火星探测用降落伞研制试验简介

文章主要介绍了美国火星探测用降落伞研制过程以及在研制过程中的一些主要试验，并同时指出了试验中的一些特点。     

TC11 粉末钛合金的微观组织及其形成机理

通过旋转电极制粉及后续的热等静压工艺制备了全致密的TC11粉末钛合金,分析了材料的微观组织,通过理论分析和有限元模拟的方式探讨了材料独特的微观组织的形成机理.分析结果表明:粉末冶金TC11的微观组织主要由条片α+相间β相组成,同时还有部分细小的等轴α分布在粉末颗粒界面处.这种独特的微观组织是由两种工艺共同作用产生的.     

新型电子束焊机阴极加热电源自动调节系统

开发了一种新型电子束焊机阴极加热电源自动调节系统,包括新型主电路拓扑和对应控制策略,该系统能够使阴极处在最佳加热电流状态,从而提高电子束流稳定性.并且在检测到电子枪未加高压时,阴极加热电流自动关闭,在加有高压但束流给定为零时,阴极加热电流自动减少,能大幅增加阴极的使用寿命.经试验证明该系统相比传统阴极加热电源操作简洁、快速和准确,对焊缝成形质量好.     

Dynamics and control of spacecraft hovering using the geomagnetic Lorentz force

To achieve hovering, a spacecraft thrusts continuously to induce an equilibrium state at a desired position. Due to the constraints on the quantity of propellant onboard, long-time hovering around low-Earth orbits (LEO) is hardly achievable using traditional chemical propulsion. The Lorentz force, acting on an electrostatically charged spacecraft as it moves through a planetary magnetic field, provides a new propellantless method for orbital maneuvers. This paper investigates the feasibility of using the induced Lorentz force as an auxiliary means of propulsion for spacecraft hovering. Assuming that the Earth’s magnetic field is a dipole that rotates with the Earth, a dynamical model that characterizes the relative motion of Lorentz spacecraft is derived to analyze the required open-loop control acceleration for hovering. Based on this dynamical model, we first present the hovering configurations that could achieve propellantless hovering and the corresponding required specific charge of a Lorentz spacecraft. For other configurations, optimal open-loop control laws that minimize the control energy consumption are designed. Likewise, the optimal trajectories of required specific charge and control acceleration are both presented. The effect of orbital inclination on the expenditure of control energy is also analyzed. Further, we also develop a closed-loop control approach for propellantless hovering. Numerical results prove the validity of proposed control methods for hovering and show that hovering around low-Earth orbits would be achievable if the required specific charge of a Lorentz spacecraft becomes feasible in the future. Typically, hovering radially several kilometers above a target in LEO requires specific charges on the order of 0.1 C/kg.     

自整角机/数字转换器及其应用

介绍了ZSZ系列自整角机／数字转换器的结构，特性和工作原理，以及转换器在实际应用中的接口电路。     

新型聚苯并噁嗪改性树脂的制备与性能

通过预聚反应制备了一种新型聚苯并噁嗪改性树脂.利用FTIR、GPC表征了改性树脂.利用旋转黏度计、DSC、DMA和TGA分别考察了树脂的流动性能、固化行为和改性树脂固化物的热性能.结果表明:制备的苯并噁嗪改性树脂在60～ 100℃,黏度小于500 mPa·s,恒温6h黏度不明显增大,具有良好的流动性能,适用于RTM成型工艺.改性树脂聚合温度较低,具有良好的固化工艺性.改性树脂固化物在氮气气氛下Td5在430℃以上,在900℃的残重高达73.71％,Ts为353.4℃,具有良好热性能.     

太阳光谱辐射强度变化对地球能量平衡的影响分析

目前太阳对地球能量平衡影响的研究大都是以太阳总辐射通量密度作为输入参数的. 本文以美国航空航天局（National Aeronautics and Space Administration,NASA）太阳辐射与气候实验项目的卫星实测数据为基础,对太阳上升相（2010年上半年）和下降相（2007年12月）期间太阳光谱变化对地球能量平衡的影响进行了研究. 结果表明,2010年上半年较强的太阳总辐射通量密度主要是由紫外及红外波段的能量增强引起的,其在200～400nm 和760～4000nm波段内的平均能量分别增加了0.11%和0.05%,而在 400～760nm可见光区的能量却呈减小趋势,平均减小量为0.05%. 通过对MLS2.2全球臭氧日数据进行再分析后发现,相对于2007年12月,2010年上半年平流层臭氧浓度也有所增加,其中在太阳紫外辐射呈现较大增强的2月和3月,其臭氧增量也相对较大,最大值分别出现在33km和40km处,值为0.6mL·m^-3和0.62mL·m^-3. 因此,可见光区能量减弱与平流层臭氧浓度增加的双重削弱作用致使虽然2010年上半年的太阳总辐射通量密度较大,但是到达对流层顶的太阳辐射却有所减小,最大减小量出现在3月,值为0.15W·m^-2. 这一结果说明,太阳活动或总辐射通量密度的增强也有可能对地球对流层系统起到冷却作用.     

Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

基于改进卡尔曼滤波的电池SOC估算

以研究电动汽车动力电池管理系统为背景,以电池荷电状态估算为关键技术,介绍了荷电状态与其主要影响因素的非线性动态关系,建立了二阶RC等效电池模型.在此基础上,考虑了温度对电池内阻的影响,采用卡尔曼滤波算法、改进的安时计量法和开路电压法,结合基于温度的电池模型参数在线辨识,对电池荷电状态进行估算,通过MATLAB仿真,并与基于经验公式的卡尔曼滤波算法进行了对比,平均误差为2.46%,提高了估算精度,验证了算法的可行性和可靠性.      

一种基于N元语法分布的语言模型自适应方法

N元语法分布能恰当地描述语料库的特性,为了有效利用普通领域训练数据,提出一种基于N元语法分布的语言模型自适应方法.该方法定义一个小的领域内的高质量种子集和一个大的普通领域的质量不稳定的训练集,将训练集的N元语法分布自适应到和种子集的N元语法分布相似,以更好地进行特定领域单词识别.实验结果表明,基于N元语法分布的语言模型自适应方法可以使单词困惑度和词错误率分别比传统的简单插值法降低11.1%和6.9%.