一种大电流测量系统的设计与应用

针对高频大电流的应用校准需求,提出了一种采用盘式分流器的大电流测试系统。盘式分流器结构采用同轴结构屏蔽外部干扰、减小趋肤效应,选用紫铜金属材料散热性能好,选用宽频大功率电阻减小温度漂移。数据采集卡高速采样可对100 A,10 k Hz电流相关参数进行精确测量。实验结果证明,该系统稳定性好,测量准确度高,可以满足高频大电流测试需求。     

基于叶尖定时的叶片耦合振动参数辨识与仿真

为了实时掌握叶片振动情况、预防故障发生,目前最常用的非接触振动测量方法是基于单自由度模型的叶尖定时法,但当叶片耦合振动时2个振动峰相隔很近,该方法无法同时识别出其振动参数。采用基于2自由度模型的曲线拟合方法,得到叶片耦合振动2个峰的初始相位等参数,用相位遍历法辨识出叶片的振动阶次和频率。结果表明:采用基于2自由度模型的曲线拟合方法提高了叶片耦合振动参数辨识的精度,辨识了相邻2个峰的振动参数。辨识振动与仿真参数设置基本一致。     

球形气囊的超高速撞击损伤特性试验与仿真研究

低成本、可自主展开的气球卫星是未来卫星技术的应用方向之一,而日益增多的空间碎片是低轨航天器,包括气球卫星所面临的主要威胁之一.为满足气球卫星的生存力分析以及在轨被撞击产生空间碎片的评估需求,开展球形气囊超高速撞击试验与仿真研究,获得了不同材质气囊的撞击损伤特性,并初步揭示弹丸贯穿球形气囊过程的破坏细节以及碎片云团特性,...     

固体发动机喷管延伸锥展开前级间分离的热环境分析

通过FLUENT流场计算软件,采用RNGK k-ε湍流模型,针对带有延伸喷管的多级固体发动机级间热分离的热环境进行了数值分析。研究表明,延伸喷管尾流受到连接筒、前封头、延伸段的阻碍后,其流动特征变化显著,尤其在一级前封头的影响下形成回流,并在喷管内形成激波。计算得到的热环境参数,对发动机的热防护设计具有一定的参考价值。     

微纳聚合体卫星的对称式重构规划算法

为解决微纳聚合体卫星变构过程中，聚合体各部分之间的动力学耦合导致的卫星整体姿态翻转或紊乱，提出了一种对称式变构规划算法。首先建立了铰链约束下的漂浮基多刚体系统动力学模型，研究了重构过程中各运动模块对本体姿态的影响，提出当每两个运动模块位置与转动方向满足对称性条件时，两者对本体姿态的影响可在一定程度上相互抵消。基于上述理论，在A*算法中引入最优分配度量和对称性判定，设计了并行对称重构规划算法。仿真结果表明，该规划算法可实现重构过程中多模块并行、对称运动，重构过程总步数较少，运动模块对本体姿态的影响小。     

Maximal admissible mode decision delay in terminal guidance

Mode decision-maker is a critical component in the logic-based Integrated Estimation and Guidance(IEG) system. For the best possible estimation and guidance performance, the mode decision delay of the mode decision-maker should be limited to a range as small as possible. This paper presents a numerical method for computing the maximal admissible mode decision delay that varies with time-to-go. Particular attention has been paid to highly maneuvering target interception in terminal guidance. The results of this research offer useful guidelines for the design of the mode decision-maker in IEG systems.     

Event-triggered attitude control of spacecraft

The problem of spacecraft attitude stabilization control system with limited communication and external disturbances is investigated based on an event-triggered control scheme. In the proposed scheme, information of attitude and control torque only need to be transmitted at some discrete triggered times when a defined measurement error exceeds a state-dependent threshold. The proposed control scheme not only guarantees that spacecraft attitude control errors converge toward a small invariant set containing the origin, but also ensures that there is no accumulation of triggering instants. The performance of the proposed control scheme is demonstrated through numerical simulation.     

高温环境下大尺度薄壁结构的电性能优化设计

考虑温度引起的热变形和材料电磁参数变化对天线罩电性能的影响,基于口径积分-表面积分法(AI-SI)和有限元法(FEM),提出了高温环境下天线罩电性能分析方法;进而基于粒子群算法(PSO),建立了计及热效应的天线罩结构电性能优化流程。分别选取常温环境、均匀高温环境和非均匀高温环境三种典型工况,对比研究了温度对天线罩电性能的影响规律,并对天线罩电性能进行了优化,研究结果表明:高温会引起天线罩透波系数的下降和瞄准误差的上升,在天线罩优化设计中应重视温度对电性能的影响;计及热效应的天线罩结构电性能优化方法能显著提升天线罩的透波系数、降低瞄准误差,具有良好的优化效果。     

Analysis of the data processing strategies of spherical harmonic expansion model on global ionosphere mapping for moderate solar activity

Spherical harmonic (SH) expansion is widely used to model the global ionosphere map (GIM) of vertical total electron content (VTEC). According to the impact of different data processing methods of the SH expansion model on the VTEC maps, we specifically performed comprehensive analysis in terms of the data sampling rate, the time resolution, the spherical harmonic degree, and the relative constraint. One month of GPS data (January in 2016) from the International GNSS (Global Navigation Satellite System) Service (IGS) network in a moderate ionospheric activity period at the descending phase of Solar Cycle 24 was processed. To improve the computational efficiency of the daily GIM generation, the data sampling rate of 5?min was recommended allowing the GIM precision loss within 0.10 TECU (total electron content unit). The global VTEC map could be better represented in temporal and spatial domains with higher time resolution and higher spherical harmonic degree, especially at low latitude bands and in the southern hemisphere. The GIM precision improvement was about 10.91% for 1-h and about 15.15% for 0.5-h compared with the commonly used 2-h time resolution. The use of spherical harmonic degree 17 or 20 instead of 15 could improve the precision by 3.19% or 6.06%. We also found that an optimal relative constraint had to be found experimentally considering both the GIM precision and the GIM root mean square (RMS) map.