航天型号进度控制研究

针对航天型号研制生产的现状,分析了航天型号进度控制的原理,介绍了航天型号进度控制的流程和方法,深入分析了当前进度管理中存在的问题,并结合项目管理理论提出了解决这些问题的总体思路和相应的调整措施。对及时推广和应用先进型号进度控制方法,推动航天型号的持续高速发展具有重要的现实意义。     

一种铍合金材料的结构和性能

对国外某型号飞机所用的铍合金刹车材料进行了密度测试、结构观察、化学元素分析、力学、物理和摩擦性能表征,并与C/C、C/SiC复合材料和粉末冶金材料的相关性能作了对比,结果表明,粉末冶金铍合金材料密度低,力学和摩擦性能优异,是一种很有发展前途的刹车材料.     

基于非线性静力学模型的飞机系留载荷计算方法研究

由于飞机在强风下系留时,机体承受各方向的载荷较大,因此需对系留结构及系留索是否具有足够的承载能力进行分析,而其中系留载荷的计算就显得异常重要。采用MSC．Nastran软件,针对飞机存系留情况下,系留索的单向承载性及起落架与地面的非线性接触特性,通过应用非线性间隙单元,建立了非线性静力仿真模型,并计算了飞机在系留状况下,各系留索承受的张力及各系留点所受的载荷,计算中同时考虑了起落架缓冲支柱空气弹簧力对于系留载荷的影响,从而为飞机系留载荷提供了一种新的有限元计算方法。     

民机预先研究的思考和认识

为贯彻执行公司领导有关推进自主创新和加强预先研究的精神,概括了有关民机预先研究的粗浅思考和认识,为摸清民机技术家底,梳理民机关键技术,编制预研发展规划,加强民机预先研究,实现民机研发体系,在此起到抛砖引玉之功效。     

Variations of ionospheric total electron content before three strong earthquakes in the Qinghai-Tibet region

We investigate the ionospheric total electron content (TEC) anomalies occurred in the Qinghai-Tibet region before three large earthquakes (M > 7.0). The temporal and spatial TEC variations were used to detect the ionospheric possible precursors of these earthquakes. We identified two TEC enhancements in the afternoon local time 9 days and 2–3 days before each earthquake, between which a TEC decrement occurred 3–6 days before earthquakes. These anomalies happened in the area of about 30° in latitude and the maximum is localized equatorward from the epicenters. These TEC anomalies can be found in all three earthquakes regardless the geomagnetic conditions. The features of these anomalies have something in common and may have differences from those caused by geomagnetic storms. Our results suggest that these ionospheric TEC perturbations may be precursors of the large earthquakes.     

TOPSAR data focusing based on azimuth scaling preprocessing

Both Doppler spectral aliasing and azimuth output time folding simultaneously exist in TOPSAR (Terrain Observation by Progressive Scans) raw data. Resampling in both Doppler frequency and azimuth time domain can resolve the azimuth aliasing problem but with the seriously increased computational complexity and memory consumption. According to the special characteristics of TOPSAR raw data support in the slow time/frequency domain (TFD), the presented azimuth scaling preprocessing step is introduced to not only resolve the Doppler spectral aliasing problem but also reduce the increased azimuth samples. Furthermore, the correction of sawtoothed azimuth antenna pattern (AAP) becomes easy to be implemented. The following conventional stripmap processor can be adopted to focus the residual TOPSAR raw data but with the result of azimuth aliased TOPSAR image. The mosaic approach, which has been presented to unfold azimuth aliased ScanSAR image, is exploited to resolve the problem of azimuth output folding in TOPSAR mode. Simulation results and pulse response parameters are given to validate the presented imaging approach.     

发展性教学理论与网络环境下教学改革探讨

本文对赞科夫发展性教学理论的基本观点进行了分析,对发展性教学理论对我国教学改革的影响进行了概括,对发展性教学理论与网络环境下教学改革进行了探讨。     

IEEE1394总线接口设计

IEEE1394总线是一种应用广泛的高速实时传输总线。文章给出了一种基于TSB12LV32和TSB41AB3的IEEE1394总线接口设计方案,并对接口连接进行了详细阐述。使用DSP搭配FPGA构建事务层,与链路层、物理层一起构成完整的IEEE1394通信链路。该方案可以实现链路层和物理层的无缝链接,并且异步事务和等时...     

工艺的模块化

在机械制造生产过程中,由于零件的具体要求和生产条件等诸多因素的不同,制造合格零件的工艺方案也不尽相同。基于航天设计生产制造的特点“小批量、多品种,继承性强”,工艺的模块化对于提高产品质量和生产效率十分重要。     

面向天基监视的红外弱小飞行目标识别算法

针对当前红外弱小飞行目标特征不明显、背景干扰大等问题,提出了一种基于深度学习的红外弱小目标识别算法。检测框架以YOLOv4模型为基础,通过使用K-means++算法对训练集的候选框进行聚类处理,在初始大小的选取上放弃随机生成初始点的方式,在样本集里选取某一个样本作为初始中心使锚框（anchor）大小的选取更加合理。在模型结构中引入卷积注意力模块,使算法模型计算资源分配更合理,对红外弱小飞行目标的特征信息更加敏感。改进空间金字塔池化模块,使用平均池化可以更多保留图像的原始信息,降低天基成像中的噪点与坏点的影响。仿真实验表明采用K-means++计算Anchor大小时准确率可以达到80.13%,在加入了SPP和CBAM模块后之后在测试集上算法识别准确率达到了83.3%,经过对模型的修改有效提升了对红外弱小飞行目标识别的准确率。