穿盖弹射分析与虚拟仿真平台研究

建立了战斗机穿盖弹射救生动力学分析模型,并对穿盖碰撞过程涉及的理论问题进行了描述。通过瞬态动力学工具MSC Dytran仿真得到了人椅系统在穿盖过程中的动态响应以及座舱盖的破坏情况,并与试验进行了对比。在此基础上,以VC/MFC(Microsoft Foundation Class)为工具,借助OpenCASCADE虚拟成形技术,开发了飞机座椅弹射过程的仿真分析平台,具有一定工程使用价值。     

大涵道比涡扇发动机分开式排气系统设计参数影响研究

为了分析外涵可用压比、内外涵出口面积以及核心外罩长度四个参数对大涵道比涡扇发动机分开式排气系统气动性能的影响,以该排气系统为原型采用数值模拟的方法对其性能进行研究。结果表明：存在一个最佳外涵可用压比使推力系数最大,但此时外涵处于欠膨胀状态,其设计规律与单喷管设计不同;存在一个使得推力系数最大的最佳喷管出口面积,此时喷管处于微弱的过膨胀状态,这主要与核心外罩／尾锥上的压强分布有关;核心外罩长度对排气系统性能存在一定程度的影响。     

Time delay of ionospheric TEC storms to geomagnetic storms and pre-storm disturbance events in East Asia

Using the TEC data at Beijing (39.61°N, 115.89°E)/Yakutsk (62.03°N, 129.68°E) stations of East Asia regions and relevant geomagnetic data from 2010 to 2017, we have studied the time delay of ionospheric storms to geomagnetic storms and compare it with our previous results of Taoyuan (25.02°N, 121.21°E) station (Zhang et al., 2020). The data shows a well-known local time dependence of the time delay, and seasonal dependences are different at these stations. In addition, there is no correlation between the time delay and the magnetic storm intensity /solar activity, except the time delay of negative storms has weakly negative dependence on the solar activity. Comparing with the results of Taoyuan station which is located at EIA region in East Asia, we find that the time delay increases nonlinearly as the latitude decreases due to different ionospheric backgrounds at these places. Moreover, the pre-storm disturbance events are found to have similar statistical characteristics as the pre-storm enhancement in Europe middle latitudes (Bure?ová and La?tovi?ka, 2007). By subtracting the common features of the pre-storm disturbance events, we preliminarily infer that auroral activity might be main driver of the pre-storm disturbance events.     

Polysaccharide from Loquat Leaves to Prepare Hierarchical Porous Carbon as a Matrix for Active Sulfur

Fossil fuel exhaustion and overdevelopment usually lead to a recession,which is worsened by the environmental pollution.So it is of high priority to develop high-efficiency energy storage device.Here,agreen and environment-friendly strategy is devised to fabricate carbon materials from biomass.By water extraction and alcohol precipitation,polysaccharide is extracted from loquat leaves.After calcining under high temperature,hierarchical porous carbon materials(HPCM)are obtained,possessing a variety of macropores,mesopores and micropores.Such ample and hierarchical pores enable the electrolyte infiltration and the buffering of the volume expansion of sulfur in repeated electrochemical reactions.The structure stability of the entire electrode can thus be well maintained.When evaluated as the scaffold for sulfur,the electrochemical performance of carbon/sulfur composite was tested.Even after 500 cycles,the reversible capacity is retained as high as 485.4 mA·h/g at the current density of 1.6 A/g.It also offers a notable rate capability,attaining the discharge capacity of 700.7 mA·h/g at 2 C.All the electrochemical performance results prove the feasibility of the proposed strategy.     

Statistical study of energetic electrons in Jupiter’s inner magnetosphere by Juno/JEDI

The Juno spacecraft made the first in-situ observations of energetic particles in the polar region of Jupiter’s magnetosphere. After Jupiter Orbit Insertion (JOI) in July 2016, data from ~20 Juno perijoves (PJs) obtained by Juno/JEDI are accumulated, providing an excellent opportunity to study the long term spatio-temporal distribution of energetic particles in Jupiter’s radiation belt. We transform Juno’s position from a Cartesian to a magnetic coordinate system by tracing magnetic field lines based on a fourth order Runge-Kutta method. Then the fluxes of energetic electrons from PJ1 to PJ14 sorted by different locations in magnetic coordinate space and the data are well organized by the L-shell parameter. The variation of electron flux increases with L-shell. The deviation (the ratio of the 75th percentile to the 25th percentile) of 0.51 MeV electron flux varies from a factor of 1.23 near L = 9.5 to 27.57 near L = 15.5. However, the mean flux decreases by about one order of magnitude in the same region. The electron spectra at larger L-shells are softer than that at smaller L-shells. On the other hand, the electron flux decreases more rapidly with increased L-shell when the location is off the equator. Along an L-shell, the electron flux decrease at first and then increase again from equator to mid-latitude region. In addition, we compare the statistical results with the widely used GIRE2 model. JEDI data correspond well with the GIRE2 model when the L-shell is > 14.75. GIRE2 underestimate the electron flux for L-shell smaller than 13.25. These results of this analysis are applicable to estimate the effects of the radiation environment in Jupiter’s magnetosphere.     

量子计算及其在空气动力学中的应用前景综述

量子计算是最重要的后摩尔计算技术之一，拥有经典计算机无可比拟的超强计算能力，未来能够对各行业应用产生颠覆性的影响。针对量子计算给空气动力学带来的机遇和挑战，详细综述了量子计算机、量子算法、量子底层软件栈等方面的研究进展。结合空气动力学领域常用的基础方法，在综述量子计算线性方程组求解、插值操作、数值积分、优化搜索等最新进展的基础上，结合典型量子算法深入分析了量子计算在空气动力学领域的应用前景，并指出了需要重点关注的研究方向。     

基于受摄轨道模型的小卫星轨道摄动分析研究

小卫星在实际运行中受到多种摄动力的作用,这会对其轨道造成不同程度的影响,因此在小卫星的轨道设计与控制中,摄动是必须考虑的重要因素。本文以500km高的小卫星太阳同步轨道为研究对象,运用轨道摄动的基本理论,估计了地球非球形引力、大气阻力、太阳光压及第三体引力的量级并进行比较;建立小卫星轨道摄动分析模型,并在此模型的基础上,利用计算机仿真技术,对小卫星轨道摄动问题展开仿真研究,验证了几种主要摄动力的量级估计的结果,分析比较了几种主要摄动力对小卫星运行轨道的影响程度及规律,本文结果对小卫星轨道设计与控制具有很好的参考价值。     

基于脉冲星的空间飞行器自主导航技术研究

研究了利用X射线脉冲星实现空间飞行器自主导航的原理,指出通过测量脉冲星发射的脉冲到达航天器与到达太阳系质心的时间差可以确定该航天器的位置。给出了两种适合用于处理脉冲星观测量的方法,即基于最小二乘(LS)的方法和基于卡尔曼滤波(KF)的方法。通过数值仿真验证了X射线脉冲星自主导航技术的可行性,并且说明采用KF算法能够有效利用卫星轨道运动方程中包含的导航信息,从而获得更高的导航精度。     

基于粒子群优化核极限学习机的北斗超快速钟差预报

针对卫星钟差序列中非线性特性较为复杂和超快速钟差预报精度较低的问题,将核极限学习机算法引入到北斗超快速钟差预报中。首先,将极限学习机进行优化,引入粒子群优化算法来选择核极限学习机所需的核参数和正则化参数;然后,将优化后的方法应用到超快速钟差预报中,并给出了利用该方法进行超快速钟差预报的步骤;最后,在分析iGMAS提供的实测北斗超快速钟差数据的基础上,选用单天和多天数据进行短期预报。结果表明：在短期预报6h范围内,利用本文提供的优化方法解算得到的超快速钟差预报精度明显优于二次多项式模型和周期项模型,并且采用此方法得到的超快速钟差预报产品与iGMAS提供的超快速钟差预报产品(ISU-P)相比,GEO、IGSO和MEO卫星的预报精度分别提升了50.51%、46.98%、40.67%,其与最终精密钟差的符合程度显著 增强 。     

基于UG的粉末冶金模具CAD系统研究

介绍了UG二次开发工具,给出了在VC++编译环境下UG二次开发的方法、步骤及界面实现技术,介绍了基于UG的粉末冶金模具CAD系统的结构和功能.