Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

关于进行程序管制一体化模拟练习的设想

在程序管制模拟练习中，存在着塔台管制服务、进近管制服务和区域管制服务互不衔接，不能系统地模拟整个管制过程的问题。针对这一情况提出了程序管制一体化模拟练习和程序和管制一体化模拟机的结构设计。     

数据采集系统直流增益和线性度的精确评价

介绍了两种新的精确评价数据采集系统的直流增益和线性度的方法与过程,即“按码精确评价法”和“定间距（为量化误差整数倍）精确评价法”。同时讨论了介绍了的优缺点及应用。     

Characteristics of low-latitude whistlers and their relation with f0F2 and magnetic activity

Some results obtained from the characteristics of low-latitude whistlers received at Wuchang (Geomag. Lat. 19.2°N), Zhanjiang (9.8°N) and Yulin (6.4°N) are presented. The observations cover three years at Wuchang, two years at Zhanjiang, one year at Yulin.     

测量船船摇前馈数据处理方法研究及应用

船摇前馈是航天测量船稳定性设计方法之一。实践证明,船摇前馈对改善系统误差有益,目标速度前馈特别是加速度前馈的改善效果要比船摇前馈的好。分析原因,一方面是目标相对船摇来说变化慢,低频分量多,滤波后能够比较准确地得到所要的值,前馈精度也就高;另一方面是船摇前馈值特别是加速度前馈比较难以准确获得。因此,准确地计算前馈量,是补偿测量设备伺服系统滞后造成的误差,达到高精度地跟踪目标的关键之一。本文详细给出了船摇前馈量的具体计算公式,并在卫星发射任务中进行了应用和验证。     

光学基片表面软质抛光胶体粒子的激光清洗

介绍了光学基片表面软质抛光胶体粒子激光清洗的基本方法、原理和实验装置,并通过对含有污染微粒的基片表面进行激光清洗,获得了高洁净表面的光学基片.     

On the electrodynamics of counter stream in pulsar’s inner annular cap region

The electric properties of pulsar’s inner annular gap are explored in this paper. Under two main assumptions, (1) the pulsar is alive, (2) the total charge of pulsar should not vary with time, the condition for the acceleration of negative particle in the annular region is derived. The acceleration condition is j₋ ? 0.5j₊, i.e., the current carried by negative particles is greater than or equal to 0.5 times of the current carried by positive particles. This condition holds even when the backward flow of positive particles exists in the annular region. It is noted that the outflow of negative particles offers good opportunities to understand the current closure problem of pulsar as well as wide radiation beam of pulsar observed at high energy band.     

SINUMERIK 840D sl完美胜任各种应用需求

SINUMERIK 840D sl可广泛适用于车削、钻削、铣削、磨削、冲压、激光加工等工艺,能胜任刀具和模具制造、高速切削、木材和玻璃加工、传送线等应用场合,既适合大批量生产也能满足单件小批量生产的要求。     

组合机床多轴箱计算机辅助设计系统

介绍利用ＡｏｔｏＣＡＤ二次开发工具ＯｂｊｅｃｔＡＲＸ３．０开发的组合机床多轴箱ＣＡＤ。阐述依据模块化原理设计系统的各个组成模块，以及由于采用ＶｉｓｕａｌＣ＋＋６．０可视化编程语言及微软ＭＦＣ基本类库，使程序界面的交互性比以往设计显著提高。     

基于电流注入法的加速度表测试方法研究

针对不同结构的加速度表 ,从理论上研究了利用电流注入法模拟加速度表运动特性的方法 ,研究了加速度表接入闭环测试系统后的相关问题 ,为加速度表的动态测试提供了新的方法