated data, the sources of pollution are the deserted regions of Northern and Northwestern China.