地球同步轨道星地量子信道特性研究

为了研究地球同步轨道量子密钥分发过程中星地量子信道特性，项目团队研制了搭载于实践二十卫星的极弱光偏振态分发设备，开展了地球同步轨道卫星与地面间光子偏振态的传输实验。实验时，星载偏振光分发设备根据遥控指令以50MHz频率驱动四个激光器出光，分发|0〉、|π/2〉、|π/4〉和|3π/4〉四种偏振态光子，经过长距离的空间传输后由地面站望远镜接收，最后由超导探测器探测。研究结果表明，地球同步轨道卫星到地面站的光学链路衰减约为100~110 dB，通道误码率约为2%~8%，满足量子密钥分发误码率的安全性要求。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

液液同轴离心式喷嘴喷雾过程研究进展

内部流动主要研究了流量系数、液膜厚度和气核半径,分析了内部流场,少量研究涉及内外喷嘴液膜互击、液膜表面波振幅和频率等方面。液液喷嘴外部液膜流动及喷雾特性的研究开展较多,观测了不同工况、结构参数下内外液膜流动形态,少数学者使用理论方法分析了液膜破碎机理。对喷雾特性的研究主要是获得了喷雾锥角、破碎长度、液膜振荡频率等的变化规律,并进一步研究了SMD、液滴速度、混合特性等的变化规律。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

Simulation analysis for effects of bone loss on acceleration tolerance of human lumbar vertebra

The purpose of the present study was to analyze and predict the changes in acceleration tolerance of human vertebra as a result of bone loss caused by long-term space flight. A human L3–L4 vertebra FEM model was constructed, in which the cancellous bone was separated, and surrounding ligaments were also taken into account. The simulation results demonstrated that bone loss has more of an effect on the acceleration tolerance in x-direction. The results serve to aid in the creation of new acceleration tolerance standards, ensuring astronauts return home safely after long-term space flight. This study shows that more attention should be focused on the bone degradation of crew members and to create new protective designs for space capsules in the future.     

基于多可信度代理模型的尾喷管优化设计

尾喷管是飞行器机体/推进一体化设计中的关键部件之一,直接影响着飞行器的推阻匹配、俯仰力矩配平等特性。为了提高尾喷管优化设计效率,建立基于多可信度代理模型的多目标优化模型。以基于粗网格、无黏模型的CFD 结果作为低可信度数据,以基于细密网格、SST k-ω 湍流模型的CFD 结果作为高可信度数据,将最大化推力系数、升力系数和俯仰力矩系数作为优化目标,构建Cokriging 模型,并结合NSGA-Ⅱ算法得到Pareto 解集。结果表明：以上三个目标分别提升了2.94%、13.0% 和40.6%,误差低于0.5%,并进行了敏感性分析;优化后流场波系结构更为复杂,改变了壁面压强分布规律;与Kriging 模型相比,Cokriging 模型具有相当的预测性能,构建时间成本节省了62%。     

以可用度为目标的民用飞机不完全预防性维修间隔优化

民用飞机制造商推荐的初始预防性维修间隔通常不考虑运营环境和维修能力的差异,在满足飞机安全性要求的同时,难以达到可用性的最优状态。基于不完全维修理论,采用役龄回退因子修正部件的可靠性模型,以反映维修工作对于部件性能的影响;结合航空公司运行实际情况,以部件可用度为目标函数,可靠度阈值为约束条件,提出不完全维修策略下的预防性维修间隔优化模型,并以某型飞机的空气起动机航线故障数据进行实例验证。结果表明：在满足可靠度阈值的约束条件下,所建立的维修间隔优化模型得出的最优维修间隔与实际相符,该模型合理可行。     

驻涡燃烧室前钝体燃料喷射性能数值分析

为研究驻涡燃烧室在前钝体燃料喷射状况下的燃烧性能,采用3维数值仿真模拟方法,对驻涡燃烧室前钝体燃料喷射 状况下的燃烧效率及燃烧室性能与无前钝体燃料喷射状况下的燃烧性能进行了对比分析,并对驻涡燃烧室的冷流以及燃烧状态 下的燃烧室性能进行了系统研究。燃烧室温度分布表明：前钝体顶部燃料喷射在0.2~0.7的喷射系数范围内,缩短了燃烧室火焰 长度,提高了燃烧室在相同轴向长度下的燃烧效率,使燃烧室更加紧凑;驻涡燃烧室前钝体顶部燃料喷射孔的孔径在一定范围内 的变化对燃烧室的燃烧效率、出口温度分布系数以及总压损失影响较小。     

C/C复合材料喷管烧蚀壁面退移流固耦合仿真研究

为了保障固体火箭发动机C/C喷管的可靠性,建立了一套正确反映发动机喷管烧蚀过程的流固耦合计算模型,以实现对喷管烧蚀率的高精度预估。依据热化学烧蚀理论以及喷管内燃气与喷管结构体界面的质量平衡和能量平衡关系,建立并验证了考虑壁面退移的C/C喷管流固耦合方法,实现了燃气流动、异相化学反应、结构体传热三者间的耦合。通过实验发动机喷管的烧蚀计算,论证了模型的正确性,并分析了不同金属铝含量对烧蚀率的影响,计算所得的烧蚀率与实验值最大相对误差为4.3%,与不考虑壁面退移的耦合算法计算结果对比,计算精度最高可提升46%。计算结果表明：C/C喷管在喉部附近烧蚀最为严重;推进剂中Al含量的增加导致燃气中氧化组分浓度降低,进而减少了烧蚀速率,这些结论与C/C喷管烧蚀相关研究结果一致。